Service Manuals, User Guides, Schematic Diagrams or docs for : TOSHIBA TV 21a3_chassis_s1e

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 21a3_chassis_s1e documenatation <<

Text preview - extract from the document

                                                                                                                            SCHEMATIC DIAGRAM                                     MODEL : 21A3E / 21A3TR
                                                                                                                                                                                          21A3M / 21A3MJ

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION", "SAFETY                                      NOTE:
PRECAUTION" AND "PRODUCT SAFETY NOTICE" ON THE MANUAL FOR THIS MODEL.                                                       1. RESISTOR        Resistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5%             4. Voltages read with DIGITAL MULTI-METER from point indicated to chassing ground, using a color bar signal with all
                                                                                                                                               tolerance carbon resistor, unless otherwise noted as the following marks.                           controls at normal, line voltage 220 volts.
CAUTION: The international hazard symbols "*" in the schematic diagram and the parts list designate components                                 1/2R = Metal or Metal oxide of 1/2 watt               1/2S = Carbon compsistion of 1/2 watt      5. Waveforms are taken receiving color bar signal with enough sensitivity.
which have special characteristics important for safety and should be replaced only with types identical to those in the                       1RF = Fuse resistor of 1 watt                         10W = Cement of 10 watt                    6. Voltage reading shown are nominal values and may vary 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo