Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent English _ 2013-12-01 _ PDF 150 KB 54932-92003 c20131113 [4]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![English _ 2013-12-01 _ PDF 150 KB 54932-92003 c20131113 [4]](/pics/5c4d6d752d189.gif)
>> Download English _ 2013-12-01 _ PDF 150 KB 54932-92003 c20131113 [4] documenatation <<
Text preview - extract from the document
Safety Information
The following general safety precautions must be observed during all
phases of operation of this instrument. Failure to comply with these
precautions or with specific warnings or operating instructions in the
product manuals violates safety standards of design, manufacture, and
intended use of the instrument. Agilent Technologies assumes no liability
for the customer's failure to comply with these requirements. Product
manuals are provided with your instrument on CD- ROM and/or in printed
form. Printed manuals are an option for many products. Manuals may also
be available on the Web. Go to www.agilent.com and type in your product
number in the Search field at the top of the page.
General Do not use this product in any manner not specified by the manufacturer.
The protective features of this product may be impaired if it is used in a
manner not specified in the operation instructions.
Before Applying Verify that all safety precautions are taken. Make all connections to the
Power unit before applying power. Note the instrument's external markings
described in "Safety Symbols".
Ground the If your product is provided with a grounding type power plug, the
Instrument instrument chassis and cover must be connected to an electrical ground to
minimize shock hazard. The ground pin must be firmly connected to an
electrical ground (safety ground) terminal at the power outlet. Any
interruption of the protective (grounding) conductor or disconnection of
the protective earth terminal will cause a potential shock hazard that
could result in personal injury.
Part number 54932-92003, December 2013
*54932-92003* s1
Fuses See the user's guide or operator's manual for information about line- fuse
replacement. Some instruments contain an internal fuse, which is not user
accessible.
Do Not Operate in Do not operate the instrument in the presence of flammable gases or
an Explosive fumes.
Atmosphere
Do Not Remove Only qualified, service- trained personnel who are aware of the hazards
the Instrument involved should remove instrument covers. Always disconnect the power
Cover cable and any external circuits before removing the instrument cover.
Cleaning Clean the outside of the instrument with a soft, lint- free, slightly
dampened cloth. Do not use detergent or chemical solvents.
Do Not Modify Do not install substitute parts or perform any unauthorized modification
the Instrument to the product. Return the product to an Agilent Sales and Service Office
for service and repair to ensure that safety features are maintained.
In Case of Instruments that appear damaged or defective should be made inoperative
Damage and secured against unintended operation until they can be repaired by
qualified service personnel.
A CAUTION notice denotes a hazard. It calls attention to an operating procedure,
CAUTION
practice, or the like that, if not correctly performed or adhered to, could result in
damage to the product or loss of important data. Do not proceed beyond a CAUTION
notice until the indicated conditions are fully understood and met.
A WARNING notice denotes a hazard. It calls attention to an operating procedure,
WA R N I N G
practice, or the like that, if not correctly performed or adhered to, could result in
personal injury or death. Do not proceed beyond a WARNING notice until the
indicated conditions are fully understood and met.
2
Safety Symbols
Table 1 Description of Safety related symbols that may appear on a product (Sheet 1 of
2)
Symbol Description
Direct current
Alternating current
Both direct and alternating current
Three phase alternating current
Earth ground terminal
Protective earth ground terminal
Frame or chassis ground terminal
Terminal is at earth potential
Equipotentiality
N Neutral conductor on permanently installed equipment
L Line conductor on permanently installed equipment
On (mains supply)
Off (mains supply)
3
Table 1 Description of Safety related symbols that may appear on a product (Sheet 2 of
2)
Symbol Description
Standby (mains supply). The instrument is not completely disconnected from the
mains supply when the power switch is in the standby position
In position of a bi-stable push switch
Out position of a bi-stable push switch
Equipment protected throughout by DOUBLE INSULATION or REINFORCED
INSULATION
Caution, refer to accompanying documentation
Caution, risk of electric shock
Do not apply around or remove from HAZARDOUS LIVE conductors
Application around and removal from HAZARDOUS LIVE conductors is permitted
Caution, hot surface
Ionizing radiation
CAT I IEC Measurement Category I
CAT II Measurement Category II
CAT III Measurement Category III
CAT IV Measurement Category IV
4
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo