Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent 5991-0439EN N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer - Data Sheet c20140505 [22]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 5991-0439EN N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer - Data Sheet c20140505 [22] documenatation <<

Text preview - extract from the document

Keysight N4375D
26.5 GHz Single-Mode
Lightwave Component Analyzer


                               Data Sheet
General Information

     Keysight Technologies' N4375D Lightwave Component Analyzer (LCA) is the instrument of choice to
     test 10G Ethernet, FCx8, FCx10 and FCx16 electro-optical components, with up to 26.5 GHz modula-
     tion range as well as electro-optical components for 40/100GbE and 100 Gb/s coherent transmission.

     Modern optical transmission systems require fast, accurate and repeatable characterization of
     the core electro-optical components, the transmitter, receiver, and their subcomponents (lasers,
     modulators and detectors), to guarantee performance with respect to modulation bandwidth, jitter,
     gain, and distortion of the final transceiver.

     The N4375D guarantees excellent electro-optical measurement performance through NIST traceable
     factory calibration chain. In addition a unique new calibration concept significantly reduces time from
     powering up the LCA until the first calibrated measurement can be made. This increases productivity
     in R&D and on the manufacturing floor.

     The fully integrated "turnkey" solution reduces time to market, compared to the time-consuming
     development of a self-made setup.

     The electrical and optical design of the N4375D is optimized for lowest noise and ripple. In addition,
     this design makes the accuracy independent of the electrical reflection coefficient. It's the excellent
     accuracy and repeatability that improves the yield from tests performed with the N4375D, by narrow-
     ing margins needed to pass the tested devices. NIST traceability ensures world-wide comparability of
     test results.

     The advanced optical design together with temperature-stabilized transmitter and receiver ensures
     repeatable measurements over days without recalibration.

     Using the advanced measurement capabilities of the network analyzer, all S-parameter related char-
     acteristics of the device under test, like responsivity, ripple, group delay and 3 dB-cutoff frequency,
     can be qualified with the new N4375D Lightwave Component Analyzer from 10 MHz to 25.6 GHz.

     The network analyzer
     The N4375D LCA is based on the new 2- and 4-port N5222A PNA Series microwave network analyzer
     with an identical and well known user interface across all Keysight network analyzers. Versions
     with configurable test set and bias-T integrated in the network analyzer are available. The High RF
     output power ensures a higher optical modulation index (OMI). This gives you the freedom to change
     between small signal analysis and large signal analysis of your device under test. True mode balanced
     measurements are possible with 4-port, dual source network analyzers.
03 Keysight N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer



General Information (continued)
Key benefits
 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo