Service Manuals, User Guides, Schematic Diagrams or docs for : apple misc apple_superdrive.hdi_20

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
apple_superdrive.hdi_20


>> Download apple_superdrive.hdi_20 documenatation <<

Text preview - extract from the document
   K Service Source




Apple SuperDrive
 K Service Source




Troubleshooting
 Apple SuperDrive
Troubleshooting                                                         General/ - 1


                  General
                  The Symptom Charts included in this chapter will help you
                  diagnose specific symptoms related to your product. Because cures
                  are listed on the charts in the order of most likely solution, try
                  the first cure first. Verify whether or not the product continues to
                  exhibit the symptom. If the symptom persists, try the next cure.
                  (Note: If you have replaced a module, reinstall the original module
                  before you proceed to the next cure.)

                  If you are not sure what the problem is, or if the Symptom Charts
                  do not resolve the problem, refer to the Flowchart for the product
                  family.

                  For additional assistance, contact Apple Technical Support.
      Troubleshooting                                                 Symptom Charts/ - 2

                        Symptom Charts
Drive does not come     1   Replace drive mechanism.
on; LED flashes once    2   Replace external drive cable.
or does not light       3   Replace LED assembly.

Drive reads but does    1   Verify that drive is 1.4 MB SuperDrive.
not write               2   Replace drive mechanism.
                        3   Replace external drive cable.

Drive does not read     1   Replace bad disk.
but LED comes on        2   Replace drive mechanism.

Drive does not eject    1   Replace drive mechanism.
disk                    2   Replace eject switch cable assembly.
      Troubleshooting                                                 Symptom Charts/ - 3

Drive functions, but    1   Replace LED assembly.
LED does not light      2   Replace drive mechanism.

MS-DOS drive does       To read and write files with either MS-DOS or 1.4 MB drive,
not recognize disk      format all disks with MS-DOS drive first.
formatted on 1.4 MB
SuperDrive

Drive reads/writes      1   Verify that drive is 1.4 MB SuperDrive.
to 800K disks but not   2   Replace drive mechanism.
to HD disks

Drive is unable to      1   Clean drive.
read; many file         2   Replace drive mechanism.
transfer errors occur
      Troubleshooting                                  Symptom Charts/ - 4

Drive fails to format   1   Clean drive.
                        2   Replace drive mechanism.
K Service Source




    Take Apart
Apple SuperDrive
      Take Apart        Top & Bottom Cover - 1


                   Top & Bottom
                   Cover
                   No preliminary steps are
                   required before you begin
                   this procedure.

                   1   Remove the four screws
                       from the case bottom
                       and pull the bottom
                       cover off the drive.

                   2   Remove the floppy metal
Metal Shield
                       shield from the drive
                       assembly.

                   3   Pull the cable anchor
                       free of the top case.
Take Apart        Top & Bottom Cover - 2

             4   Grip the case top in one
                 hand and the drive
                 assembly in the other.
                 Slide the drive assembly
                 as far as it will go to the
                 cable end of the case top.

             5   Lift the drive assembly
                 from the case top. Flip
                 the drive assembly
                 over. The drive
                 assembly and the case
                 top will be end to end.
Take Apart                        Top & Bottom Cover - 3

                             6   Using needlenose pliers,
                                 disconnect the following
                                 cable connectors:
                                 



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo