Service Manuals, User Guides, Schematic Diagrams or docs for : Keithley Cable PA-1053 (A - Dec 2011)(CA-554)

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download PA-1053 (A - Dec 2011)(CA-554) documenatation <<

Text preview - extract from the document

                                                                                       Model CA-554
Keithley Instruments, Inc.                                                   High-Voltage Triax Cable
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
http://www.keithley.com



Description
The Model CA-554 is a high-voltage triax cable assembly that is terminated on either end with a male high-voltage
triax connector.

                                             Figure 1: Model CA-554-.5




You can order the cable in four different lengths (see table below).

Model            Cable length
number
CA-554-.5        1.64 ft (0.5 m)
CA-554-1         3.28 ft (1.0 m)
CA-554-2         6.56 ft (2.0 m)
CA-554-3         9.84 ft (3.0 m)

This cable assembly can be used with the Models 2657A High Power System SourceMeterInstrument, 8010
High Power Device Test Fixture, 2657A-PM-200 External Protection Model, and 2657A-LIM-3 LO Interconnect
Module.




PA-1053 Rev. A / December 2011                                                                                  1
Model CA-554


Electrical characteristics
    Rated voltage: 3300 V
    Rated amperage: 2.0 A
    Leakage current:
        Center to guard: < 100 x 10-12 A at 3000 V (see NOTE below)
        Guard to shield: < 100 x 10-9 A at 3000 V
    Full continuity:
        Center to center
        Guard to guard
        Shield to shield
    Dielectric breakdown voltage:
        Center/guard to shield: 5250 V




             With the Model 2657A System SourceMeterInstrument, the voltage between the Guard and HI
             (inner shield and center conductor) will typically be less than 1 V under steady-state conditions. This
             results in much lower leakage current between the cable's inner shield and center conductor.




2                                                                                  PA-1053 Rev. A / December 2011

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo