Service Manuals, User Guides, Schematic Diagrams or docs for : Gateway M500 M505 REMOVE REPLACE KEYBOARD
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download M500 M505 REMOVE REPLACE KEYBOARD documenatation <<
Text preview - extract from the document
Replacing the Gateway M505 Keyboard
This package includes a replacement keyboard for your Gateway M505
notebook and these printed instructions.
Tools you need
You need a small Phillips and a small flat-blade screwdriver.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as electrostatic discharge (ESD).
Warning ESD can permanently damage electrostatic
discharge-sensitive components in your notebook. Prevent
ESD damage by following ESD guidelines every time you
replace the keyboard.
Warning To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook and unplug the power
cord and modem and network cables before replacing the
keyboard.
Before replacing the keyboard, follow these guidelines:
Turn off your notebook.
Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
Warning To prevent risk of electric shock, do not insert any object
into the vent holes of the notebook.
Touch a bare metal surface on your workbench or other grounded object.
Unplug the power cord and the modem and network cables.
Remove the battery. For more information, see "Changing batteries" in
your user guide.
Disconnect all peripheral devices and remove any PC Cards.
www.gateway.com 1
Before working with notebook components, follow these guidelines:
Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
To remove the keyboard:
1 Follow the instructions under "Preventing static electricity discharge" on
page 1.
2 Turn off your notebook, then unplug the AC adapter, modem and network
cables.
3 Turn your notebook over so the bottom is facing up, then remove the
battery.
4 Remove the two screws securing the keyboard and the keyboard cover.
Screws
2 www.gateway.com
5 Turn your notebook over so the top is facing up, then remove the hinge
screws.
Screws
6 Open the LCD panel to the fully open position. Be careful not to use too
much force when opening the LCD panel.
7 Insert the small flat-blade screwdriver under the edge of the hinge and
gently pry up the keyboard cover.
Important Inserting a piece of cloth between the screwdriver and
keyboard and notebook case will help prevent damage to
your notebook.
www.gateway.com 3
8 Pull the cover off your notebook. You will hear small snapping sounds as
the cover comes away from your notebook. Be careful not to break off the
tabs found on the front of the cover.
9 Lift the back edge of the keyboard, then slowly rotate it toward you so it
lies keys-down on top of your notebook. Be careful not to damage the
LCD panel.
4 www.gateway.com
10 Carefully insert the small flat-blade screwdriver between the keyboard
cable and the black plastic hinge where the cable connects to the system
board. Gently lift the hinge off the cable. The cable is now free and you
can remove the keyboard.
To install the keyboard:
1 Place the new keyboard keys-down on your notebook with the space bar
away from you.
2 Verify the black plastic hinge on the system board keyboard connector is
in the raised position.
3 Insert the end of the keyboard cable between the black plastic hinge and
the white connector.
Important The plug is correctly oriented if the cable is not twisted.
4 Press the black plastic hinge onto the keyboard cable.
5 Rotate the keyboard toward the LCD panel until the keyboard is
almost face-up.
www.gateway.com 5
6 Insert the tabs on the front of the keyboard under the palm rest.
Tabs
7 Gently press the keyboard down until it is flat. The keyboard should easily
fall into place. Be careful not to damage the LCD panel.
8 Slide the front keyboard cover tabs under your notebook frame and align
the hinges. Press down on the cover in several places until it clicks in place.
Warning If the cover is not correctly replaced, your notebook could
be damaged when you try to close the LCD panel.
9 Close the LCD panel and turn your notebook so the back is facing you.
10 Install the hinge screws.
6 www.gateway.com
Screws
11 Turn your notebook over so the bottom is facing up, then install the two
screws securing the keyboard and the keyboard cover.
Screws
12 Replace the battery, connect the power adapter and modem and network
cables, then turn on your notebook.
www.gateway.com 7
See your user's guide for important technical support, safety, regulatory, and
legal information.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo