Service Manuals, User Guides, Schematic Diagrams or docs for : Dell Laptop REMOVE_2
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download REMOVE_2 documenatation <<Text preview - extract from the documentDellTM InspironTM 8000:
Removing and
R e p l a c i n g Pa r t s
Preparing to Work Inside the
Computer
NOTICE: Only a certified service technician should perform repairs on your
computer. Damage or inoperability due to servicing not authorized by Dell is
not covered by your warranty.
NOTICE: Unless otherwise noted, each procedure in this manual assumes that
a part can be replaced by performing the removal procedure in reverse order.
NOTICE: To avoid damaging the computer, perform the following steps before
you begin working inside the computer.
1 Make sure that the work surface is clean to prevent scratching the
computer cover.
2 Save and close any open files, and exit any open programs.
3 Turn off the computer and all attached devices. HINT: Make sure the
computer is turned off and
4 Make sure the computer is undocked. not in standby or
5 Disconnect the computer from the electrical outlet. hibernate mode. If you
cannot shut down the
6 To avoid possible damage to the system board, wait 10 to 20 seconds computer using the
and then disconnect any attached devices. computer's operating
system, press and hold the
7 Disconnect all other external cables from the computer. power button for 4
8 Remove any installed PC Cards or plastic blanks from the PC Card seconds.
slot.
9 Close the display and turn the computer upside down on a flat work
surface.
10 Remove the primary battery from the battery bay and the secondary
battery from the media bay, if a secondary battery is in use.
NOTICE: To avoid damaging the system board, you must remove the main
battery and secondary battery (if present) before you service the computer.
D e l l TM Ins pi r o nTM 80 00 : Re mo v i ng a nd Rep l a ci n g Par ts 73
11 Remove any installed device in the media bay.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
12 To dissipate any static electricity while you work, periodically touch an
unpainted metal surface on the surface of the computer, such as the
I/O panel on the back of the computer chassis.
13 Handle components and cards with care. Do not touch the
components or contacts on a card. Hold a card by it edges or by its
metal mounting bracket. Hold a component such as a microprocessor
by its edges, not by its pins.
Recommended Tools
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo