Service Manuals, User Guides, Schematic Diagrams or docs for : Keithley 2306 2306-910-01C
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 2306-910-01C documenatation <<
Text preview - extract from the document
Model 2306-VS Voltage Protection
Keithley Instruments, Inc. Condition with External Triggering
28775 Aurora Road
Cleveland, Ohio 44139 Release Note
(440) 248-0400
www.keithley.com
If only one channel is used for external triggering functionality, and if the sense and source lines are left
unconnected on the unused channel, Voltage Protection (VPT) condition may occur since a channel on the
Model 2306-VS with no load may drift high or low. If it drifts high, then a VPT condition will occur since VPT is
not dependent on output state (it is dependent on set voltage value and VPT settings). When using external
triggering functionality, a VPT condition on either channel will cause the channel using external triggering to
stop. This is done to allow the VPT condition to be detected in cases where the Model 2306-VS is constantly
being externally triggered for the desired functionality. To avoid a VPT condition, connect the sense and
source lines on the unused channel. See the TRIG[1]: EXT:STEP:VPT and the TRIG2:EXT:STEP:VPT com-
mands for guidance on disabling VPT checking on the channel being externally triggered only.
2306-910-01 Rev. C / 10-04
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo