Service Manuals, User Guides, Schematic Diagrams or docs for : LeCroy LECROY AP034 AP034-OM-E-01

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download AP034-OM-E-01 documenatation <<

Text preview - extract from the document

                                                                    2YHUYLHZ



2YHUYLHZ
DESCRIPTION
                   The AP034 is a wide-band, active differential probe. The probe
                   features low noise, low input capacitance, high common mode
                   rejection, and Field Effect Transistor (FET) buffered inputs in the
                   probe head. The user-selectable offset gives the probe the
                   flexibility to measure a large range of signal types. Plug-on
                   attenuators and AC coupling accessories further extend the
                   application range. Included interconnect accessories allow
                   connection to surface mount and through-hole components with
                   minimal signal degradation. The input receptacles in the probe
                   head are compatible with standard 0.025 in. (0.635 mm) square
                   pins, which provide a convenient, low-cost method of creating
                   device characterization test fixtures.
                   The probe is powered directly from a LeCroy oscilloscope
                   through the ProBus interface. The ProBus interface also allows
                   local control of the probe through the oscilloscope user interface
                   and remote control through the interface buses, (GPIB, RS-232).
                   The optional ADPPS power supply allows the AP034 to be used
                   with other instruments such as spectrum analyzers, network
                   analyzers, and oscilloscopes without ProBus interface.
APPLICATIONS
                   The AP034 Active Differential Probe is ideal for acquiring high-
                   speed differential signals such as those found in disk drive read
                   channels, differential LAN, video, etc. The probe can be used
                   with spectrum analyzers to acquire signals in some RF systems
                   (for example, balanced IF mixers in hand-held cellular
                   telephones). The high impedance characteristics of both inputs
                   allow you to use the probe as an FET probe to make single-
                   ended measurements in digital systems without introducing a
                   ground loop, as a conventional FET probe would.




AP034-OM-E Rev D            ISSUED: January 2000                                 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo