Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent HP 71209A Series System Folder HP 70902A - Service Guide
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download HP 70902A - Service Guide documenatation <<
Text preview - extract from the document
Service Guide
HP 70902A
IF Section
ABCDE
HP Part No. 70902-90079
Printed in USA December 1992
Notice.
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including
but not limited to, the implied warranties of merchantability and tness for a particular
purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
Copyright Hewlett-Packard Company 1988, 1992
c
All Rights Reserved. Reproduction, adaptation, or translation without prior written
permission is prohibited, except as allowed under the copyright laws.
1212 Valley House Drive, Rohnert Park, CA 94928-4999, USA
Certification
Hewlett-Packard Company certi es that this product met its published speci cations at the
time of shipment from the factory. Hewlett-Packard further certi es that its calibration
measurements are traceable to the United States National Institute of Standards and
Technology, to the extent allowed by the Institute's calibration facility, and to the calibration
facilities of other International Standards Organization members.
Warranty
This Hewlett-Packard instrument product is warranted against defects in material and
workmanship for a period of one year from date of shipment. During the warranty period,
Hewlett-Packard Company will, at its option, either repair or replace products which prove to
be defective.
For warranty service or repair, this product must be returned to a service facility designated
by Hewlett-Packard. Buyer shall prepay shipping charges to Hewlett-Packard and
Hewlett-Packard shall pay shipping charges to return the product to Buyer. However, Buyer
shall pay all shipping charges, duties, and taxes for products returned to Hewlett-Packard
from another country.
Hewlett-Packard warrants that its software and rmware designated by Hewlett-Packard for
use with an instrument will execute its programming instructions when properly installed on
that instrument. Hewlett-Packard does not warrant that the operation of the instrument, or
software, or rmware will be uninterrupted or error-free.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate
maintenance by Buyer, Buyer-supplied software or interfacing, unauthorized modi cation or
misuse, operation outside of the environmental speci cations for the product, or improper
site preparation or maintenance.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. HEWLETT-PACKARD
SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusive Remedies
THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE
REMEDIES. HEWLETT-PACKARD SHALL NOT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
Assistance
Product maintenance agreements and other customer assistance agreements are available for
Hewlett-Packard products.
For any assistance, contact your nearest Hewlett-Packard Sales and Service Oce.
iii
Safety Notes
The following safety notes are used throughout this manual. Familiarize yourself with each of
the notes and its meaning before operating this instrument.
Caution Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, could result in damage to or destruction
of the instrument. Do not proceed beyond a caution sign until the indicated
conditions are fully understood and met.
Warning Warning denotes a hazard. It calls attention to a procedure which, if not
correctly performed or adhered to, could result in injury or loss of life. Do
not proceed beyond a warning note until the indicated conditions are fully
understood and met.
L
Instruction The instruction manual symbol. The product is marked with this symbol when it is
Manual necessary for the user to refer to the instructions in the manual.
iv
General Safety Considerations
Warning Before this instrument is switched on , make sure it has been properly grounded
through the protective conductor of the ac power cable to a socket outlet
provided with protective earth contact.
Any interruption of the protective (grounding) conductor, inside or outside
the instrument, or disconnection of the protective earth terminal can result in
personal injury.
Warning There are many points in the instrument which can, if contacted, cause personal
injury. Be extremely careful.
Any adjustments or service procedures that require operation of the instrument
with protective covers removed should be performed only by trained service
personnel.
Caution Before this instrument is switched on, make sure its primary power circuitry
has been adapted to the voltage of the ac power source.
Failure to set the ac power input to the correct voltage could cause damage to
the instrument when the ac power cable is plugged in.
v
Servicing at a Glance
vi
The HP 70902A IF section is an IF module that is used in HP 70000 Series modular spectrum
analyzer systems. A standard modular spectrum analyzer system includes a mainframe with
an RF section, IF section, local oscillator, an optional display, and an optional precision
frequency reference.
Documentation and software supplied
This service guide is part of an Option 915 package which includes:
HP 70902A Service Guide
HP 70902A Component Level Information Packages
Five disks containing module veri cation software.
Tools and equipment needed
Before servicing, refer to Chapter 2 for a list of the tools and equipment that may be needed
during servicing.
Antistatic precautions
Electrical components are easily damaged by small amounts of static electricity. If possible,
work at a static-safe work station. For further information, refer to \Electrostatic Discharge
Information" in Chapter 2.
vii
In This Book
This book is part of an Option 915 documentation package which consists of a service guide,
a component-level information packages manual, and software disks that contain module
veri cation software.
It describes all of the service procedures necessary to test, adjust, troubleshoot, and repair
an HP 70902A IF section in an HP 70000 Series modular spectrum analyzer system. Each
module in the HP 70000 Series modular spectrum analyzer system has its own service guide.
For further information related to the servicing of additional and alternate modules that can
be used in this system, refer to that module's service guide.
Service Guide
Chapter 1 answers the questions \What is service?" and \When is service needed?" It then
describes the procedures used to return your HP 70902A IF section to Hewlett-Packard for
servicing.
Chapter 2 contains a list of recommended test equipment, a listing of a general service kit
for HP 70000 modular measurement system modules, documentation on the HP 70902A
Option K01 IF section, and information on electrostatic discharge (ESD).
Chapter 3 contains information needed to use module veri cation software.
Chapter 4 contains information on the tests used to verify module operation.
Chapter 5 contains information about the procedures needed to adjust the module after a
repair.
Chapter 6 contains module-level troubleshooting procedures, error-code de nitions, and
block diagrams.
Chapter 7 contains instructions for removal and replacement of all major assemblies.
Chapter 8 contains information needed to order mechanical parts and replacement board or
cable assemblies for the module.
Chapter 9 contains gures identifying all major assemblies and cables.
An index is also added at the end of this service guide to aid the user in nding key items
of interest.
Component-Level Information Packages
The component-level information packages manual contains packets of component-level
repair information for each HP 70902A IF section board assembly that has eld-replaceable
parts. Each packet includes the parts list, component-location drawing, and schematics for
a speci c board-assembly part number. This chapter also contains a table cross-referencing
board-assembly version and module serial pre x.
Before you begin servicing, you must become familiar with module veri cation software. For
information on how to use module veri cation software, refer to Chapter 3.
viii
Contents
1. Getting Started
What is servicing? . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
When is servicing needed? . . . . . . . . . . . . . . . . . . . . . . . 1-2
If you want Hewlett-Packard to service your HP 70902A IF section . . . . . 1-3
Determining your HP 70902A IF section's serial number . . . . . . . . . 1-3
Returning your HP 70902A IF section for service . . . . . . . . . . . . 1-4
2. Recommended Test Equipment
Service Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
21.4 MHz Notch-Filter Documentation . . . . . . . . . . . . . . . . . . 2-9
Electrostatic Discharge Information . . . . . . . . . . . . . . . . . . . 2-11
Reducing ESD Damage . . . . . . . . . . . . . . . . . . . . . . . 2-12
PC Board Assemblies and Electronic Components . . . . . . . . . . . 2-12
Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Static-Safe Accessories . . . . . . . . . . . . . . . . . . . . . . . . 2-13
3. Module Veri cation Software
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Computer Compatibility . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Computer Language Compatibility . . . . . . . . . . . . . . . . . . 3-2
Printer Compatibility . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . 3-3
Con guring the Hardware . . . . . . . . . . . . . . . . . . . . . . . 3-4
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Installing Module Veri cation Software . . . . . . . . . . . . . . . . . 3-5
Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Module Veri cation Software Overview . . . . . . . . . . . . . . . . . 3-7
Testing Multiple Modules . . . . . . . . . . . . . . . . . . . . . . 3-7
Error Messages or Warnings De ned . . . . . . . . . . . . . . . . . 3-7
Final Tests De ned . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Single Tests De ned . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Printing Test Results . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Edit and Command Screen Menus . . . . . . . . . . . . . . . . . . 3-9
Edit Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Command Screen Menus . . . . . . . . . . . . . . . . . . . . . . 3-10
Cursor Keys and Menu Selections . . . . . . . . . . . . . . . . . . 3-11
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Main Menu Softkeys . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Mass Storage Menu . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Contents-1
Mass Storage Menu Edit Screen . . . . . . . . . . . . . . . . . . 3-12
Mass Storage Menu Command Screen . . . . . . . . . . . . . . . . 3-12
Parameter Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Parameter Menu Edit Screen . . . . . . . . . . . . . . . . . . . . 3-13
Parameter Menu Command Screen . . . . . . . . . . . . . . . . . 3-14
Equipment Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Equipment Menu Edit Screen . . . . . . . . . . . . . . . . . . . . 3-14
Equipment Menu Command Screen . . . . . . . . . . . . . . . . . 3-15
Edit Calibration Data . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Edit Calibration Data Edit Screen . . . . . . . . . . . . . . . . . 3-16
Edit Calibration Data Command Screen . . . . . . . . . . . . . . . 3-17
HP-MSIB Address Menu . . . . . . . . . . . . . . . . . . . . . . . 3-17
Test Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
Test Menu Command Screen . . . . . . . . . . . . . . . . . . . . 3-19
Error and Status Messages . . . . . . . . . . . . . . . . . . . . . . . 3-25
4. Module Veri cation Tests
Preferred Frequency-Reference Connections . . . . . . . . . . . . . . . 4-2
1. Front Panel LED Check . . . . . . . . . . . . . . . . . . . . . . 4-4
2. Diagnostic Detectors Check . . . . . . . . . . . . . . . . . . . . 4-5
3. 18.4 MHz Oscillator Stability Test . . . . . . . . . . . . . . . . . 4-7
4. DUT Calibration . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
5. Average Noise Test . . . . . . . . . . . . . . . . . . . . . . . . 4-12
6. Corrected Sensitivity Test . . . . . . . . . . . . . . . . . . . . . 4-14
7. Third-Order Intercept Test . . . . . . . . . . . . . . . . . . . . 4-16
8. Spurious Responses Test . . . . . . . . . . . . . . . . . . . . . 4-18
9. Resolution Bandwidths Test . . . . . . . . . . . . . . . . . . . . 4-20
10. Video Bandwidths Test . . . . . . . . . . . . . . . . . . . . . 4-23
11. Module Gain Test . . . . . . . . . . . . . . . . . . . . . . . . 4-25
12. Calibration Attenuator Test . . . . . . . . . . . . . . . . . . . 4-27
13. Corrected Module Fidelity Test . . . . . . . . . . . . . . . . . . 4-29
14. Crystal Spurs Test . . . . . . . . . . . . . . . . . . . . . . . . 4-32
15. Rear-Panel Auxiliary Port Test . . . . . . . . . . . . . . . . . . 4-34
16. Front-Panel Auxiliary Port Test . . . . . . . . . . . . . . . . . . 4-37
17. Auxiliary Video Test . . . . . . . . . . . . . . . . . . . . . . . 4-41
18. Limited IF Output Check . . . . . . . . . . . . . . . . . . . . 4-45
5. Adjustment Procedures
1. 21.4 MHz Input Bandpass Filter Adjustment . . . . . . . . . . . . . . 5-2
2. LC Bandwidth Filter Adjustment . . . . . . . . . . . . . . . . . . 5-4
3. Crystal Bandwidth Filter Adjustment . . . . . . . . . . . . . . . . . 5-6
4. Bandwidth Filter Amplitude Adjustment . . . . . . . . . . . . . . . 5-8
5. Step Gain/Calibration Attenuator Adjustment . . . . . . . . . . . . . 5-10
6. Log Ampli er Adjustment . . . . . . . . . . . . . . . . . . . . . . 5-12
7. Module Gain Adjustment . . . . . . . . . . . . . . . . . . . . . . 5-14
8. Bandwidth Filter Final Adjustment . . . . . . . . . . . . . . . . . . 5-16
9. Bandwidth Filter DAC Optimization . . . . . . . . . . . . . . . . . 5-19
Contents-2
6. Troubleshooting
Adjustment Reference-Designation Information . . . . . . . . . . . . . . 6-2
Power-Up Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Usage/Operating Errors . . . . . . . . . . . . . . . . . . . . . . . 6-5
Hardware Warning Errors . . . . . . . . . . . . . . . . . . . . . . 6-5
Hardware Broken Errors . . . . . . . . . . . . . . . . . . . . . . . 6-5
Circuit Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Signal Path Description . . . . . . . . . . . . . . . . . . . . . . . 6-6
A1 Board Assembly Signal Path . . . . . . . . . . . . . . . . . . 6-6
A2 Board Assembly Signal Path . . . . . . . . . . . . . . . . . . 6-6
A3 and A4 Board Assemblies . . . . . . . . . . . . . . . . . . . . 6-6
LC and Crystal Filter Description . . . . . . . . . . . . . . . . . . . 6-7
Troubleshooting the Board Assemblies . . . . . . . . . . . . . . . . . . 6-8
A1 Downconverter Board Assembly . . . . . . . . . . . . . . . . . . 6-8
Input Buer . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
21.4 MHz Level Detector . . . . . . . . . . . . . . . . . . . . . . . 6-8
18.4 MHz Local Oscillator . . . . . . . . . . . . . . . . . . . . . 6-8
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Step-gain Ampli ers . . . . . . . . . . . . . . . . . . . . . . . . 6-9
1 dB, 2 dB, 4 dB, 8 dB, and . . . . . . . . . . . . . . . . . . . . 6-11
Attenuator Control . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Variable-Gain Ampli er . . . . . . . . . . . . . . . . . . . . . . 6-12
A2 Log Ampli er/Power Supply Board Assembly . . . . . . . . . . . . 6-12
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Log Ampli er/Detection . . . . . . . . . . . . . . . . . . . . . . 6-13
Limited IF Output . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Video Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
A3 MSIB Control Board Assembly . . . . . . . . . . . . . . . . . . 6-18
HP-MSIB Interface . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Diagnostics Interface . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Central Processing Unit (CPU) . . . . . . . . . . . . . . . . . . . . 6-19
Calibration Attenuator Controls . . . . . . . . . . . . . . . . . . 6-19
Filter Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20
A4 Front-Panel Board Assembly . . . . . . . . . . . . . . . . . . . 6-20
Troubleshooting Veri cation Test Problems . . . . . . . . . . . . . . . 6-21
Test 1. Front-Panel LED Check . . . . . . . . . . . . . . . . . . . 6-21
Test 2. DUT Calibration . . . . . . . . . . . . . . . . . . . . . . . 6-21
Test 3. Average Noise Test . . . . . . . . . . . . . . . . . . . . . . 6-21
Test 4. Corrected Sensitivity Test . . . . . . . . . . . . . . . . . . . 6-21
Test 5. Third Order Intercept Test . . . . . . . . . . . . . . . . . . 6-22
Test 6. Spurious Responses Test . . . . . . . . . . . . . . . . . . . 6-22
Test 7. Resolution Bandwidths Test . . . . . . . . . . . . . . . . . . 6-22
Test 8. Video Bandwidths Test . . . . . . . . . . . . . . . . . . . . 6-22
Test 9. Diagnostic Detector Check . . . . . . . . . . . . . . . . . . 6-22
Level Detector 1 . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
Level Detector 2 . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
Test 10. Module Gain Test . . . . . . . . . . . . . . . . . . . . . . 6-22
Test 11. Calibration Attenuator Test . . . . . . . . . . . . . . . . . 6-23
Test 12. Corrected Module Fidelity Test . . . . . . . . . . . . . . . . 6-23
Contents-3
Test 13. Crystal Spurs Test . . . . . . . . . . . . . . . . . . . . . 6-23
Test 14. Rear-Panel Auxiliary Port Test . . . . . . . . . . . . . . . . 6-23
Test 15. Front-Panel Auxiliary Port Test . . . . . . . . . . . . . . . 6-23
Test 16. Auxiliary Video Test . . . . . . . . . . . . . . . . . . . . 6-23
Test 17. Limited IF Output Check . . . . . . . . . . . . . . . . . . 6-23
Test 18. 18.4 MHz Oscillator Stability Test . . . . . . . . . . . . . . 6-23
Troubleshooting Adjustment Problems . . . . . . . . . . . . . . . . . . 6-24
Adjustment 1. 21.4 MHz Input Bandpass Filter Adjustment . . . . . . . 6-24
Adjustment 2. LC Resolution Bandwidth Filter Adjustment . . . . . . . 6-24
LC Center Frequency . . . . . . . . . . . . . . . . . . . . . . . 6-24
LC Amplitude . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25
LC Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25
Adjustment 3. Crystal Resolution Bandwidth Filter Adjustment . . . . . 6-25
Crystal Symmetry and Dip . . . . . . . . . . . . . . . . . . . . . 6-25
Noise Check . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26
Crystal Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . 6-26
18.4 MHz Local Oscillator Frequency and Crystal Center . . . . . . . 6-26
Adjustment 4. Bandwidth Filter Amplitude Adjustment . . . . . . . 6-26
10 Hz Amplitude . . . . . . . . . . . . . . . . . . . . . . . . . 6-27
Crystal to LC Filter Gain . . . . . . . . . . . . . . . . . . . . . 6-27
Adjustment 5. Step Gain/Calibration Attenuator Adjustment . . . . . 6-27
Step-Gain Ampli ers . . . . . . . . . . . . . . . . . . . . . . . 6-27
Calibration Attenuators . . . . . . . . . . . . . . . . . . . . . . 6-27
Adjustment 6. Log Ampli er Adjustment . . . . . . . . . . . . . . . 6-27
Adjustment 7. Module Gain Adjustment . . . . . . . . . . . . . . . . 6-28
Absolute IF Gain . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
Total Module Gain . . . . . . . . . . . . . . . . . . . . . . . . 6-28
Adjustment 8. Bandwidth Filter Final Adjustment . . . . . . . . . . . 6-28
Adjustment 9. Bandwidth Filter DAC Optimization . . . . . . . . . . . 6-28
7. Replacement Procedures
Module Right-Side Cover . . . . . . . . . . . . . . . . . . . . . . . 7-2
Module Version without Top Clamp . . . . . . . . . . . . . . . . . . 7-2
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Module Versions with Top Clamp . . . . . . . . . . . . . . . . . . . 7-3
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Module Left-Side Cover . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Module Version without Top Clamp . . . . . . . . . . . . . . . . . . 7-6
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Module Versions with Top Clamp . . . . . . . . . . . . . . . . . . . 7-6
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Contents-4
A1 Downconverter . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
A2 Log Ampli er/Power Supply . . . . . . . . . . . . . . . . . . . . 7-15
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
A3 MSIB Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
A4 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
8. Replaceable Parts
Overall Module Parts Identi cation Format . . . . . . . . . . . . . . . 8-2
Replaceable Parts List Format . . . . . . . . . . . . . . . . . . . . . 8-2
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Direct Mail-Order System . . . . . . . . . . . . . . . . . . . . . . 8-3
Direct Phone-Order System . . . . . . . . . . . . . . . . . . . . . 8-4
Regular Orders . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Hotline Orders . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Module Body/Cover/Top-Clamp Versions . . . . . . . . . . . . . . . . 8-5
Version 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Related Parts . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Retro t Information . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Related Parts . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Retro t Information . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Version 3 (Preferred Replacement) . . . . . . . . . . . . . . . . . . 8-6
Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Related Parts . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Retro t Information . . . . . . . . . . . . . . . . . . . . . . . . 8-6
9. Major Assembly and Cable Locations
Index
Contents-5
Figures
1-1. Typical Serial Number Label . . . . . . . . . . . . . . . . . . . . . 1-3
2-1. 21.4 MHz Notch Filter, Schematic Diagram . . . . . . . . . . . . . . 2-9
2-2. Typical Filter Stopband . . . . . . . . . . . . . . . . . . . . . . . 2-10
2-3. Static-Safe Workstation . . . . . . . . . . . . . . . . . . . . . . . 2-11
3-1. Main Menu Softkeys . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
3-2. Mass Storage Menu and Parameter Menu Softkeys . . . . . . . . . . . 3-22
3-3. Equipment Menu and HP-MSIB Map Screen Menu Softkeys . . . . . . . 3-23
3-4. Test Menu Softkeys . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
4-1. Preferred Frequency-Reference Connections . . . . . . . . . . . . . . 4-3
4-2. LED Check Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
4-3. Diagnostic Detectors Check Setup . . . . . . . . . . . . . . . . . . . 4-6
4-4. 18.4 MHz Oscillator Stability Test Setup . . . . . . . . . . . . . . . . 4-8
4-5. DUT Calibration Setup . . . . . . . . . . . . . . . . . . . . . . . 4-11
4-6. Average Noise Test Setup . . . . . . . . . . . . . . . . . . . . . . 4-13
4-7. Corrected Sensitivity Test Setup . . . . . . . . . . . . . . . . . . . 4-15
4-8. Third-Order Intercept Test Setup . . . . . . . . . . . . . . . . . . . 4-17
4-9. Spurious Responses Test Setup . . . . . . . . . . . . . . . . . . . . 4-19
4-10. Resolution Bandwidths Test Setup . . . . . . . . . . . . . . . . . . 4-22
4-11. Video Bandwidths Test Setup . . . . . . . . . . . . . . . . . . . . 4-24
4-12. Module Gain Test Setup . . . . . . . . . . . . . . . . . . . . . . . 4-26
4-13. Calibration Attenuator Test Setup . . . . . . . . . . . . . . . . . . 4-28
4-14. Corrected Module Fidelity Test Setup . . . . . . . . . . . . . . . . . 4-31
4-15. Crystal Spurs Test Setup . . . . . . . . . . . . . . . . . . . . . . 4-33
4-16. Rear-Panel Auxiliary Port Test, Calibration Setup . . . . . . . . . . . 4-35
4-17. Rear-Panel Auxiliary Port Test, Measurement Setup . . . . . . . . . . 4-36
4-18. Front-Panel Auxiliary Port Test, Calibration Setup . . . . . . . . . . . 4-39
4-19. Front-Panel Auxiliary Port Test, Measurement Setup . . . . . . . . . . 4-40
4-20. Auxiliary Video Test, Calibration Setup . . . . . . . . . . . . . . . . 4-43
4-21. Auxiliary Video Test, Measurement Setup . . . . . . . . . . . . . . . 4-44
4-22. Limited IF Output Check Setup . . . . . . . . . . . . . . . . . . . 4-46
5-1. 21.4 MHz Input Bandpass Filter, Calibration Setup . . . . . . . . . . . 5-3
5-2. 21.4 MHz Input Bandpass Filter, Adjustment Setup . . . . . . . . . . . 5-3
5-3. LC Bandwidth Filter Adjustment Setup . . . . . . . . . . . . . . . . 5-5
5-4. Crystal Bandwidth Filter Adjustment Setup . . . . . . . . . . . . . . 5-7
5-5. Bandwidth Filter Amplitude Adjustment Setup . . . . . . . . . . . . . 5-9
5-6. Step Gain/Calibration Attenuator Adjustment Setup . . . . . . . . . . 5-11
5-7. Log Ampli er Adjustment Setup . . . . . . . . . . . . . . . . . . . 5-13
5-8. Module Gain Adjustment Setup . . . . . . . . . . . . . . . . . . . 5-15
5-9. Bandwidth Filter Final Adjustment Setup . . . . . . . . . . . . . . . 5-18
5-10. Bandwidth Filter DAC Optimization . . . . . . . . . . . . . . . . . 5-21
7-1. Module Casting, Cover, and Top-Clamp Areas That Must Make Good
Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Contents-6
7-2. Module Right-Side Cover Removal/Replacement . . . . . . . . . . . . 7-5
7-3. Module Left-Side Cover Removal/Replacement . . . . . . . . . . . . . 7-7
7-4. Front Panel Removal/Replacement . . . . . . . . . . . . . . . . . . 7-9
7-5. Rear Panel Removal/Replacement (1 of 2) . . . . . . . . . . . . . . . 7-11
7-5. Rear Panel Removal/Replacement (2 of 2) . . . . . . . . . . . . . . . 7-12
7-6. A1 Removal/Replacement . . . . . . . . . . . . . . . . . . . . . . 7-14
7-7. A2 Removal/Replacement . . . . . . . . . . . . . . . . . . . . . . 7-16
7-8. A3 Removal/Replacement (1 of 2) . . . . . . . . . . . . . . . . . . . 7-18
7-8. A3 Removal/Replacement (2 of 2) . . . . . . . . . . . . . . . . . . . 7-19
7-9. A4 Removal/Replacement . . . . . . . . . . . . . . . . . . . . . . 7-21
8-1. Overall Module Parts Identi cation, Front Panel . . . . . . . . . . . . 8-12
8-2. Overall Module Parts Identi cation, Rear Panel . . . . . . . . . . . . . 8-13
8-3. Overall Module Parts Identi cation, Top View . . . . . . . . . . . . . 8-14
8-4. Overall Module Parts Identi cation, Bottom View . . . . . . . . . . . 8-15
8-5. Overall Module Parts Identi cation, Side Views with Covers . . . . . . . 8-16
8-6. Overall Module Parts Identi cation, Side Views without Covers . . . . . . 8-17
9-1. Major Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
9-2. Rear-Panel Connector \J" Designations . . . . . . . . . . . . . . . . 9-3
Contents-7
Tables
1-1. Packaging and Contents . . . . . . . . . . . . . . . . . . . . . . . 1-5
1-2. Hewlett-Packard Sales and Service Oces . . . . . . . . . . . . . . . 1-6
2-1. Recommended Test Equipment . . . . . . . . . . . . . . . . . . . . 2-1
2-1. Recommended Test Equipment (2 of 4) . . . . . . . . . . . . . . . . 2-2
2-1. Recommended Test Equipment (3 of 4) . . . . . . . . . . . . . . . . 2-3
2-1. Recommended Test Equipment (4 of 4) . . . . . . . . . . . . . . . . 2-4
2-2. Recommended Test Accessories . . . . . . . . . . . . . . . . . . . . 2-5
2-2. Recommended Test Accessories (2 of 3) . . . . . . . . . . . . . . . . 2-6
2-3. Recommended Test Accessories (3 of 3) . . . . . . . . . . . . . . . . 2-7
2-4. Contents of the HP 71000 system service kit (HP part number 71000-60002) 2-8
2-5. 21.4 MHz Notch Filter, Required Parts . . . . . . . . . . . . . . . . 2-9
2-6. Static-Safe Accessories . . . . . . . . . . . . . . . . . . . . . . . . 2-13
6-1. Cross Reference of Adjustment Names . . . . . . . . . . . . . . . . . 6-2
6-2. HP 70902A IF section LC and Crystal Filter Locations . . . . . . . . . 6-7
6-3. A1 LC and Crystal Filter PIN Diodes . . . . . . . . . . . . . . . . . 6-9
6-4. A1 Filter-Shorting Control Lines and Diodes . . . . . . . . . . . . . . 6-9
6-5. Step-Gain Control Lines . . . . . . . . . . . . . . . . . . . . . . . 6-10
6-6. Step-Gain Ampli er Settings . . . . . . . . . . . . . . . . . . . . . 6-11
6-7. Calibration Attenuator Control Lines . . . . . . . . . . . . . . . . . 6-12
6-8. A2 LC and Crystal Filter PIN Diodes . . . . . . . . . . . . . . . . . 6-13
6-9. A2 Filter-Shorting Control Lines and Diodes . . . . . . . . . . . . . . 6-13
6-10. Video-Bandwidth Selection Control Lines . . . . . . . . . . . . . . . 6-14
6-11. Video-Bandwidth Control-Line Logic Settings (Firmware Versions Earlier than
850912) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
6-12. Video-Bandwidth Control-Line Logic Settings (Firmware Versions 50912 and
Later) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
6-13. A3U7 Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . 6-18
8-1. Reference Designations, Abbreviations and Multipliers (1 of 5) . . . . . . 8-7
8-1. Reference Designations, Abbreviations and Multipliers (2 of 5) . . . . . . 8-8
8-1. Reference Designations, Abbreviations, and Multipliers (3 of 5) . . . . . . 8-9
8-1. Reference Designations, Abbreviations, and Multipliers (4 of 5) . . . . . . 8-10
8-1. Reference Designations, Abbreviations, and Multipliers (5 of 5) . . . . . . 8-11
Contents-8
1
Getting Started
This chapter provides information to help get you started so that your HP 70902A IF section
is serviced properly.
This chapter answers the questions \What is servicing?" and \When is servicing needed?". It
then describes the procedures used to return your HP 70902A IF section to Hewlett-Packard
for servicing if you choose not to perform the servicing yourself.
Getting Started 1-1
What is servicing?
Servicing includes:
adjusting
troubleshooting
repairing
testing
All areas of servicing are explained in this service guide. This service guide is used to:
describe all adjustment procedures
illustrate module-level block diagrams and interconnect diagrams
illustrate the procedures for removal and replacement of major assemblies
explain module veri cation testing
In this service guide, when we refer to testing, we are referring to module veri cation tests.
Module veri cation tests should not be confused with veri cation of operation tests or
performance tests.
Module Module veri cation tests are used, during service, to test modules so
Veri cation Tests that when assembled into a system, the system meets the system's
speci cations.
Veri cation of Veri cation of operation tests are used to verify the proper operation of an
Operation Tests instrument and to verify that the instrument meets approximately 80% of
its measurement related speci cations.
For information related to veri cation of operation tests, refer to the
HP 70000 Modular Spectrum Analyzer Installation and Veri cation
Manual .
Performance Tests Performance tests are used to verify the proper operation of a complete
modular measurement system (MMS) to full system speci cations.
For information related to performance tests, refer to the documentation
for the HP 11990A performance test software.
When is servicing needed?
Servicing is needed:
if error messages are displayed on your HP 70000 Series display
to perform repairs or adjustments or both
to verify the correct operation of your HP 70902A IF section
or, if applicable, when upgrading rmware
If you determine that your HP 70902A IF section needs servicing, you can perform the
servicing yourself or, you can return your HP 70902A IF section to a Hewlett-Packard service
center.
1-2 Getting Started
If you want Hewlett-Packard to service your HP 70902A IF section
Before calling Hewlett-Packard or returning your HP 70902A IF section for service, please
read your warranty information. Warranty information is printed at the front of this service
guide.
In any correspondence or telephone conversations, refer to the HP 70902A IF section by
its full model number and full serial number. With this information, the Hewlett-Packard
representative can determine whether your unit is still within its warranty period.
Determining your HP 70902A IF section's serial number
When a module is manufactured by Hewlett-Packard, it is given a unique serial number. This
serial number is attached to a label on the front frame or front panel of the module. A serial
number label is in two parts. (Refer to Figure 1-1.) The rst part makes up the serial number
pre x and consists of four digits and a letter. The second part makes up the serial number
sux and consists of the last ve digits on the serial number label. The serial number pre x is
the same for all identical modules; it only changes when a change in the electrical or physical
functionality is made. The serial number sux, however, changes sequentially and is dierent
for each module.
Figure 1-1. Typical Serial Number Label
Getting Started 1-3
Returning your HP 70902A IF section for service
Hewlett-Packard has sales and service oces around the world to provide complete support
for your HP 70902A IF section. To obtain servicing information or to order replacement parts,
contact the nearest Hewlett-Packard sales and service oce listed in Table 1-2.
Use the following procedure to return your HP 70902A IF section to Hewlett-Packard for
service:
1. Fill out a service tag (available at the end of this service guide) and attach it to the
instrument. Please be as speci c as possible about the nature of the problem. Send a copy
of any or all of the following information:
any error messages that appeared on the HP 70000 Series display
a completed Performance Test Record
any other speci c data on the performance of the HP 70902A IF section
Caution Damage can result if the original packaging materials are not used. Packaging
materials should be anti-static and should cushion the HP 70902A IF section
on all sides.
Never use styrene pellets in any shape as packaging materials. They do not
adequately cushion the instrument or prevent it from moving in the shipping
container. Styrene pellets can also cause equipment damage by generating
static electricity or by lodging in fan motors.
2. Place the HP 70902A IF section in its original packaging materials (see Table 1-1).
If the original packaging materials are not available, you can contact a Hewlett-Packard
sales and service oce to obtain information on packaging materials or you may use an
alternative packing material referred to as \bubble-pack". One of the companies that
makes bubble-pack is Sealed Air Corporation of Commerce, California, 90001.
3. Surround the HP 70902A IF section with at least 3 to 4 inches of its original packing
material or bubble-pack to prevent the HP 70902A IF section from moving in its shipping
container.
4. Place the HP 70902A IF section, after wrapping it with packing material, in its original
shipping container or a strong shipping container that is made of double-walled corrugated
cardboard with 159 kg (350 lb) bursting strength.
The shipping container must be both large enough and strong enough to accommodate an
HP 70902A IF section and allow at least 3 to 4 inches on all sides for packing material.
5. Seal the shipping container securely with strong nylon adhesive tape.
6. Mark the shipping container \FRAGILE, HANDLE WITH CARE" to help ensure careful
handling.
7. Retain copies of all shipping papers.
1-4 Getting Started
Table 1-1. Packaging and Contents
Item Description HP Part Number Qty
1 Carton-outer 9211-5118 1
2 Carton-inner 9211-5119 1
3 Carton-sliders 5180-2369 2
4 Foam inserts 4208-0493 2
5 Foam pads 5180-2370 2
Getting Started 1-5
Table 1-2. Hewlett-Packard Sales and Service Offices
US FIELD OPERATIONS EUROPEAN OPERATIONS INTERCON OPERATIONS
HEADQUARTERS HEADQUARTERS HEADQUARTERS
Hewlett-Packard Company Hewlett-Packard S.A. Hewlett-Packard Company
19320 Pruneridge Avenue 150, Route du Nant-d'Avril 3495 Deer Creek Rd.
Cupertino, CA 95014, USA 1217 Meyrin 2/Geneva Palo Alto, California 94304-1316
(800) 752-0900 Switzerland (415) 857-5027
(41 22) 780.8111
California Australia
Hewlett-Packard Co. France Hewlett-Packard Australia Ltd.
1421 South Manhattan Ave. Hewlett-Packard France 31-41 Joseph Street
Fullerton, CA 92631 1 Avenue Du Canada Blackburn, Victoria 3130
(714) 999-6700 Zone D'Activite De Courtaboeuf (61 3) 895-2895
F-91947 Les Ulis Cedex
Hewlett-Packard Co. France Canada
301 E. Evelyn (33 1) 69 82 60 60 Hewlett-Packard (Canada) Ltd.
Mountain View, CA 94041 17500 South Service Road
(415) 694-2000 Germany Trans-Canada Highway
Hewlett-Packard GmbH Kirkland, Quebec H9J 2X8
Colorado Berner Strasse 117 Canada
Hewlett-Packard Co. 6000 Frankfurt 56 (514) 697-4232
24 Inverness Place, East West Germany
Englewood, CO 80112 (49 69) 500006-0
(303) 649-5000 Japan
Great Britain Yokogawa-Hewlett-Packard Ltd.
Georgia Hewlett-Packard Ltd. 1-27-15 Yabe, Sagamihara
Hewlett-Packard Co. Eskdale Road, Winnersh Triangle Kanagawa 229, Japan
2000 South Park Place Wokingham, Berkshire RG11 5DZ (81 427) 59-1311
Atlanta, GA 30339 England
(404) 955-1500 (44 734) 696622
China
Illinois China Hewlett-Packard, Co.
Hewlett-Packard Co. 38 Bei San Huan X1 Road
5201 Tollview Drive Shuang Yu Shu
Rolling Meadows, IL 60008 Hai Dian District
(708) 255-9800 Beijing, China
(86 1) 256-6888
New Jersey
Hewlett-Packard Co. Singapore
120 W. Century Road Hewlett-Packard Singapore
Paramus, NJ 07653 Pte. Ltd.
(201) 599-5000 1150 Depot Road
Singapore 0410
Texas (65) 273 7388
Hewlett-Packard Co.
930 E. Campbell Rd. Taiwan
Richardson, TX 75081 Hewlett-Packard Taiwan
(214) 231-6101 8th Floor, H-P Building
337 Fu Hsing North Road
Taipei, Taiwan
(886 2) 712-0404
1-6 Getting Started
2
Recommended Test Equipment
This chapter contains a list of recommended test equipment, a listing of a general service
kit for HP 70000 modular measurement system modules, and information on electrostatic
discharge (ESD).
The following tables list the recommended models of equipment that may be used. If a piece
of equipment has any critical speci cations, they are de ned under the list of recommended
models for that equipment. The following tables also list any specialized test equipment
needed during the tests and adjustments; for more information, refer to Chapter 4 and
Chapter 5.
Table 2-1. Recommended Test Equipment
Equipment Recommended Model Verif. Adj.
Test Proc.
HP 70000 system components:
Display HP 70205A graphics display p
or HP 70206A system graphics display p
or HP 70004A color display p
Mainframe HP 70001A mainframe, modi ed1 p p
Local oscillator source HP 70900A local oscillator source p p
or HP 70900B local oscillator source p p
IF section HP 70903A IF section p
RF section HP 70904A RF section p
or HP 70905A RF section p
or HP 70906A RF section p
or HP 70908A RF section p
or HP 70909A RF section p
or HP 70910A RF section p
Specialized test equipment:
21.4 MHz Notch Filter HP 70902A Option K01 IF section2
p
1 Mainframe must be modi ed. Refer to \Service Kit".
2 Refer to Chapter 4 for more details on building this specialized test equipment.
Recommended Test Equipment 2-1
Table 2-1. Recommended Test Equipment (2 of 4)
Equipment Recommended Model Verif. Adj.
Test Proc.
Attenuator/Switch driver HP 11713A attenuator/switch driver1 p p
Controller HP 9000 Series 200/300 controller2 p p
Series 200 and 300
Frequency counter HP 5316B universal counter p p
Critical Speci cations:
Frequency range: 3 to 25 MHz
Resolution: 1 Hz
This equipment must have
adjustable gate time to 2 seconds.
Interface card HP 98624A HP-IB interface
Level generator HP 3335A synthesizer/level generator p p
Critical Speci cations:
Frequency:
Range: 3 to 25 MHz
Resolution: 0.001 Hz
Amplitude:
Range: +10 to 086 dBm
Resolution: 0.01 dB
Accuracy: 60.09 dB
Spurious: < 075 dBc
Network analyzer HP 8757C scalar network analyzer p
or HP 8757A scalar network analyzer p
or HP 8756A scalar network analyzer p
1 For use with a programmable step attenuator. It must be HP-IB programmable and compatible with the step
attenuator.
2 See also Interface card.
2-2 Recommended Test Equipment
Table 2-1. Recommended Test Equipment (3 of 4)
Equipment Recommended Model Verif. Adj.
Test Proc.
Power meter HP 8902A measuring receiver p p
Critical Speci cations:
Range: +10 to 020 dBm
Accuracy: 60.02 dB
60.02 dB/range change
Power sensor HP 11722A sensor module p p
Critical Speci cations:
Range: +10 to 020 dBm
Accuracy: +2% to 04%
Input SWR: < 1.15
Precision DVM HP 3456A digital multimeter p p
Receiver HP 8902A measuring receiver p p
RF source HP 8340A synthesized sweeper1 p
or HP 8340B synthesized sweeper1
p
or HP 83640A synthesized sweeper1 p
Critical Speci cations:
Frequency: 21.4 MHz 65 MHz
Amplitude: +10 to 021 dBm
RF ampli er HP 8447A RF ampli er p
Critical Speci cations:
Gain: 20 61 dB
Noise Figure: < 8 dB
1 This equipment must work with an HP 8757C scalar network analyzer.
Recommended Test Equipment 2-3
Table 2-1. Recommended Test Equipment (4 of 4)
Equipment Recommended Model Verif. Adj.
Test Proc.
Spectrum analyzer HP 71200A modular spectrum analyzer p
or HP 8566B spectrum analyzer p
(upgraded with rmware
version 16.7.85 or later)
Critical Speci cations:
Frequency:
Range: 100 Hz to 25 MHz
Resolution: 1 Hz
Amplitude:
Range: 0 to 025 dBm
Resolution: 0.01 dB
Log Fidelity: 0.1 dB
Synthesized source HP 8662A synthesized signal generator p p
or HP 8663A synthesized signal generator p p
Critical Speci cations:
Frequency:
Range: 18.3 to 25 MHz
Resolution: 1 Hz
Amplitude:
+10 to 020 dBm
Resolution: 0.1 dB
Spurious: <075 dBc
2-4 Recommended Test Equipment
Table 2-2. Recommended Test Accessories
Accessories Recommended Model Verif. Adj.
Test Proc.
Adjustment tool HP 8710-1781 alignment tool p
HP 8710-1010 alignment tool p
Detector HP 11664A detector p
HP 11664E detector p
Critical Speci cations:
Frequency: 21.4 MHz 65 MHz
AC detection mode must work with
an HP 8757C scalar network analyzer
Directional bridge HP 8721A directional bridge p
Critical Speci cations:
Nominal impedance: 50
Frequency range: 21.4 62 MHz
Directivity: > 40 dB
Transmission/coupling loss: 6 dB (nominal)
Feedthrough terminator HP 10100C 50
BNC feedthrough p
Critical Speci cations:
Nominal impedance: 50
Power splitter HP 11667A power splitter p p
or HP 11667B power splitter p p
Critical Speci cations:
Nominal impedance: 50
Tracking: 0.15 dB
Probe (resistive divider) HP 10020A resistive divider probe kit p
Critical Speci cations:
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo