Service Manuals, User Guides, Schematic Diagrams or docs for : Samsung LCD TV LW15E23C LW15E23CXXEC_SERVICE_MANUAL
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download LW15E23CXXEC_SERVICE_MANUAL documenatation <<Text preview - extract from the document CONFIDENTIAL
4 Alignments and Adjustments
4-1 General Alignment Instruction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort
test results.
5. Connect the TV only to an DC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transformer.
LW15E23CB/LW17E24CB 4-1
4 Alignments and Adjustments
CONFIDENTIAL
4-2 Adjustment Instruction
4-2-1 Service Mode Screen
1. Adjustment RGB Contrast
RGB Bright
R Gain
G Gain
B Gain
FB Gain
2. Options Default : on
Help Osd : off
Suwon Ch Table
Spain Ch Table
Eeprom clear
3. Auto Color Auto color (PC)
Auto color (TV)
4. Reset
4-2-2 Service function
1. EEPROM Clear : Initially executed when replacing OTP.
2. TV Auto Color : Used to adjust TV image color.
3. PC Auto Color : Used to adjust PC image color.
4. Reset : Used after all adjustments.
5. Other functions shown are not service related.
4-2-3 Adjustment Sequence for ROM change only
EEPROM Clear TV auto color PC auto color RESET
(For ROM
change only)
4-2 LW15E23CB/LW17E24CB
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo