Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent 5989-7643EN W2635A & W2636A DDR3 BGA Probe Adapter for Infiniium oscilloscopes c20140903 [12]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 5989-7643EN W2635A & W2636A DDR3 BGA Probe Adapter for Infiniium oscilloscopes c20140903 [12] documenatation <<

Text preview - extract from the document

Keysight Technologies
W2635A and W2636A DDR3 BGA Probe
Adapter for Infiniium Oscilloscopes
Superior probing for DDR3 compliance test and debug




                                          Data Sheet
02 | Keysight | W2635A and W2636A DDR3 BGA Probe Adapter for Infiniium Oscilloscopes - Data Sheet


The Keysight Technologies, Inc. W2635A and W2636A DDR3 BGA probe adapters provide signal
access to the clock, strobe, data, address and command signals of the DDR3 BGA package for making
electrical and timing measurements with an Infiniium oscilloscope. The DDR3 JEDEC1 specification
(JESD79-3C) is defined at the DRAM ballout, and the ballout is difficult to access. The BGA probe
adapter provides direct signal access to the BGA package for true compliance testing.

The W2635A and W2636A DDR3 BGA probe adapters are soldered in between the DRAM and PC
board or DIMM raw card where the DRAM would normally be soldered. They are designed with the
PCB or DIMM footprint on the bottom side and the DRAM footprint on the top side. The BGA adapter
passes the signals from the memory controller chip and DRAM directly to the top side of the BGA
probe adapter where they can be accessed with oscilloscope probes.

Buried resistors placed at the signals inside the BGA probe adapter connect the probed signals to
solder pads designed to work with Keysight InfiniiMax E2677A, N5381A, N5425A, and N5426A
differential solder-in probe heads. These resistors isolate the DDR3 signal and the probe loading
effect. This design minimizes capacitive loading of the probe heads and allows high-speed operation
without impact on signal integrity.

Probing at the right location is also an important consideration for DDR3 measurement. Many designs
have vias or designed-in probe points, but they do not always produce good signal integrity. Probing
at the wrong location could cause signal reflection, resulting in non-monotonic edges. This will cause
error in your tests such as slew rate, setup and hold time measurements.

When used with Keysight's U7231A DDR3 compliance test application, the BGA adapter provides
a fast and easy way to test, debug and characterize your DDR3 designs. The tests covered by the
U7231A software are based on the JEDEC (JESD79-3C) DDR3 SDRAM Specification. The test
application offers a user-friendly setup wizard and a comprehensive report that includes margin
analysis.

1 The JEDEC (Joint Electronic Device Engineering Council) Solid State Technology Association is a semiconductor engineering
  standardization body of the Electronic Industries Alliance (EIA), a trade association that represents all areas of the electronic
  industry.
03 | Keysight | W2635A and W2636A DDR3 BGA Probe Adapter for Infiniium Oscilloscopes - Data Sheet



Superior probing for DDR3 compliance test and debug
Features

  

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo