Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent 5991-3676EN Waveguide Power Sensors - Data Sheet c20141030 [6]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 5991-3676EN Waveguide Power Sensors - Data Sheet c20141030 [6] documenatation <<

Text preview - extract from the document

Keysight Technologies
Waveguide Power Sensors



                          Data Sheet
Make accurate and reliable measurements in the 50 to 110 GHz
frequency range with Keysight's family of waveguide power sensors.
Covering the V-band, E-band and W-band spectrums, Keysight's waveguide power sensors offer best SWR, high
reliability and low loss, and come with a 50 MHz calibration port to reduce measurement uncertainties. And with
the Keysight E8486A (Option 200) waveguide sensor, you also get a wide dynamic range spanning from -60 dBm to
+20 dBm.


Compatible with Your Current Keysight Power Meter
Keysight waveguide power sensors are fully compatible with Keysight EPM (E4418B/19B, N1913A/14A), EPM-P
(E4416A/17A) and P-Series (N1911A/12A) power meters. The V8486A and W8486A are also compatible with the
discontinued or obsolete power meters such as 435B, 436A, 437B, 438A, 70100A, E1416A, E4418A, and E4419A
power meters.

Best SWR Available
In RF and microwave power measurements, the largest single source of error is usually sensor and source mismatch.
To minimize any measurement uncertainty caused by mismatch, Keysight waveguide sensors offer excellent SWR of
1.06 (>30 dB return loss).

50 MHz Calibration
For easy calibration with the power meter, Keysight waveguide power sensors incorporate a 50 MHz calibration port.
This eliminates the variance in making measurements with different meter/sensor combinations and the uncertain-
ties due to temperature changes. It also provides traceability to the U.S National Institute of Standards and Technol-
ogy (NIST) at millimeter-wave frequencies.

High Reliability
Keysight waveguide sensors use the same proven Modiied Barrier Integrated Diode (MBID) technology found in
other Keysight sensors, and always operates in the square-law characteristic for true-average detection.



Waveguide power sensors comparison table

Model          Frequency range        Power linearity1                 Maximum power                       Connector type
E8486A-100     60 GHz to 90 GHz       

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo