Service Manuals, User Guides, Schematic Diagrams or docs for : Dell latitude x200

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download latitude x200 documenatation <<

Text preview - extract from the document

 Dell Latitude X200 Service Manual



DellTM LatitudeTM X200 Service Manual
Before You Begin
   Preparing to Work Inside the Computer
   Recommended Tools
   Computer Orientation
   Screw Identification
System Components
Battery
Memory Module and Mini PCI Card
   Memory Module
   Mini PCI Card
Keyboard
Palm Rest
Hard Drive
Hinge Covers and Display Assembly
   Hinge Covers
   Display Assembly
Keyboard Tray
Reserve Battery
Speakers
Cooling Fan
System Board
Modem Daughter Card
Battery Latches
Flashing the BIOS
Pin Assignments for I/O Connectors
   Pin Assignments for the Computer
   Pin Assignments for the Media Base




Notes, Notices, and Cautions


 file:///F|/Service%20Manuals/Dell/Latitude/x200/index.htm (1 of 2) [2/28/2004 8:23:48 AM]
 Dell Latitude X200 Service Manual


       NOTE: A NOTE indicates important information that helps you make better use
       of your computer.

        NOTICE: A NOTICE indicates either potential damage to hardware or loss of
        data and tells you how to avoid the problem.

        CAUTION: A CAUTION indicates a potential for property damage,
        personal injury, or death.




Trademarks used in this text: Dell, the DELL logo, AccessDirect, and Latitude are trademarks of Dell
Computer Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary
interest in trademarks and trade names other than its own.

April 2002 Rev. A00




 file:///F|/Service%20Manuals/Dell/Latitude/x200/index.htm (2 of 2) [2/28/2004 8:23:48 AM]
 Before You Begin: Dell Latitude X200 Service Manual

Back to Contents Page


Before You Begin
DellTM LatitudeTM X200 Service Manual

    Preparing to Work Inside the Computer
    Recommended Tools
    Computer Orientation
    Screw Identification




Preparing to Work Inside the Computer
        CAUTION: Before working inside your computer, read "Safety and EMC
        Instructions: Portable Computers" in your System Information Guide.

        NOTICE: Only a certified service technician should perform repairs on your
        computer. Damage due to servicing that is not authorized by Dell is not covered
        by your warranty.

        NOTICE: To avoid damaging the computer, perform the following steps before
        you begin working inside the computer.


   1. Ensure that the work surface is flat and clean to prevent scratching the
      computer cover.

   2. Save any work in progress and exit all open programs.

   3. Turn off the computer and all attached devices.



       NOTE: Ensure that the computer is turned off and not in suspend or hibernate
       mode. If you cannot shut down the computer using the computer operating
       system, press and hold the power button for 4 seconds.


   4. Ensure that the computer is undocked.



 file:///F|/Service%20Manuals/Dell/Latitude/x200/begin.htm (1 of 6) [2/28/2004 8:23:54 AM]
 Before You Begin: Dell Latitude X200 Service Manual

   5. Disconnect the computer from the electrical outlet.

   6. To avoid possible damage to the system board, wait 10 to 20 seconds and then
      disconnect any attached devices.

   7. Disconnect all other external cables from the computer.

   8. Remove any installed PC Cards or plastic blanks from the PC Card slot.

   9. Close the display and turn the computer upside down on a flat work surface.



        NOTICE: To avoid damaging the system board, you must remove the battery
        before you service the computer.


 10. Remove the battery from the battery bay.

 11. To dissipate any static electricity while you work, use a wrist grounding strap or
     periodically touch an unpainted metal surface.

 12. Handle components and cards with care. Do not touch the components or
     contacts on a card. Hold a card by it edges or by its metal mounting bracket.
     Hold a component such as a microprocessor by its edges, not by its pins.




Recommended Tools
The procedures in this manual require the following tools:

    q    #1 magnetized Phillips screwdriver

    q    

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo