Service Manuals, User Guides, Schematic Diagrams or docs for : LG Mobile Phone LG W7000 LG W7000 6

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download LG W7000 6 documenatation <<

Text preview - extract from the document

                           REVISED HISTORY

     DATE              ISSUE            CONTENTS OF CHANGES                     S/W VERSION
  APRIL/2002          ISSUE 1                  Initial Release


The information in this manual is subject to change without notice and should not be construed as
a commitment by LGE Inc. Furthermore, LGE Inc. reserves the right, without notice, to make
changes to equipment design as advances in engineering and manufacturing methods warrant.
This manual provides the information necessary to install, program, operate and maintain the
G7000/W7000.




                                              -1-
                                                                                  1. INTRODUCTION



1. INTRODUCTION

 1.1 Purpose
    This manual provides the information necessary to repair, calibration, description and download the
    features of the G7000/W7000.


 1.2 Regulatory Information

  A. Security
    Toll fraud, the unauthorized use of telecommunications system by an unauthorized part (for
    example, persons other than your company's employees, agents, subcontractors, or person
    working on your company's behalf) can result in substantial additional charges for your
    telecommunications services. System users are responsible for the security of own system.
    There are may be risks of toll fraud associated with your telecommunications system. System users
    are responsible for programming and configuring the equipment to prevent unauthorized use. LGE
    does not warrant that this product is immune from the above case but will prevent unauthorized use
    of common-carrier telecommunication service of facilities accessed through or connected to it. LGE
    will not be responsible for any charges that result from such unauthorized use.

  B. Incidence of Harm
    If a telephone company determines that the equipment provided to customer is faulty and possibly
    causing harm or interruption in service to the telephone network, it should disconnect telephone
    service until repair can be done. A telephone company may temporarily disconnect service as long
    as repair is not done.

  C. Changes in Service
    A local telephone company may make changes in its communications facilities or procedure. If
    these changes could reasonably be expected to affect the use of the G7000/W7000 or compatibility
    with the network, the telephone company is required to give advanced written notice to the user,
    allowing the user to take appropriate steps to maintain telephone service.

  D. Maintenance Limitations
    Maintenance limitations on the G7000/W7000 must be performed only by the LGE or its authorized
    agent. The user may not make any changes and/or repairs expect as specifically noted in this
    manual. Theref ore, note that unauthorized alternations or repair may affect the regulatory status of
    the system and may void any remaining warranty.

  E. Notice of Radiated Emissions
    The G7000/W7000 complies with rules regarding radiation and radio frequency emission as defined
    by local regulatory agencies. In accordance with these agencies, you may be required to provide
    information such as the following to the end user.




                                                -3-
1. INTRODUCTION



   F. Pictures
      The pictures in this manual are for illustrative purposes only; your actual hardware may look slightly
      different.

   G. Interference and Attenuation
      An G7000/W7000 may interfere with sensitive laboratory equipment, medical equipment, etc.
      Interference from unsuppressed engines or electric motors may cause problems.

   H. Electrostatic Sensitive Devices

                                              ATTENTION
      Boards, which contain Electrostatic Sensitive Device (ESD), are indicated by the       sign. Following
      information is ESD handling:


        Service personnel should ground themselves by using a wrist strap when exchange system
        boards.
        When repairs are made to a system board, they should spread the floor with anti-static mat
        which is also grounded.
        Use a suitable, grounded soldering iron.
        Keep sensitive parts in these protective packages until these are used.
        When returning system boards or parts like EEPROM to the factory, use the protective
        package as described.




                                                   -4-
                                                                          1. INTRODUCTION



1.3 Abbreviations
   For the purposes of this manual, following abbreviations apply:

       APC                  Automatic Power Control
       BB                   Baseband
       BER                  Bit Error Ratio
       CC-CV                Constant Current 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo