Service Manuals, User Guides, Schematic Diagrams or docs for : IBM 144x H20-0185-1_1440_ATS_termOpe

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download H20-0185-1_1440_ATS_termOpe documenatation <<

Text preview - extract from the document

-=:===- - -
--
___
 -
              -
              -
            1--..--



 -
 -  ==: -.....-
     --
      =---- -
            _--
--~-
=:=   ==-
     - -~-
        -~-

       - ':' -        Application Program                              H20-018S-I




                      144[J/14S[J Administrative Terminal System (ATS)
                      (144[J-CX-[J7X and 14S[J-CX-[J8X)

                      Terminal [Jperator's Manual


                      This system consists of control and functional
                      programs that permit many different text-
                      processing activities to be carried on
                      simultaneously through different terminals.
                      This manual is a reference manual which
                      includes all information required by a
                      t~erminal operator t:o use the program.
This revision (H20-0l85-l) contains many clarifications and Minor
revisions to 1120-0185-0. It should be ~eviewed in its entirety. The
mos~ significant changes are:

     1.   In the section "Storage Reports" all references to the ATTNq
          action should be replaced by references to ATTN !g, for
          Version 2 and later revisions of the program.

     2.   In the section "Storage and Retrieval from Tape", note that
          there is a message "TAPE" printed at the terminal if there
          are any errors in reading ~r writing magnetic tapes. The
          transfer request should be repeated if this message occurs.

     3.   In the section "Upper- and Lowercase Chain Printer Output"
          revised overstrike codes are provided in Version 2 and later
          revisions of the program to permit easy recognition of all
          120 characters.




This publication was prepared for production using the IBM 1440/1460
AdMinistrative Terminal System. Page impressions for photo-offset
printing were obtained from a typewriter terminal and then reduced
15 percent.
Copies of this and other IBM publications can be obtained through IBM
Branch Offices. Comments on this publication should be addressed t:o:
IBH Corporation, Technical Publications Department, 112 East Post
Road, White Plains, New York 10601.
CONTENTS
--
INTRODUCTION          .............................................                                 1

THE 'I.'ERMINAI.I ............................................. .                                   2
General      

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo