Service Manuals, User Guides, Schematic Diagrams or docs for : Samsung LCD Proj LE40M91B LE40M91B.part2

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download LE40M91B.part2 documenatation <<

Text preview - extract from the document

                                                                        3 Alignments and Adjustments


3 Alignments and Adjustments

3-1 Service Instruction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
   Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
   of the TV. When inserting signal markers, do not allow the marker generator to distort
   test result.
5. Connect the TV only to an AC power source with voltage and frequency as specified on
   the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
   that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transform.




                                                                                                 3-1
3 Alignments and Adjustments

3-2 How to Access Service Mode
3-2-1 Entering Factory Mode
               "              "




      - If you have Factory remote - control




      - The buttons are active in the service mode.
         1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left
                                      Arrow Right, Menu, Enter, Number Key(0~9)
        2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -,
                                        Menu, TV/VIDEO(Enter)




3-2
                                                                3 Alignments and Adjustments

3-3 Factory Data
1. Calibration
2. Option Table     XXXX XXXX
3. White Balance
4. SVP-PX
5. Option Block
6. STV8257/STA323W
7. YC Delay
8. Adjust
9. I2C Check
10. W/B MOVIE
11. Checksum
12. Reset
13. Spread Spectrum
T-MSLMPEU-2000 (Main Micom Ver.)
T-MSLMPEUS-1000 (Sub Micom Ver.)
T-MSLMPEUW-1000 (MMS Micom Ver.)
Month / Day / Year / Hour / Min / Sec

1. Calibration
   1) AV Calibration
   2) Comp Calibration
   3) PC Calibration
   4) HDMI Calibration

2. Option Table    XXXX XXXX


  Inch Option        40"         Carrier Mute     OFF         TTX Group           Auto
    Gamma         AMLCD           Language       English     Auto Power           ON
 Panel Option     LED_120         Auto FM         ON        Magazine LNA          OFF
    2HDMI            ON         High Deviaion     OFF       VCOL.MODE            Large
      ----          OFF             TTX           ON         Shop Mode            OFF
    Hot Plug         ON            TTX List       Flof          Debug             OFF
   CLK C

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo