Service Manuals, User Guides, Schematic Diagrams or docs for : HP 9000_hpux 8.x B1862-90002_Installing_and_Updating_HP-UX_8.0_300_400_Jan91
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download B1862-90002_Installing_and_Updating_HP-UX_8.0_300_400_Jan91 documenatation <<
Text preview - extract from the document
Installing and Updating HP-UX
HP 9000 Series 300/400
Fli;- HEWLETT
a:~ PACKARD
HP Part No. B1862-90002
Printed in USA January 1991
E0191
Legal Notices
The information in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose. Hewlett-Packard shall not be held liable for
errors contained herein or direct, indirect, special, incidental or consequential
damages in connection with the furnishing, performance, or use of this
material.
Warranty. A copy of the specific warranty terms applicable to your
Hewlett-Packard product and replacement parts can be obtained from your
local Sales and Service Office.
@copyright 1983-91 Hewlett-Packard Company
This document contains information which is protected by copyright. All rights
are reserved. Reproduction, adaptation, or translation without prior written
permission is prohibited, except as allowed under the copyright laws.
Restricted Rights Legend. Use, duplication, or disclosure by the U.S.
Government Department of Defense is subject to restrictions as set forth in
paragraph (b )(3)(ii) of the Rights in Technical Data and Software clause in
FAR 52.227-7013.
Use of this manual and flexible disk( s) or tape cartridge( s) supplied for this
pack is restricted to this product only. Additional copies of the programs may
be made for security and back-up purposes only. Resale of the programs in
their present form or with alterations, is expressly prohibited.
@copyright 1980,84, 86 AT&T Technologies, Inc.
UNIX and System V are registered trademarks of AT&T in the USA and other
countries.
@copyright 1979,80, 83,85-90 Regents of the University of California
This software is based in part on the Fourth Berkeley Software Distribution
under license from the Regents of the University of California.
Printing History
The manual printing date and part number indicate its current edition. The
printing date will change when a new edition is printed. Minor changes may be
made at reprint without changing the printing date. The manual part number
will change when extensive changes are made.
Manual updates may be issued between editions to correct errors or document
product changes. To ensure that you receive the updated or new editions, you
should subscribe to the appropriate product support service. See your HP sales
representative for details.
January 1991 ... Edition 1.
iv
Contents
1. Where to Begin
2. Concepts
Overview . . . . . . . . . . . 2-1
HP-UX During Normal Operation. 2-2
Booting From Disk 2-3
Installing HP -UX . . . 2-4
Updating HP -UX . . . 2-6
The Update Program 2-7
Modifying HP -UX 2-8
3. Planning What Software to Load on Your System
Selectively Loading Software . . . . . . . . . . 3-1
Partition and Fileset Descriptions . . . . . . . 3-2
Installing NetLS (Network License System) Filesets 3-21
For More Information . . . . . . . . . . . . . 3-22
4. Installing HP-UX
Before You Install ... 4-1
Overview of Installing . . . . . 4-3
Step 1: Getting Your System Ready 4-4
Step 2: Inserting the Release 8.0 HP- UX Install Media 4-5
Step 3: Loading the Installation Software 4-6
Step 4: Interpreting the Welcome Screen 4-9
Tips on Using Menus . . . . . . 4-9
Step 5: Select the Destination Device 4-10
Selecting the Destination. . . . . 4-10
The Destination Disk Is Not Listed 4-11
Installing onto a Used Disk. . . . 4-12
Step 6: Continue the Program or Alter Parameters 4-13
Contents-1
CONTINUE installation process .. . 4-13
Change DESTINATION device .. . 4-14
Change FILESYSTEM parameters .. . 4-14
Step 7: Verifying Swap Space . . . . . 4-15
Step 8: Verifying the Destination Device 4-17
Step 9: Initializing the Destination Disk 4-18
If You Have a SCSI Disk. . . . . . . 4-18
If You Have a Non-SCSI Disk ... 4-18
Step 10: Loading Partitions Containing Filesets . 4-20
Step 11: Congratulations! You Installed HP- UX 4-27
After Installing HP -UX . . . . . . . 4-27
Removing Unwanted Software Using rmfn 4-29
Important Points 4-29
How to Use rmfn . . . . . . . . . . 4-30
5. Updating HP-UX
New Features in 8.0 Update 5-3
Interactive Update 5-4
Non-interactive Update 5-4
If Problems Occur During an Interactive Update ... 5-5
If Problems Occur During a Non-interactive Update ... 5-5
Before Running Update . . . . . 5-6
Before All Updates . . . . . . . 5-6
See associated documentation. 5-6
If you're using an NFS Server ... 5-6
Clean up files on root disk. . . . 5-6
Check that your system has adequate disk space. 5-8
Make sure you can recover your system. . . . 5-8
If You are Updating from Tape... . . . . . 5-9
If You Are Updating from a Network Server .. . 5-9
If you are updating from CD-ROM .. . 5-9
If You are Updating a Cluster... ... . 5-10
Check file systems to be mounted . . . . . 5-10
If you are updating the operating system ... 5-11
If updating from CD-ROM, mount the CD-ROM drive. 5-12
Establish adequate swap space for the update process. 5-12
More Tips on Updating 5-13
Where to Go Next ... 5-13
Contents-2
Running the Update Program 5-14
Procedure . . . . . . . . 5-14
If You Need to Free Up Disk Space 5-30
Dealing with Minimum Free Space Requirements 5-30
Dealing with Insufficient Disk Space . . . . . . 5-31
How to Free Disk Space . . . . . . . . . . . 5-31
De-select Filesets or Remove Files Interactively 5-31
Mount Another File System 5-32
Create Symbolic Links . . . . 5-32
Getting More Information . . . 5-33
Tasks to Perform after the Update 5-34
Checking the update.log File 5-36
A Guide to Troubleshooting . . . 5-38
6. Setting Up a Network Server to Update HP-UX
Overview of the netdist Program . . . . . . . 6-1
Before Setting Up a Network Distribution Server 6-2
Hardware Requirements . . . . . . . 6-2
Software Requirements . . . . . . . . . . 6-3
Setting Up a Network Distribution Server 6-4
Shutting Down the Network Distribution Server 6-7
Procedure . . . . . . . . . . . . . . . . 6-7
Adding and Updating Filesets on the Network Distribution Server 6-8
Prerequisite . . . . . . . . . . . . . 6-8
Adding New Filesets to an Existing Server 6-8
Updating Existing Filesets on the Server . 6-8
Checking the netdist.log File . . . . . . . 6-9
Finding Out What Filesets Are Available to Network Update. 6-11
Checking the MAIN.pkg File . . . . . . . . . . . . . . 6-11
Checking Dependencies between Filesets . . . . . . . . . 6-11
Modifying What Filesets are Available to Requesting Systems 6-12
Contents-3
A. Product to Fileset Mapping
Product/Fileset Lists . . . . . . . . . . . . . . . . . . A-l
HP-UX 02-User Runtime 8300/400 HP-UX 32-User Runtime
8300/400 . . . . . . . . . . . . . A-2
HP-UX/X.258300/400 . . . . . . . . A-5
AN8I/C Compiler 8300/400 . . . . . . A-6
C/AN81 C Developer's Bundle 8300/400 . A-7
Developer's Toolkit 8300/400 . A-8
Fortran 8300/400 . . . . . A-9
Pascal 8300/400 . . . . . A-9
HP GK8 8300/400 . . . . A-9
Japanese NL I/O 8300/400 . A-lO
8implified Chinese NL I/O 8300/400 A-lO
Traditional Chinese NL I/O 8300/400 A-ll
Korean NL I/O 8300/400 . . . . . A-ll
HP Windows/9000 8300/400 . . . . A-l2
Network 8ervices 8300/400. . . . . A-l2
Terminal 8ession Manager 8300/400 . A-l3
General Programming Tools 8300/400 A-l3
Index
Contents-4
Figures
2-1. The HP-UX Kernel Isolates the User From the Hardware 2-2
2-2. Booting From Disk: The Kernel Is Loaded into Memory From
the System Disk . . . . . . . . . . . . . . . . . . 2-3
2-3. Installing HP-UX: Copying Files From Tape or CD-ROM to
the System Disk . . . . . . . . . . . . . . . . . . 2-4
2-4. Updating HP-UX: Copying Newest Version of Files From Tape
or CD-ROM to the System Disk 2-6
4-1. rmfn: "Delete Partitions" Screen .". . . . . . . . . . . . 4-30
Tables
1-1. Where to Begin . . . . . . . . . . . . . . . 1-1
3-1. DIAGNOSTICS Partition - Fileset Descriptions. 3-3
3-2. GRAPHICS Partition - Fileset Descriptions 3-4
3-3. NATIVE LANGUAGE SUPPORT Partition - Fileset
Descriptions . . . . . . . . . . . . . . . . 3-5
3-4. NETWORKING Partition - Fileset Descriptions 3-7
3-5. NL (NATIVE LANGUAGE) I/O Partition - Fileset
Descriptions . . . . . . . . . . . . . 3-9
3-6. OS-ADMIN Partition - Fileset Descriptions 3-10
3-7. OS-CORE Partition - Fileset Descriptions . 3-11
3-8. OS-FEATURES Partition - Fileset Descriptions. 3-12
3-9. PROG-LANGUAGES Partition - Fileset Descriptions 3-14
3-10. REFERENCE-DOC Partition - Fileset Description 3-15
3-11. SHARED-LIBS Partition - Fileset Descriptions 3-18
3-12. WINDOWS Partition - Fileset Descriptions 3-19
Contents-5
1
1
Where to Begin
This manual explains how to install and update on Hewlett-Packard Series
300/400 computer systems. Table 1-1 gets you started.
Table 1◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo