Service Manuals, User Guides, Schematic Diagrams or docs for : NOKIA TV nokia_chassis_eurodigi_16-9

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
nokia_chassis_eurodigi_16-9


>> Download nokia_chassis_eurodigi_16-9 documenatation <<

Text preview - extract from the document
                                                              SALORA                                                LUXOR                                             SCHAUB WREN2
7291                                                           28F8                                                 7128                                              7128
dent-No. 5439 47 20                                            Ident-No. 5439 47 60                                 Ident-No. 5439 48 00                              Ident-No. 5439 47 90
:OC) Ident-No. 5439 47 40                                      (U) Ident-No. 5430 04 10                             8228                                              8228
UK) Ident-No. 5439 98 40                                       32F8                                                 Ident-No. 5439 47 80                              Ident-No. 5439 47 70
8291                                                           (C) Ident-No. 5439 47 50                             9128                                              9128
dent-No. 5439 46 70                                            (U) Ident-No. 5430 03 90                             (LX) Ident-No. 5439 46 40                         Ident-No. 5439 46 20
:OC) #A^_. rr"n cn
'#IV\ &I_
     Ident-No. 5439 no00
                    47                                         36F8
,un,
   ,"ellL-IY".3"
         3455
            JO                                                     Ident-No. 5439 46 30
9291                                                           (U)
                                                               (C) Ident-No. 5430 03 80
dent-No. 5430 82 80
dent-No. 5439 46 50
:OC) Ident-No. 5430 83 20
:OC) Ident-No. 5439 46 60
UK) Ident-No. 5430 83 00
I..._. . . . . _.^^ ^^ ^^
,UKJ raenr-No. 34s~ ~6 bu                               ,




Schaltbilder/ Ers.-Teile/ Abgleich/ Rep.-Hilfen                                                                      Circuit diagr./Repl. parts/Adjustment@epair                                        work
3lockschaltbilderl Block diagrams                                                           E...ll-14               Tuner                                                                           SK0...52
>hassis-Schaltbildl Chassis diagram                                                       STB...15-22               AV-ModuV AV module                                                          sTSS...53-55
CCU-RF                                                                                STB-CCU...23-24               PIP-Modull Picture-in-picture                                               STQM...56-66
1\V-Eingangsplattel AV in connector board                                                STEL...25-26               Einstellanweisung                                                            ADJ/l...63-65
Chassisplatte/ Chassis board                                                              STB...27-30               Adjustment                                                                   ADJ11...66-66
3ildrbhrenplatte/ Picture tube board                                                      STH...31-34               Intructions de reglage                                                       ADJ/l...59-61
aed.-Teilplattel Control unit board                                                   SCS-sTS...35-44               lstruzioni di regolazione                                                   ADJ/ll...73-75
Displayplatte/ Display board                                                              SCS...3644                Service mode                                                                   ADJ/ll...76
Kopfh.-Platte/ Headphone board                                                              SCS...36                PAL! SECAM/ NTSC                                                            ADJ/ll...77-78
IR-Sender/ IR transmitte                                                              EESTUL...36-39                Einstelltabellel List if adjustments                                        ADJ/ll...76-72
NICAM-Tonmodull NICAM audio module                                                       STEJ...45-48               Rep.-Hilfe/ Instructions for repair work                                         REP...79
Video-ZF-Mod& Video IF module                                                                STD...49
Audio submodule                                                                          STEQ...50-51

                                                                                                                                                             __
          Ersatzteiie/ Replacement parts                                                                         Baugruppen-Ubersichtl Moduie tabuiar summary
                                                                                                                                  Ersatzteilei Replacement parts


Achtung      I   Bei Reparaturen gijltige Sicherheitsvorschriften              beachten !
Warning      I   Service and repair work to be performed only in armrdance                   with existing safety regulations I
Anmtlon !            En faisant des reparations tenez compte des prescriptions de skurite                 !
Anenzlone        !   Osservare Ie norms di sicurezza vigenti in case di riparazioni             !
Rbntgenverordnung:                 Die in der Rontgenverordnung           festgelegte Ortsdosisleistung   ist bei diesen Geraten durch die Bildrohrentype   und die maximal zulassige Hochspannung
gewahrleistet.
X-ray  regulations:
                 The               picture tube type and the maximum permissible high-voltage ensure that the X-ray intensity within the set remains far below the permisstble value.                    ,
Mglementatlon            portant     cur les rayons    X: La puissance        de dose locale fixbe dans la kglementation     relative aux rayons X es4 garantie   dans le cas de cet appareil   Q&e   au type de
tubs-image       et 1 la haute tension      maximale        admissible.
Regolamento           raggl   x: La potenza    prevista dall disciplina       raggi X per quest0 geners di apparecchio viene garantits dal tip0 di cinescopio e dalla tensfone massima consentita.




     n                        SchutzmaOnahmen fur MOS-Bauelemente beachten !


    0MOS
                              Pay attention to protective measures for MOS components !
                              Respecter les mesures de protections pour les composants de MOS !
                              Osservare le misure protettive per gli elementi costruttivi MOS !

                              Oszillogramm-MeBpunkt / Waveforms measuring point
                              Tous les oscillogrammes / Riferire tutti gli oscillogrammi
     @

Bei Nachbestellungen von Manualen bitte Geratetyp und Gerate-ldentnummer angeben.
When re-ordering manuals, please quote the model name and part number.
En cas de commande supplementaire de manuels veuillez indiquer le typ et le numero
de l'appareil.
                                                                                                                                                                                6611 75 27 (9209)
Per riordinare i manuali, indicare il modello dell'apparecchio ed il numereo categorico.

                                                       kderungsn          vorbehalten / Modifications reserved I Modifications r&e&es       / Con riserva di modifiche
                                                                                                                                                                       - _- - ___
                                                                                                                                                                                mea




                                                                      ;;
                                                                      L


                                                                           II
                                                                                             l3oov



                                                                                                            oa;L+
                                                                                                            2
                                                                                                            z       I
                                                                                                                              08705

                                                                                                                                                                       L
                                                                                                                                                                       %
                                                                                                                                                                                ma



                                                                                                                                                                                ma
    IP SAL0




                                                                                                                                                                       1
                                                                          0a.W                 c1.7.3v                                                                 0
    HYBRID
                                                                          in St-bv             L" St-bv
     HE701                                                   8        10                   11
    _-_----_-_______________                                      _____'______________'-______________~                                                                         II861

                         START                               2,                                                         I
                                                                                                                        I
                    OSCILLATOR                               =                                                          I
                                                                                                                        I
                    IC1/1.1/2                      1                                                                    I
                                                                                                                        I                                   II
                         27kHt                                                                                          I
                                                                                                                        I
                ,                 I                      I                                                                                                  B

                     A                                   I
                                                                                                                        I

                                                                                                                                                    TB701
                         r""              I
                                                                               @   21
                                                                                                w                       i          tt8713                 9
                                                                                                                                                     Q(
                         IC1/3                                                                   TREIBER        M                               _         ,! !
                                                                           d       R47   -                              010
                                                                                                     TWTB               I
                         IC2/1                 v                                                                        I                   g
                                                                                                                        I
                                                                                                                        I
                                                                                                                        I                   k




                     r   ,I?,,,
                         ."_,         _




          I
                         PNY          2                                                                                                                                              TB




          r
                         IC3/1
                         IC3/2                                                                                          I
                                                                                                                        '      15.525kHz                                    c
                         IC3/4
                         ClO/T2                                                                                         I                           -L-
                                                                                                                        I
                                                                                                                        I                           22v
                                                                                                                        I
                                                                                                                        1
    L___c____________________________________________~~~~~~                                                                                         l-                     -..-...
                                                                                                                                                                           Jr=m-b
            5                                                                                         4/15/21                NUR    IN'EIN'ZUSTAND
                                                                                                                                                                             OV=ON
-                                                                                                                           IN'ON'CONOITION              ONLY




                                                                                                                                                                                      IC
                                                       NETZTEIL/ABLENKUNG                                                                                 s3+5v                 1
                                               POWERSUPPLY/OEFLECTION
                                                                                                                                                                  -+
                                              EURO-DIGI-CHASSIS
                                             LOSE KOPPLUNS
                                             LOOSE COUPLINS                          YE SO1
                  ,________________________________________________,

                                                                                                    24kV
                 .jil   ~~+-!:?:::I

                                                                                                I




-9
J
8707         4
                                                                   -+15vica.13vI
                                                                                                                       +2oov

                                                                                                                       -13v
                                                                                                                       12v
                                                                                                                        13v

                                                                                                                        17v
                                       i                   i


       TS701
                                                                                   YESSPULEN
                                                                                   YEASURINS
                                                                                      COIL
                                                                                            \




                                                                                                           lLLL ^_^ . .. ^.
                                                                                                            .. ._
                                                                                                                  BF".,ra Lit-br=O'r'
                                                                                                           ALL VOLT.IN         St-bY'OV




                                                                                                            AOLENKSPULEN
                               TS521              J-LI-L                                                    DEFLECTION   YOKE
                                                               -             TO522




       22v

      l-
N'ZUSTAND
ITION ONLY



                                                                                                               O/I
                                                                                                               E/U
                                                                                                            YOOULATOR
                                                                                                              TES27

                                                                                                               TO528
                                                                                                               TB52S
                                                                                                                                   _--




                                                                                                                              STB...SchaltnetzteiI




                                                                                                                  FflO519 1

                                                     100'I,
                  r                                  t
                                                                                                 1 CB705                                                                                              +2oov

                                 L   023

                                                                                                 -p&
                                                                                                                                                                                                      -13"
                               f,
                                _=                                                                  DB7OS     :
                                                                                                    LlF4007

                                                                                                 11,
                                                                                                                  D67LS




                                                                                      Gcf631     632
                                                                                                                  "FPD




                             ,701
                             `0112
                                           6                                                                                  ..


                             J--
                                                                                                                                          N        I       I
                                                                                                                                           VI      -   &                                        -+    +I,"
                                                                                                                                                               C6604
                                                                                                                                         D860 1
                                                                                                                                                       z       220"
                                                                                                                                         RGP LOG
                                                                                                                              15                               40"
    t   i                                                                                                                                                                                             +1sov




                                                                                                                                                                                      `%0vpp/nEFL.
                                                                                                                                                                                      130O"pp/DEFL.




                                                                      06713                    DB707                      I
                                                                      BA"2L                    UF2D
                                           10                                                                             I
                                                                       N
                                                                                      co707     N
                                                              c0711                   220"
                                                     52       IOU
                                                                              zlIsv            C8706
                                                              16V
                                                                                               I"0
                                           4,15,20



34 H 2.5 Vpp




                        i-                                                                                                               08606                         LB602
                      L_______________________________




38 H 1200   Vpp       B39 H 3 Vpp




                                                                                                                                                                               -16-
Adjustment procedure for 16:9 TV sets

General
The adjustments of the receiver are performed with a remote control handset. Only focus and G2 adjustments are potentiomter adjustments.
The settings have been distributed among 16 adjustment        planes. The usual colour and geometry adjustment routines are performed in
5 adjustment    groups on adjustment planes 1 - 7. Every adjustment group has its own separate adjuster buttons, which trigger different
adjuster functions, depending on the adjustment plane you are currently on (NOKIA/SALORA/LUXOR/SCHAUB            LORENZ Fig. 3 /
Page 72). The digit display blinks during adjusting until the extreme value is reached.
The adjustments are performed in service mode.


Adjustments required for different standards
Certain adjustments must be made for each standard separately on the respective programme position. When the TV is in normal mode,
select the menu display to check the programme standard. In order to adjust different standards you have to preset such a standard to a
programme position (e.g. programme position 1: PAL, programme position IO: SECAM etc.). The tables ( Page 77-78) shows the adjustment
values to be used with each colour system and standard.


Service mode
Access to the service mode is obtained by switching on the receiver with the mains switch Q, and by keying in the following command
within 6 seconds: (Fig. 1 - Page 76/N.B.! Note the type of remote control handset involved !). The display shows the programme
memorys version (01...79). Depending on the type of remote control handset you have , the following buttons are operative in service mode:
(NOKIA/SALORA/LUXOWSCHAUB            LORENZ Fig. 3 / Page 72)


Option bytes
The TV configuration is determined with option bytes. These byte settings are effective on all programme positions when not otherwise stated
(NOKIAISALORAILUXOWSCHAUB                LORENZ Fig. 3/ Page 70-71). An option byte consists of 8 bits.The state of each bit is indicated by the
corresponding segment in the right-hand digit display.
The state of each bit can be toggled with numeric keys 0 to 7. If the segment lights up, corresponding    bit is set to "1". The effect of option
bytes is not visible until returning to the TV mode !


Detailed description of how to adjust colour and geometry,
Using the adjusting table (NOKIA/SALORA/LUXOR/SCHAUB LORENZ                                                        Fig. 3 ! Page 70-72)
Geometry adjustments must be carried out completely after replacement or initialization of memory IC X24C16P (ICB 50). The following
order of adjustments has been found to produce the desired result with the minimum of effort. Adjustments can also be made in another order
or completely separately.
Upon completion of adjustments the settings can be stored all with a single depression of the memory key (MENU or OK/->M) before leaving
the service mode.
Exception
-       Grey scale adjustments have to be stored separately on adjustment group S/adjustment plane 5 or 6.
-       Selecting another programme position is possible in the middle of an adjustment. Non-memorized adjustments                   are not retained   if the
        new programme position has different adjustment values (e.g. another colour system).
SA Colour oscillator        synchronization:     Adjust the colours "upright"   ( Adjust. plane 1 /Adjust.     group 3   )
dL Luminance delay:         For adjustment     use an external   RGB source and video signal in MIX mode. Select programme              position 0. Apply the
R signal to EXTI input pin 15 and video signal to EXTl input pin 20. Connect the Fast Blanking                 pin 16 to R input pin 15 at the EXT socket,
Adjust the RGB and video pictures to the same position ( Adjust. plane 1 /Adjust. group 2 )
dC      Chrominance delay: Using RF test picture, adjust the colour transition to the same position with the luma transition (Adjust               plane     1/
Adjust. group 4 )
Note: If there is no DTI circuit in the system, perform the whole adjustment with ud !
Coarse adjustment of dL and dC without external RGB signal: Adjust dC to the maximum                         with, then decrease   10 steps. Adjust dL to
same phase.
ud      Chroma/luma delay (DTI or no DTI): Adjust ud to align the colour transient to the position of the luminance transition ( Adjust. plane                    7
/Adjust.   group   4   )
SP      Horizontal centering: Center the picture with SP. If the adjustment        is not possible, check dL adjustment       ( Adjust. plane 7 /Adjust.
group      1 1
Note: It helps picture centering if the centre point of the screen is marked on the tube e.g. with a piece of tape.
A0      Vertical shift: Adjust the top border of test pattern ( Adjust. plane 2 /Adjust.      group   1)
HO      Picture height: Adjust the bottom border of the test pattern the amount of half a square beyond the screen ( Adjust. plane 2 /Adjust
group 2)
SO Vertical linearity: Adjust the bottom border of test pattern (Fig. 4 / Page 69) ( Adjust. plane 2 /Adjust. group 3 )
Cl Pincushion distortion correction 2: Depending on the remote control handset type involved, use the AUDIO button                         (NOKIA) or W
( SALORA) or -         ( LUXOWSCHAUB LORENZ) to adjust to the extreme value (picture distortions will occur!), then use VIDEO or b
             to increase by three steps (Fig. 5 / Page 69) ( Adjust. plane 3 /Adjust group 5 )
5 :' rapezium distortion correction 2: Depending on the remote control handset type involved, use button 0                    (NOKIA) or 44
 ( SALORA) or 44 ( LUXORSCHAUB              LORENZ) to stretch the picture far enough to render the bending points (summing points Kl and
K2) clearly visible (Fig. 6a / Page 69). At this juncture, pay no attention to the picture distortion ( Adjust. plane 3 /Adjust group 4 )
Kl      Summing point 1: Adjust summing point Kl to position shown in Fig. 6a (2,5 squares from top). It may be necessary                   to adjust Zl too
( Adjust. plane 4 /Adjust group 7 ) (Fig. 6a + 6b I Page 69)
K2 Summing point 2: Adjust summing point K2 to position shown in Fig. 6a (2,5 squares from bottom). It may be necessary                                  to adjust 21
too ( Adjust. plane 4 /Adjust. group 2 ) (Fig. 6a + 6b / Page 69)
Zl      Trapezium distortion correction 2: Adjust the lines between the summing points as straight as possible; adjustment                        usually at
minimum     ( Aausf. plane 3 / Ac$ust. group 4 ) (Fig. 6a + 6b / Page 69)
ZO      Trapezium distortion correction 1: Straighten the vertical lines at the upper half of the picture without paying attention to what
happens to the lower half of the picture( Adjust. plane 3 /Adjust. group 2 ) (Fig. 6a + 6b / Page 69)
CO        Pincushion distortion correction 1: Straighten the vertical lines at the lower half of the picture. Vertical lines can be straightened                     by
alternately   adjusting 20 and CO ( Adjust. plane 3 /Adjust. group 3 ) (Fig. 5 + 6b / Page 69)
YO        Picture width: Adjust the top corners to correct position ( Adjust. plane            3 /Adjust.   group       1)
CO     Pincushion distortion correction 1: Check the position of the bottom corners. If the picture is not straight between the summing
points, check Cl and 21 adjustments ( Adjust. plane 3/Adjust.    group 3 )
St DTl start time adjustment: Use normal RF signal. Adjust the transients of colour bars to the same postion as the transitions of B/W
picture ( Adjust plane 4 /Adjust. group 4 )
Sp      DIT stop time adjustment: Use normal RF signal. Adjust the transients of colour bars to the same position as the transitions                        of BNV
picture    ( Adjust. plane   4 /Adjust.   group   5   )

Grey Scale Adjustments
G2 Screen grid voltage: Adjust brightness                 and contrast to minimum. Adjust G2 trimmer of the potentiometer            unit on the tube base panel.
Adjustment is correct when neither of the dot LEDs are illuminated in the display. At the same time, the most efficient gun is clamped to a
reference level (cut off voltage approx. 150 V), which is fixed at the lowlight adjustment and cannot be adjusted ( Adjust. plane S/Adjust.
group7 )
CT, CG, cb Black level adjustments:                   Increase contrast to a level where picture is slightly visible. The gun which was set fixed at G2
adjustment can be found at adjustment in which both dot LEDs are illuminated i.e. black level of this particular colour cannot be adjusted.
Adjust the grey scale of test pattern to grey by changing the black level of the two remaining guns ( Adjust. plane 5 /Adjust. group 1+2+3                                )
dr, dG, db            Highlight adjustments: Measure with an oscilloscope             at the bases of transistors        TH 13, TH 23 and TH 33 to check which
colour channel has the maximum preset gain. Leave the oscilloscope to the appropriate base and adjust contrast                         control for a reading of 60 V
from black level to white. Disconnect the oscilloscope. Adjust for normal brightness (all grey bars are discernible)                   ( Adjust. plane  6 /Adjust.
group 1+2+3 )
If the picture is too
-     red, decrease red with dr adjustment until white parts of test pattern turn to white;
-     green, decrease green with dG adjustment until white parts of test pattern turn to white;
-     blue, decrease blue with dB adjustment until white parts of test pattern turn to white.
Check black level adjustments.         If you have to adjust these, then check the highlight adjustments too.
Note: Grey scale adjustments          must be stored on adjustment group 5/adjustment plane 5 or 6 with the key                  MENU or OK/-rM.


Other Adjustments
HA Horizontal adjustment of text             page: Center the teletext page within the screen. At the same time also menus and screen displays are
shifted    ( Adjust plane    7 /Adjust.   group   7   )
CA        Relative contrast of menus: Adjust the contrast of menus, screen displays and teletext (only MIX mode) relative to the contrast of
normal picture     ( Adjust. plane    7iAdjust.   group      2   )
CL      Maximum contrast of teletext page: Adjust the contrast of test pattern to mid-position,                   then adjust white characters   of text for equal
brightness     to the white in the test pattern   ( Adjust. plane     7/Adjust    group    3    )
PH Centering the PIP screen ( Adjust. plane 74 )
PA Colour oscillator sync. of PIP screen: Adjust the                  colours "upright"   ( Adjust. plane    14     )
Note: The PH and PA adjustments            are missing if there is no PIP module in the set.


Focus adjustment
Set contrast close to maximum and brightness               for a well balanced   grey scale. Adjust focus to optimum         using the Focus potentiometer      of the
trimming unit on the tube base panel.


IC identification
On adjustment planes 12 and 13, you can check which ICs are connected to the PC and the bus respectively                             This feature can also be
utilized for fault finding (NOKIAISALORA/LUXOFt/SCHAUB  LORENZ Fig. 3 / Page 70-71)


IC replacement
X24C16P Memory IC ICB 50 (= STB / IC 50):                              If you suspect that some adjustment value prevents the set from starting up
replace the memory IC with one which is O.K. and contains                 sufficient initializing values - e.g. preprogrammed spare memory IC (Fig. 7            /
Page 62)
NVM 3060 EEPROM memory ICBM 1
lnitializing memory ICs ICB 50 and ICBM 1 : lnitializingreplaces the values stored in memory IC ICB 50 with new ones (from ICB 2). The
picture will not be perfect when using the initialized values.
1.     Disconnect the mains plug.
2.     Switch the TV on with the mains switch.
3.     Reinsert the mains plug and within 6 seconds press the following buttons consecutively (depending on the type of remote control
       handset involved): (NOKIA) MUTE / m            / m / or ( SALORA)       II / I / b / lb or (LUXOWSCHAUB LORENZ)
       +/l       /I,/,,/.
The TV is switched on to programme position 1 after initializing. Channel 24 and PAL B/G standard will have been stored on all programme
positions. After initialization check the options and perform all adjustments.
ecu      3000     Control   unit ICB l!
FA...     Programme    memory      ICB 2: Check whether the new IC is of the same type. If the spare IC differs from the older one, other
modifications may be necessary.         Check to see whether   corresponding   modification    instructions   have been supplied with the IC or c0ns.L
service bulletins.
MCU 2600 Clock generator                 ICB 80: Check SA (Colour synchronization)

ACVP 2205 Video processor                   ICB 230: Check SA (Colour synchronization),        ud (Chrominance       delay   / not DTI) or dL ( Luminance
delay) and dC (Chrominance       delay / DTI present)
SPU 2243          SECAM     prozessor     ICB 220: Check ud (Chrominance       delay / no DTI) of the SECAM standard             or dL (Luminance     delay)
dC (Chrominance     delay / DTI present)
DTI 2250        Transient     improvement      processor   ICB 240: Check St (DTI start time) and Sp (DTI stop time) of the standards               in use.
ud (Chrominance    delay/no    DTI), dL (Luminance      delay) and dC (Chrominance     delay    / DTI present)
TPU 2735          Teletxte processor ICB 250: Check HA (Teletext horizontal centering)              and CA (Contrast,        Menu & MIX)
VCU 2136          Video coder/decoder ICB 201: Check G2, cr (Black level, red), cG (Black level, green), cb (Black level, blue), dr (Gain
red), dG (Gain, green), db (Gain, blue) and CA (Contrast,        Menu & MIX)
DPU 2553          Deflection processor: Check the geometry           adjustments   of all standards    in use
TDA 8172          Vertical output stage ICB 570: Check picture height, position of top border and thereafter                  East/West adjustments

NVM 3060          EEPROM       memory,      PIP ICQM 203: lnitialize the IC and perform PH (Horizontal          centering,   PIP) and PA (Colour
synchronization,    PIP) adjustments
lnitialization
1.       Switch the TV on with the mains switch.
2.      Within 6 seconds after switching on the TV press the following buttons consecutively (depending on the type of remote control hand,
        onvolved): (NOKIA) MUTE /c@ / m           or ( SALORA)       II / I / b / lb or ( LUXOWSCHAUB LORENZ) + / I / lb I
lnitialize the IC and perform PH (Horizontal centering, PIP) and PA (Colour synchronization,   PIP) adjustments
%...Tuner       TU 1011
STD...      IF amplifier: Check automatic channel search, EXTl, different receiving bands and tuner AGC (tuner pin 2) 7 V for 1,5 - 2 mV
aerial signal
STH...      Tube base panel: Check G2, Focus, cr (Black level, red), cG (Black level, green), cb (Black level, blue), dr (Gain, red), dG
(Gain, green) and db (Gain, blue)




Instruction         for NVEDIT programme                        (16:9 TV sets / phase I)
The colour menu software from version FA20 on (SALORA, LUXOR and SCHAUB LORENZ) and the TV Mouse software from version
FA102.0 on (NOKIA) include NVRAM (EEPROM) editing software. NVRAM (EEPROM) memories include user settings, initial values for Ill
chip set and production data. These values can be changed from the user interface in the service mode by using the production computer
the NVEDIT programme.
Warning    ! The NVEDIT programme is a very dangerous tool. It reads and writes directly to EEPROM                           memories.   If you do not exactly
know what you are doing, please do not use the NVEDIT programme !
Modifications      in EEPROM register bits may be needed in following cases:
-  In production has been used unproper value that has be corrected as a service treatment;
-  The EEPROM initialization programme does not match to the DSP and other It's status, mask versions etc.;
-  In service is used older or newer DSP IC mask version that predicts some register value adaption;
-  The TV is customized by some special demand.
To start the NVEDIT programme
1.    Go to the service mode
2.    Select the NVEDIT programme.         The password is:
      red I blue / green I yellow        (SALORA, LUXOR. SCHAUB         LORENZ)
      ZOOM I VOLUME - I TEXT             (NOKIA)
3.    The display shows
      - status row
      - warning info
      - EEPROM selection       row (preset is TV EEPROM)
To use the NVEDIT programme
1.    The active EEPROM    memory can be selected using the following colour buttons:
      - Red = TV                     (The size is 16 KBits and it is located on the main board)
      - Green = PIP                  (The size is 4 KBits and it is located on the PIP module)
      - Yellow = NVM                 (The size is 4 KBits and it is located on the main board)
2.    Decimal address and data can be given to the active field using the number buttons. Unfinished or incorrect addresses and unfinished
      data selection can be aborted using the " i " button (SALORA, LUXOR, SCHAUB LORENZ) or the "ALl" button (NOKIA). After the las
      address digit has been entered, the programme shows the current data and after the last data digit, the programme stores automatica
      the new data to the active EEPROM memory.
3.    Note the maximum values which can not be exceeded:
      - Maximum address value for TV memory = 2047
      - Maximum address value for PIP and NVM memories = 0511
   - Maximum data for all memories = 255
To exit from NVEDIT programme
-  Press the STANDBY button
         Einstelltabelle / List of adjustments / Liste de reglage / Elenco delle regolazioni

          STEP   +I-




                                                                                                                                                                                                                                                               Chrominance      del
                                   Horizontal  centering                                                           Luminance    delay                                                          Colour synchronization
                                   Horizontale  Bildverschiebung                                                   Luminanzverzogerung                                                         Farbsynchronisierung                                            ChrominancelLu
                                   Cadraga horizontal                                                              Retardemant    de la luminance                                              Syncronisation    couleurs
                                   Centratura orizzontale                                                          Ritardo di luminanza                                                        Sincronizzazione     colore


                                  A0               i-717                                               :           HO           HL?                                                             so             so
                                  Vertical centering                                                                                                                                           Vertical linearity

         2. ~~~                                  @~
                                  Cadragevertica,e
                                  Vertikale Bildverschiebung
                                                                                                           "" if;;:,                                                                           Vertikale Linearitiit
                                                                                                                                                                                               Linearit   verticale
                                  Centratura       verticale                                                      Ampiezza      verticale                                                      Linearit& verticale


                                  YO               %!7                                                             zo           1'17                                               "`. co cL7                                                                  Zl          i-1
                                  Width                                             Ed                 "!         Trapezium   distortion    correction 1         ta                `*" Pincushion distortion             correction 1      IElI                Trapezium   distor
         3. %I                    Breite
                                  Largeur
                                                                                                                  1. Korrektur der Trapezverzerrung
                                                                                                                  Correction   de trapeze 1
                                                                                                                                                                                               1. Korraktur der Kissenverzerrung
                                                                                                                                                                                               Correction   ast-ouast 1
                                                                                                                                                                                                                                                               2. Korraktur der 1
                                                                                                                                                                                                                                                               Correction   de tra
                                  Ampiezza        orizzontale                                                     COrreziOne   dell'effetto   trapezia 1                                       Correzione   dell'affetto  cuscino 1                            Correzione   dell%


                                   Kl             [I                                                    .:. K2 I- i'                                                                                                                                           St          5r
                                  Summing    point 1
                                                                               I                       `. Summing point 2                                   I.                     :(
                                                                                                                                                                                                                                                               DTI start time
         4.1'       I             Summierungspunkt
                                  Point d'addition  1
                                                                1                                                 Summierungspunkt
                                                                                                                  Point d'addition 2
                                                                                                                                               2
                                                                                                                                                                                        )I
                                                                                                                                                                                                                                                               Einschaltzeitpunl
                                                                                                                                                                                                                                                               Moment de d4mr
                                  Punto di somma 1                                                                Punto di somma 2                                                                                                                             Punto d'inizio del


                             .'   cr              cf-                                       .          .`l         CG            c ci                                              :_"         cb             ch                                :       1_     co            l-0
                                                                                    m                  _`.' Black        level, green                            m                .`I          Black level. blue                           0            i.,    Contrast
         5. 1: 1'                 EE~~~g$~;ouge                                                                   Schwarzpegel,     GrOn                                                       Schwarzpegel,     Blau                                          Kontrast
                                                                                                        `(i       Blocage du canal vert                                                        Blocaga du canal bleu                                           Contraste
                                  Cut-off    del rosso                                                            Cut-off del Verde                                                            Cut-off del blu                                                 Contraste


                             9    dr              L+-                                       R           ". dG                    66                                   G                        db              ulb                              B              co            l-a
                                  Gain, red                                         0.`                           Gain. green                                    cl                ;           Gain, blue                                  cl           `-'    Contrast
         6. t:h-                  Verstlrkung,
                                  Gain, Rouge
                                               Rot
                                                                                                       in *.
                                                                                                                  Verstlrkung.
                                                                                                                  Gain, vert
                                                                                                                                  GrOn                                                         VerstPrkung,
                                                                                                                                                                                               Gain, bleu
                                                                                                                                                                                                               Blau                                            Kontrast
                                                                                                                                                                                                                                                               Contrast9
                                  Guadagno del rosso                                                          .   Guadagno     del Verde                                                       Guadagno     del blu                                            Contraste


                                  HA               NR                             x                      .' CA                   CN                                   (>            "<.~
                                                                                                                                                                                       CL                      cL                               a              co            L-a
                                                                                enu
                                                                              SF+
                                  Teletext horizontal   centering                                                 Contrast,   Menu & MIX                          Menu i"'                     Contrast,      Teletext                 Textn/                  Contrast
        7.1-11-r                  Horizontale  Bildverschiebung,
                                  Centrage horizontal     de t&texte
                                                                     Videotext                        ." i.       Kontrast.
                                                                                                                  Contraste
                                                                                                                              Menu 8 MIX
                                                                                                                               Menu 8 MIX                            MIX           1;
                                                                                                                                                                                    :
                                                                                                                                                                                               Kontrast,
                                                                                                                                                                                               Contraste
                                                                                                                                                                                                              Videotext
                                                                                                                                                                                                               tbl&xte                  Max
                                                                                                                                                                                                                                                               Kontrast
                                                                                                                                                                                                                                                               Contraste
                                  Cpntratura  orizzontale   dal t&video                                           Contrasto   del menu 8 MIX                                                   Contrast0       del t&video                                     Contras&


                                                                                                                  Bii 2 UHF only IO = no I 1 = yes                                             Bii 5 A2 Stereo IO = no / 1 = yes
                                                                                                                  Bit 3 TUNER        / 0 = Salcomp        / 1 = NSF                            Bii6    AVConnectorsIO=no/~            =yes
                                                                                                                  Bii 4 DTI IC IO = no I 1 = yes


L

                                                                    Bit0   PALCClR/O=no/l                  =yes                             Bit4   NTSC4,4MHzIO=no/i                         =yes
                                                                    Biil   PALUK/O=no/l               =yes                                  Bit5   NTSC3,56MHz/O=no/l                         =yes

lb                                                                  Bii2
                                                                    Bit3
                                                                           SECAMElO=noIl
                                                                           SECAMLIO=no/l
                                                                                                           =yes
                                                                                                           =yes
                                                                                                                                         .Bt 6 SECAM
                                                                                                                                            BR7
                                                                                                                                                             video / 0 = no I 1 = yes
                                                                                                                                                   NTSC3,58MHzVideo/O=no/l                            =yes


.
                                                                Bit 1 16:9 / 0 = no I 1 = yes

.b                                                              BP 2 0 = Normal
                                                                Bit 3 Video identfication
                                                                                            use I 1 = Production
                                                                                                     startfromstandby
                                                                                                                         mode
                                                                                                                                (EXTl)
                                                                                                                                                                                                v.9l/o=lvpp/l=2vpp
                                                                                                                                                                                                ACVP)      / 0 = no / 1 = yes
                                                                           o=no/1          =yes


                                  Byte 4                        Bit0       WIDE/O=noll              =yes
                                                                                                                                                                         Bit 4 DTI / 0 = no / 1 = yes
                                                                Bii 1 LOUDNESS               IO = no I 1 = yes

    b                                                           Bii 2 PROGRAMME
                                                                Bit3       VOLUMEBAR/O=no/l=yes
                                                                                                  INFO IO = no I l= yes
                                                                                                                                                                         Bit 5 Time out / 0 = no / 1 = yes
                                                                                                                                                                         Bit 6 Vertical         blanking
                                                                                                                                                                         Bit 7 S-Filter IO = no I 1 = yes
                                                                                                                                                                                                             / 0 = DPU / 1 = PIP




                                                                Bit 0 Tuner/        IC2/ TV tuner PLU TSA 551 I                                            Bit 4 STSSl      ICOO7/ Crosspoint              2 switch/ TEA 64151 Record select
                                                                Bit 1 STEJ/ IC401/ IF I-O/ PCF 65741 FM radio                                              Bit 5 STSS/      ICOOl/ Interface          I-O/ PCF 6574/ Rec. select, SCARTP            &   ?`,

    b                                                           Bit 2 STEJi
                                                                Bit 3 STSS/
                                                                                    ICZOO/ FM PLU TSA 60571 FM radio
                                                                                    ICOO3/ Cross point 1 switch/ TEA 6415/
                                                                                                                                                                  SCART3
                                                                                                                                                           Bit 6 STSS/
                                                                                                                                                                                 video & SCARTl3
                                                                                                                                                                            ICOO5/ Interface
                                                                                                                                                                                                               16:9 identification
                                                                                                                                                                                                      2 I-O/ PCF 6574/ Fixed level RCA output           ' `:
                                                                           SCART3.         Record select                                                   Bit 7 STSSi      ICOOZ/ Audio c&s                 11 TEA 64201 SCARTS,     Record select     : `1


                        "' ,"     1M        ( &    1 I C)       Bit 0 STB/ IC250/ TPUl TPU 2735
                                                                Bit 1 STEM/         IC301/ PIP DPU/ VSP 2660/ PIP                                                Bit 4    STSSl     ICOO6/ Audio            cross 21 TEA 6420/ Ramrd       select

    b                                                           Bit 2 STQM/
                                                                Bit 3 STBM/
                                                                                    IC203/ PIP memory/
                                                                                    ICl/    Added    memory/
                                                                                                                    NVM 3060/ PIP
                                                                                                                     NVM 3060/
                                                                                                                                                                 Bit 5    free
                                                                                                                                                                 Bit 6 STQMl        ICZOl/ Video switch IC/ TEA 6415




    b
                                                                                                                                                                                                             Selezione   programma   PIP
                        .^        Centratura      oriztontale        PIP                                          Sincronizzazione       colore,    PIP



    b                                                                                                                                                                                                                           



◦ Jabse Service Manual Search 2019 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo