Service Manuals, User Guides, Schematic Diagrams or docs for : Tektronix 85xx 8540 070-3761-00_8500_MDL_Series_Trigger_Trace_Svc_Sep82

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download 070-3761-00_8500_MDL_Series_Trigger_Trace_Svc_Sep82 documenatation <<

Text preview - extract from the document

8500
MODULAR MDL SERIES

TRIGGER TRACE
ANALYZER
INSTALLATION
SERVICE

INSTRUCTION MANUAL
~ronoo COMMITTED TO EXCELLENCE

WARNING
THE FOLLOWING SERVICING INSTRUCTIONS
ARE FOR USE BY QUALIFIED PERSONNEL ONLY.
TO AVOID PERSONAL INJURY, DO NOT
PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.

PLEASE CHECK FOR CHANGE INFORMATION
AT THE REAR OF THIS MANUAL.

This manual supports the following
TEKTRONIX products:
8500
MODULAR MDL SERIES
8550 8540 Products
Option Option TRIGGER TRACE
03 03 8550F03
8540F03
ANALYZER
INSTALLATION
SERVICE

Tektronix, Inc.
P.O. Box 500
Beaverton, Oregon 97077 Serial Number

070-3761-00 First Printing OCT 1981
Product Group 61 Revised SEP 1982
Copyright (~ 1981 by Tektronix, Inc. All rights reserved.
Contents of this publication may not be reproduced in any
form without the permission of Tektronix, Inc.

Products of Tektronix, Inc. and its subsidiaries are
covered by U.S. and foreign patents and/or pending patents.

TEKTRONIX, TEK, SCOPE-MOBILE, and ~ are registered
trademarks of Tektronix, Inc. TELEQUIPMENT is a registered
trademark of Tektronix U. K. Limited.

There is no implied warranty of fi tness for a particular
purpose. Tektronix, Inc. is not liable for consequential
damages.

Specification and price change privileges are reserved.

Printed in U.S.A.
TTA Installation

PREFACE

ABOUT THIS MANUAL

This manual contains information on how to install the Trigger Trace Analyzer
in a compatible TEKTRONIX microcomputer development system.

~
The Trigger Trace Analyzer should only be installed by a Tektronix
Field Service Specialist. Tektronix, Inc., is not obligated to
furnish service to repair damage resulting from attempts by
unauthorized personnel to install this product. Please call your
nearest Tektronix Field Service Office for installation.

MANUAL ORGANIZATION
This manual is divided into four sections:

Section contains an overview of the Trigger Trace Analyzer.

Section 2 contains instructions for configuring Trigger Trace Analyzer
jumpers and straps.

Section 3 provides instructions for installing the Trigger Trace Analyzer.

Section 4 discusses verification of the installed Trigger Trace Analyzer.

NOTE

In this manual, the terms "development system", "mainframe" , and
"microcomputer development system" apply equally to the 8550
Microcomputer Development Lab and to the 8540 Integration Unit.

CHANGE INFORMATION

Change notices are issued by Tektronix, Inc., to document changes to the
manual after it has been published. Change information is located at the
back of this manual, following the yellow tab marked "CHANGE INFORMATION &
TEST EQUIPMENT". When you receive the manual, you should enter any change
information into the body of the manual, according to instructions on the
change notice.

@ i
Preface - TTA Installation

REVISION HISTORY

As this manual is revised and reprinted, reVlSlon history information is
included on the text and diagram pages. Original manual pages are identified
with an '@' symbol at the bottom inside corner of the page. When existing
pages are revised, the '@' symbol is replaced with a revision code and date
(REV A OCT 1981). New pages added to a section, whether they contain old,
new, or revised information, will be identified with the '@' symbol and a
date (@ OCT 1981).

DOCUMENTATION OVERVIEW

The support documentation for TEKTRONIX microprocessor development systems
consists of three groups of manuals: user's manuals, service manuals, and
installation manuals.

Users manuals contain information required to operate the system and its
peripheral devices. Users manuals are identified by their grey covers and
are provided as standard accessories with the system package.

Installation manuals provide information required to install and verify the
operation of system components. Installation manuals have blue covers and
are provided as standard accessories with the system package.

Service manuals provide information required to test, troubleshoot and repair
a system and its peripheral devices. Service manuals are identified by their
blue covers and may be purchased as optional accessories.

ii @
TTA Installation

CONTENTS
Page
Sa f e t y Summ ar y

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo