Service Manuals, User Guides, Schematic Diagrams or docs for : JBL Audio DVD 280 hfe_jbl_dvd_280_service_en

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
hfe_jbl_dvd_280_service_en


>> Download hfe_jbl_dvd_280_service_en documenatation <<

Text preview - extract from the document
                Model DVD                         280
             DVD/CD/CD-R/CD-RW/VCD MP3 Player
                                   Service Manual




                                                  - Contents -
SERVICE PRECAUTIONS.............................2              EXPLODED VIEW......................................17
SPECIFICATIONS........................................5        BLOCK DIAGRAM......................................18
FRONT PANEL CONTROLS..........................6                PCB DRAWINGS.......................................19
INFORMATION DISPLAY..............................7             ELECTRICAL PARTS LIST ..........................23
REMOTE CONTROL....................................8            MECHANICAL PARTS LIST ........................29
REAR PANEL CONNECTIONS.....................11                  SEMICONDUCTOR PINOUTS......................31
CONNECTIONS/SETUP................................12            SYSTEM CONFIGURATION SPECS.............38
TEST SCREEN..........................................15        SCHEMATICS...........................................39
BASIC TROUBLESHOOTING GUIDE.............16                     PACKAGE................................................53




                                                 JBL Consumer Products
                                                 250 Crossways Park Dr.
                                               Woodbury, New York 11797                          Rev0 4/2005
                            SERVICING PRECAUTIONS
NOTES REGARDING HANDLING OF THE PICK-UP
1. Notes for transport and storage
  1) The pick-up should always be left in its conductive bag until immediately prior to use.
  2) The pick-up should never be subjected to external pressure or impact.


                                                                                   Drop impact
           Storage in conductive bag




2. Repair notes
  1) The pick-up incorporates a strong magnet, and so should never be brought close to magnetic materials.
  2) The pick-up should always be handled correctly and carefully, taking care to avoid external pressure and
     impact. If it is subjected to strong pressure or impact, the result may be an operational malfunction
     and/or damage to the printed-circuit board.
  3) Each and every pick-up is already individually adjusted to a high degree of precision, and for that reason
     the adjustment point and installation
     screws should absolutely never be touched.
  4) Laser beams may damage the eyes!
     Absolutely never permit laser beams to enter the eyes!
     Also NEVER switch ON the power to the laser output part (lens, etc.) of the pick-up if it is damaged.


                                                          NEVER look directly at the laser beam, and don't let contact
                                                          fingers or other exposed skin.




  5) Cleaning the lens surface
     If there is dust on the lens surface, the dust should be cleaned away by using an air bush (such as used
     for camera lens). The lens is held by a delicate spring. When cleaning the lens surface, therefore, a cot-
     ton swab should be used, taking care not to distort this.
                                                                                     Pressure
                   Magnet
                                                                                                       Pressure


                                       How to hold the pick-up



                                                                 Cotton swab




                                               Conductive Sheet

  6) Never attempt to disassemble the pick-up.
     Spring by excess pressure. If the lens is extremely dirty, apply isopropyl alcohol to the cotton swab. (Do
     not use any other liquid cleaners, because they will damage the lens.) Take care not to use too much of
     this alcohol on the swab, and do not allow the alcohol to get inside the pick-up.
                                                        2
DVD280


   NOTES REGARDING COMPACT DISC PLAYER REPAIRS
  1. Preparations

    1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These compo-
       nents are sensitive to, and easily affected by, static electricity. If such static electricity is high voltage,
       components can be damaged, and for that reason components should be handled with care.
    2) The pick-up is composed of many optical components and other high-precision components. Care must
       be taken, therefore, to avoid repair or storage where the temperature of humidity is high, where strong
       magnetism is present, or where there is excessive dust.

  2. Notes for repair

    1) Before replacing a component part, first disconnect the power supply lead wire from the unit
    2) All equipment, measuring instruments and tools must be grounded.
    3) The workbench should be covered with a conductive sheet and grounded.
       When removing the laser pick-up from its conductive bag, do not place the pick-up on the bag. (This is
       because there is the possibility of damage by static electricity.)
    4) To prevent AC leakage, the metal part of the soldering iron should be grounded.
    5) Workers should be grounded by an armband (1M)
    6) Care should be taken not to permit the laser pick-up to come in contact with clothing, in order to prevent
       static electricity changes in the clothing to escape from the armband.
    7) The laser beam from the pick-up should NEVER be directly facing the eyes or bare skin.




                                                                        Armband




                                                                               Resistor
                                                                               (1 Mohm)
                                             Resistor
                                             (1 Mohm)      Conductive
                                                           Sheet




                                                           3
DVD280


                                        ESD PRECAUTIONS
   Electrostatically Sensitive Devices (ESD)
   Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components com-
   monly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated cir-
   cuits and some field-effect transistors and semiconductor chip components. The following techniques should
   be used to help reduce the incidence of component damage caused by static electricity.
   1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off
      any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a
      commercially available discharging wrist strap device, which should be removed for potential shock reasons
      prior to applying power to the unit under test.
   2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive sur-
      face such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
   3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices.
   4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static"
      can generate electrical charges sufficient to damage ESD devices.
   5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD
      devices.
   6. Do not remove a replacement ESD device from its protective package until immediately before you are
      ready to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by
      conductive foam, aluminum foil or comparable conductive materials).
   7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the
      protective material to the chassis or circuit assembly into which the device will by installed.

   CAUTION : BE SURE NO POWER IS APPLIED TO THE CHASSIS OR CIRCUIT, AND OBSERVE ALL
             OTHER SAFETY PRECAUTIONS.

   8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion
      such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can gen-
      erate static electricity sufficient to damage an ESD device).




                                                          4
DVD280
  DVD280 TECHNICAL SPECIFICATIONS


  Applicable Disc:               Disc formats: 5-inch (12cm) or 3-inch (8cm) DVD-Video, standard
                                 conforming DVD-R, DVD+R, DVD-RW, DVD+RW, VCD, SVCD, CD, CD-R, MP3,
                                 WMA, JPEG or CD-RW discs
                                 Region code: DVD Movie disc with Code shown on rear panel of unit only
                                 DVD-Layers: Single Side/Single Layer, Single Side/Dual Layer, Dual Side/Dual Layer
                                 Audio formats: Linear PCM, MPEG, MLP/CPPM Dolby Digital or DTS Audio Discs
  Video Signal System:           PAL and NTSC
  Composite Video Output:        1V p-p/75 ohms, sync negative polarity
  S-Video Output:                Y/Luminance: 1V p-p/75 ohms, sync negative polarity
                                 C/Chrominance: 0.286V p-p
  Component Video Output:        Y: 1V p-p/75 ohms, sync negative polarity
                                 Pr: 0.7V p-p/75 ohms
                                 Pb: 0.7V p-p/75 ohms
  Analog Audio Output:           2V rms max
  Frequency Response:            DVD (Linear PCM):        2Hz 



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo