Service Manuals, User Guides, Schematic Diagrams or docs for : TOSHIBA DVD SD-2700 hfe_toshiba_sd-2700_service_en

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
hfe_toshiba_sd-2700_service_en


>> Download hfe_toshiba_sd-2700_service_en documenatation <<

Text preview - extract from the document
                       FILE NO. 810-200101




SERVICE MANUAL


     DIGITAL VIDEO




    DVD VIDEO PLAYER
                     SD-2700




                                 Apr., 2001 5
LASER BEAM CAUTION LABEL




When the power supply is being turned on, you may not remove this laser cautions label. If it removes, radiation of a laser
may be recceived.


PREPARATION OF SERVICING
Pickup Head consists of a laser diode that is very susceptible to external static electricity.
Although it operates properly after replacement, if it was subject to electrostatic discharge during replacement,
its life might be shortened. When replacing, use a conductive mat, soldering iron with ground wire, etc. to
protect the laser diode from damage by static electricity.
And also, the LSI and IC are same as above.




                                                         Ground conductive

                                                         wrist strap for body.




                       Soldering iron

                       with ground wire

                       or ceramic type




                                                                                 1M   9
                                        Conductive mat
                                                                  The ground resistance

                                                                  between the ground line

                                                                  and the ground is less than 10   9   .
SAFETY NOTICE
                                              SAFETY PRECAUTIONS
LEAKAGE CURRENT CHECK
Plug the AC line cord directly into a 120V AC outlet (do      Measure the AC voltage across the 1500  resistor.
not use an isolation transformer for this check). Use an      The test must be conducted with the AC switch on and
AC voltmeter, having 5000  per volt or more sensitivity.      then repeated with the AC switch off. The AC voltage
Connect a 1500  10 W resistor, paralleled by a 0.15 



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo