Service Manuals, User Guides, Schematic Diagrams or docs for : Philips Household HD9040 service
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download service documenatation <<
Text preview - extract from the document
Bread Maker
HD9040
Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION REPAIR INSTRUCTIONS
- This product meets the requirements regarding
interference suppression on radio and TV. Note:
- After the product has been repaired, it should function
! Be aware of the sharp edges of the appliance,
Use hand cloves to repair the appliance.
properly and has to meet the safety requirements as
officially laid down at this moment. 1. Remove the Lid assy (4). Use a Phillips screwdriver to
remove screw A.
2. Remove the Control panel assy (3). Remove the 2 screw
TECHNICAL INFORMATION covers (12) out of the panel and use a Phillips screwdriver
to remove screws B.
- Voltage : 220 - 240 V, 50 - 60 Hz
(Tip: use an air pump to remove the screw covers)
- Power consumption : 850 W
3. Remove the Heating element assy (20). Remove the
- Power standby : 0.5 W 5 screw covers (13) out of the cover and use a Phillips
- Dimensions (w x d x h) : 275 x 420 x 305 mm screwdriver to remove the screws C and D. Disconnect
- Length power cable : 1.35 Meter the wires from the PCB.
- Colour setting : Black (Tip: use an air pump to remove the screw covers)
- SAP coding : HD9040 4. Remove the PCB (17). Use a Phillips screwdriver to
remove screws F and disconnect the wires.
5. Remove the Motor PCB (14). Use a Phillips screwdriver
DISASSEMBLY- AND RE-ASSEMBLY ADVISE to remove screws G and disconnect the wires.
6. Remove the motor assy (15). Use a Phillips screwdriver to
- Before you start dismantling!
remove screws H.
For your safety be sure the plug is
! OPTIONAL (accessories)
disconnected from the mains!
- No specific issues
Published by Philips Consumer Lifestyle Printed in the Netherlands ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo