Service Manuals, User Guides, Schematic Diagrams or docs for : DE`LONGHI disassembly MX270

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disassembly MX270 documenatation <<

Text preview - extract from the document

Spares - MX270 Disassembly & re-assembly instructions                                                       Page 1 of 8



MX270
The following procedures are aimed to help with dismantling and service repairs.

Always disconnect the appliance from mains supply prior to removal of the covers and suitably protect the finish on the
casings.

Click on the pictures to open a larger version in a seperate window.




The vent cover is secured internally by
3 screws.




To remove the planet hub:



Align the hub as shown.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm                                           30/04/2009
Spares - MX270 Disassembly & re-assembly instructions                                    Page 2 of 8




 Remove the hex screw, and lift the
 hub straight off.




 Internal view of hub assembly.




To access the power unit:
*it will be necessary to remove the pedestal assembly to gain access to the power unit



 Turn machine upside down.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm                        30/04/2009
Spares - MX270 Disassembly & re-assembly instructions               Page 3 of 8




Remove the 2 screws highlighted by
the arrows.




Lift off the pedestal assembly.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm   30/04/2009
Spares - MX270 Disassembly & re-assembly instructions               Page 4 of 8




Remove the locating pin, then use a
small flat screwdriver to dislocate the
lugs of the headlift latch.




Please note the correct position of the
spring prior to removal. Then remove
the 3 screws at the rear of the power
unit.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm   30/04/2009
Spares - MX270 Disassembly & re-assembly instructions               Page 5 of 8




Remove the four screw caps and
screws beneath.

*it is not necessary to remove the hub
at this stage




Turn the power unit upright and lift off
the top cover.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm   30/04/2009
Spares - MX270 Disassembly & re-assembly instructions               Page 6 of 8




Speed control PCB wiring.




Please note the correct position of the
3 tie wraps.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm   30/04/2009
Spares - MX270 Disassembly & re-assembly instructions               Page 7 of 8




Main PCB wiring.




Speed control      switch   and   lever
assembly.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm   30/04/2009
Spares - MX270 Disassembly & re-assembly instructions               Page 8 of 8




Click here to return to the top of the page.

Back.




http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm   30/04/2009

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo