Service Manuals, User Guides, Schematic Diagrams or docs for : Samsung LCD TV LW15M13C 04_Assembly
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 04_Assembly documenatation <<
Text preview - extract from the document
3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
LW15M13C/LW17M11C TFT-LCD monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions:1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
3. R/Cover opening jig : BH81-00001A
3-1-1 LW15M13C
1. Place monitor face down on cushioned table.
SCART Remove 2 screws from the rear cover and
remove 4 screws from the LCD TV pull the
total stand and rear cover.
SCART
SCART
2. Disconnect speaker cable, IR cable and
SCART remove 6 screws from the MAIN board.
SCART
3. Remove the shield and disconnect inverter
cable and LVDS cable from the panel.
SCART
SCART
4. Remove 12 screws from the panel and lift up
the boards.
SCART
SCART
LW15M13C/LW17M11C 3-1
3 Disassembly and Reassembly
5. Remove 4 screws from the shield and lift up
the shield-panel.
6. Lift up the panel.
3-1-2 LW17M11C
1. Place monitor face down on cushioned table.
Remove 4 screws from the stand and remove
4 screws from the rear cover.
(CAUTION : Remove screw grip don't on the
SCART SCART stand than fall the stand from the top side of
the foot.)
2. Insert the opening drive into the grooves at
SCART each side and press until it clicks. Disconnect
IR cable and speaker cable from the shield.
3. Remove 8 screws from the shield and
disconnect shield.
SCART
SCART
4. Remove 4 screws IR board and remove 4
SCART
screws power board.
3-2 LW15M13C/LW17M11C
3 Disassembly and Reassembly
5. Remove 2 screws from the power shield and
disconnect inverter cable.
6. Disconnect LVDS cabel from the main board
and lift up the panel .
7. The panel has been disconnect from the above
figure.
LW15M13C/LW17M11C 3-3
3 Disassembly and Reassembly
3-2 Reassembly
Reassembly procedures are in the reverse order of disassembly procedures.
3-4 LW15M13C/LW17M11C
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo