Service Manuals, User Guides, Schematic Diagrams or docs for : Keithley Cable PA-1044 (A - Dec 2011)(CA-558)

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
PA-1044 (A - Dec 2011)(CA-558)


>> Download PA-1044 (A - Dec 2011)(CA-558) documenatation <<

Text preview - extract from the document
                                                                                           Model CA-558
Keithley Instruments, Inc.                                              3-Pin Interlock Connector Cable
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
http://www.keithley.com



Description
The Model CA-558 is a 25-pin male D-sub to 3-pin female interlock cable assembly.

                                              Figure 1: Model CA-558




The Model CA-558 cable connects the safety interlock circuit of a Series 26xxA SourceMeter to the safety interlock
switch of the Model 8010 High Power Device Test Fixture that contains the device under test. To use the cable,
plug one end of the cable into the interlock connector on the test fixture, and connect the other end of the cable into
the INTERLOCK connector on the rear panel of the instrument.

You can order the cable in three different lengths (see table below).

Model number          Cable length
CA-558-1              3.28 ft (1.0 m)
CA-558-2              6.56 ft (2.0 m)
CA-558-3              9.84 ft (3.0 m)

This interlock cable can be used with the Models 2601A, 2602A, 2611A, 2612A, 2635A, 2636A, 2651A, and 2657A
SourceMeters.




PA-1044 Rev. A / December 2011                                                                                       1
Model CA-558


Electrical characteristics
    Working voltage: 32 V DC
Connector pin identification:

25-pin D-sub connector*                  3 pin connector
Pin 22: Red (+ 5 V) connected to         Pin 1
Pin 24: Green (interlock) connected to   Pin 2
Pin 20: Black (ground) connected to      Pin 3
* Pins 1-19, 21, 23, and 25 are not connected.




2                                                          PA-1044 Rev. A / December 2011



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo