Service Manuals, User Guides, Schematic Diagrams or docs for : LG Monitor LG_60PS11_Block_Diagram_[SCH]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download LG_60PS11_Block_Diagram_[SCH] documenatation <<

Text preview - extract from the document

                                                                                                                                                                                 60PS11 (60H3 Panel) CIRCUIT INTERCONNECT DIAGRAM
                                                                                                                                                                                                     NOTE: Diode tests are conducted with the board disconnected.                                                                                                                                                                                                              Z-SUS Signal
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Connect Scope
                                                                        Y-DRIVE WAVEFORM                                                                          Step 1: RL On command turns on 5V (pins 9, 10, 12) and 12V (pins 5,6). Also 5V Det from SMPS when 5V turns on.                                                                                                                                                                                                                                                        between Waveform TP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          on Z board and Gnd
                                                                                                                                                                  Step 2: M5 On command Turns on M5V                                                                                                                                                                                                                                                                                                                                     Use RMS information
                                                             VR602                                  50VAC rms                                                     Step 3: Vs On command Turns on Va first then VS. Also, 17V turns on with Vs On command                                                                                                                                                                                                  0V                                                                            just to check for board
                                                             Set-up                                   "White"                                                                                                                                                                                                                                                     To run the Z-SUS without the Y-SUS.                                                                                                                                           activity.
                                                                                A                 59~106VAC rms                                                                                                                                                                                                                                                   Jump Audio 17V from SMPS to pin 1 of P100.
                                                              20uSec                                 "Picture"                                                                                                                      SMPS                                                                                                                          SMPS must be running OK.
               4mS                                            

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo