Service Manuals, User Guides, Schematic Diagrams or docs for : Samsung LCD TV LW-22A13 chassis PD-22EO Samsung LCD LW-22A13 ch[1]. PD-22EO

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Samsung LCD LW-22A13 ch[1]. PD-22EO documenatation <<

Text preview - extract from the document

                                                                               CONFIDENTIAL
4 Alignments and Adjustments
4-1 General Alignment Instuction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
   Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
   of the TV. When inserting signal markers, do not allow the marker generator to distort
   test result.
5. Connect the TV only to an DC power source with voltage and frequency as specified on
   the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
   that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transformer.




LW22A13W                                                                                    4-1
4 Alignments and Adjustments
                                                                                 CONFIDENTIAL
4-2 Factory Mode Adjustments
4-2-1 Entering Factory Mode
 1. To enter "Service Mode" Press the remote - control keys in this sequence :
    - If you do not have Factory remote - control




      - If you have Factory remote - control




4-2-2 Factory Mode Tree




4-2                                                                                     LW22A13W
4 Alignments and Adjustments
                               CONFIDENTIAL




LW22A13W                                 4-3
4 Alignments and Adjustments
                               CONFIDENTIAL
Memo




4-4                                   LW22A13W

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo