Service Manuals, User Guides, Schematic Diagrams or docs for : NEC APC 819-095000-336_dBASEII_Release_Bulletin
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 819-095000-336_dBASEII_Release_Bulletin documenatation <<
Text preview - extract from the document
TM
RELEASE BULLETIN
819-095000-336
dBASE II Model No: APC-S35M
(MS-DOS VERSION)
1.0 INTRODUCTION:
dBASE II software is a database management tool that
allows easy manipulation of small and medium sized data
bases using English-like commands. With dBASE II you can:
o create complete data base systems;
o easily add, delete, edit, display, and print data from
your data base;
o maintain data files with a minimum of data duplication
o generate reports from one or more data bases, auto-
matically producing subtotals, total, headings, and
subheadings
o create command stacks ("programs") to aid in data entry
and retrieval
2.0 CONTENTS OF THE RELEASE:
2.1 Distribution Media
PART NO. DESCRIPTION
8l9-0760,35-050M dBASE II Diskette
2.2 Documentation
PART NO. DESCRIPTION
819-095000-336 dBASE II Release Bulletin
819-000100-8001 dBASE II User's Guide
3.0 HARDWARE/SOFTWARE REOUIREMENTS:
3.1 Minimum Hardware Reguirements
APC-HOI - Monochrome APC with single FDD
3.2 Minimum Software Reguirements
APC-S02 - MS-DOS Operating System
Advanced Personal Computer NJEC
1
NEe Information Svstems,I/Int:-
4.0 INSTALLATION PROCEDURE:
PLEASE NOTE:
1. The distribution diskette is already installed for
the APC. Therefore the files INSTALL.CMD and
STARTUP.PRG are not on your distribution diskette.
2. If you will be using a hard disk, refer to the MS-DOS
Release Bulletin, Section 6, for instructions on
formatting the disk drive.
3. To use the MS-DOS COpy command on a single drive
system, you will need to use a CONFIG.SYS file to
assign addition~l disk buffers. To do this:
a) Create a file named CONFIG.SYS on your bootable
~lS-DOSsystem diskette,' using EDLIN or the COpy
command. This file must contain the statement:
BUFFERS=lO
If CONFIG.SYS already exists on your system
diskette, edit it to delete any other BUFFERS=
statement, and add the BUFFERS=lO statement.
The most convenient way to create CONFIG.SYS is to
use the COpy command to copy from the keyboard to
the CONFIG.SYS file as follows: (User input is
denoted by lower case, but may be entered in either
upper or lower case.)
A>copy con config.sys Press
buffers=lO Press
Press Press
1 File(s) copied
A>
b) Reboot the system diskette. (Press and hold the
and keys together, in
that order. When the screen clears, release the
keys) ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo