Service Manuals, User Guides, Schematic Diagrams or docs for : LG Monitor SW44I(480) CS480_10

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download CS480_10 documenatation <<

Text preview - extract from the document

                                           DISASSEMBLY


1. TILT/SWIVEL REMOVAL                                    3. TOTAL CHASSIS ASSEMBLY REMOVAL
      Set the monitor faces bottom                             Disconnect P903 (Degaussing pin) and P701
      Pressing the latch , carefully remove the                (DY pin).
      Tilt/swivel by pulling it upward.                        Remove two screws        from the Main Bracket
                                                               to separate it from the Front Cabinet.




                                                                                                   Main Bracket




2. BACK COVER REMOVAL                                     4. CRT BOARD ASSEMBLY REMOVAL
     Remove four screws      from the Back Cover.              Remove four pins .
     Slide the Back Cover away from the Front                  Remove CRT earth connector
     Cabinet of the monitor.                                   Carefully separate the CRT Board Assembly
                                                               from the CRT neck.
                                                               Discharge the remaining static electricity by
                                                               shorting between the Anode Cap and the CRT
                                                               ground.
                                                               Disconnect the Anode Cap from the CRT.

                                                                                               CRT Assembly
                                                                  Anode Cap




                                                    -9-
5. BOTTOM BRACKET REMOVAL                  6. MAIN BOARD ASSEMBLY REMOVAL
     Remove three screws .                      Remove three screws .
     Remove the Bottom Bracket.                 Remove the screw .
                                                Remove five screws .
                                                Release three latches from the Main Board
                                                Assembly.




                                             Main PCB Assembly




    Bottom Bracket
                                                                                Main Bracket




                                  - 10 -

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo