Service Manuals, User Guides, Schematic Diagrams or docs for : apple misc external_hard_drive_sc

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
external_hard_drive_sc


>> Download external_hard_drive_sc documenatation <<

Text preview - extract from the document
        K Service Source




External Hard Drive SC
     K Service Source




     Exploded View
External Hard Drive SC
   Exploded View                                                               1


                            Exploded View
                                          Cover




                                                          HDA-to-Case Cable


                                                               Fan Frame
       LED Cable Assembly
                                    Fan
                                                          SCSI Select Switch


                            SCSI Select Switch Cable




                                                       Power Supply
Hard Drive Mechanism
     K Service Source




         Take Apart
External Hard Drive SC
Take Apart                             Cover - 1


                     Cover
                     No preliminary steps are
                     required before you begin
                     this procedure.
             Cover
                     Note: This Take Apart
                     chapter applies only to the
                     Apple external hard drive
                     series (20SC, 40SC, 80SC,
                     or 160SC). For Take Apart
                     procedures internal drives,
                     see the manual for the
                     computer that contains the
                     drive.
Take Apart                       Cover - 2

             1   Locate the two holding
                 tabs on the rear of the
                 hard drive, inside the
                 ventilation slots.

             2   Using a jeweler's
                 screwdriver, press in
                 gently on the two
                 holding tabs as you push
                 the cover up slightly.
Take Apart                       Cover - 3

             3   Locate the four tab holes,
                 two on each side of the
                 hard drive.

             4   Starting with the rear
                 holes, insert the
                 jeweler's screwdriver
                 straight into each of the
                 holes. Nudge the cover
                 upward as you release
                 each tab.

             Note: Prying is not
             necessary and may damage
             the case.
Take Apart                            Power Supply - 4


                            Power Supply
                            Before you begin, remove
                            the cover.

                            Caution: Review the ESD
             Power Supply   precautions in Bulletins/
                            Safety.
Take Apart              Power Supply - 5

             1   Press down on the back
                 of the power supply,
                 push back the power
                 supply tab, and lift the
                 power supply.
     Take Apart                              Power Supply - 6

                                 2   Disconnect the power
                                     supply connector from
                                     the hard drive
                                     mechanism.
                  Power Supply
                                     Note: On some hard
       Fan                           drive mechanisms, the
     Cable                           power supply connector
                                     is on the opposite side of
                                     the hard drive.

                                 3   Disconnect the fan cable.

                                 4   Lift the power supply
                                     free.



Power Supply
   Connector
  Take Apart     Hard Drive Mechanism - 7


               Hard Drive
               Mechanism
               Before you begin, remove
               the cover.

               Caution: Review the ESD
               precautions in Bulletins/
               Safety.


Hard Drive
Mechanism
  Take Apart       Hard Drive Mechanism - 8

               1    Push back the large tab,
                    slide the hard drive
                    mechanism up, and rest
                    it on the edge of the case.




        Tab




Hard Drive
Mechanism
    Take Apart                                 Hard Drive Mechanism - 9

                                           2    Disconnect the power
                                                supply.

                                                Note: On some hard
SCSI Select
                                                drive mechanisms, the
Switch Connector
                                                power supply connector
                                                is located on the
                                                opposite side of the hard
                                                drive.

                                           3    Open the end tabs (if
                                                present) on the hard
                                                drive data cable
                                                connector and disconnect
  Power                                         the cable from the hard
  Supply                                        drive mechanism.
 Connector
                             HDA-to-Case
                             Cable

                   Hard Drive Mechanism
Take Apart   Hard Drive Mechanism - 10

             4   Disconnect the SCSI
                 select switch connector
                 and lift the hard drive
                 mechanism out of the
                 case.

             Note: Skip the following
             steps if you are replacing a
             20 MB or a 160 MB
             external hard drive. Return
             these drives to Apple in
             their original carriers.
Take Apart                                         Hard Drive Mechanism - 11

                                                   Note: Four screws hold the
                                                   5.25-inch hard drive along
                                                   the bottom edge of the
                                     SCSI Select   carrier.
                                     Switch
     LED Cable
                                                   5   Turn the drive over and
                                                       remove the four screws
                                                       near the center of the
                                                       metal carrier. Use this
                                                       carrier to install the
                                                       service replacement
                                                       module.

                                                   6   Disconnect the LED
                                                       cable and SCSI select
                                                       switch from the hard
                                                       drive mechanism.
                 Edge of 3.5 Drive
Take Apart   Hard Drive Mechanism - 12

             Note: Review "Carrier
             Removal," "Modifying 5.25
             Drives," or "Modifying 3.5
             Drives" in Additional
             Procedures before you
             install the new service
             replacement drive.
Take Apart                 SCSI Select Switch Cable - 13


                           SCSI Select
                           Switch Cable
                           Before you begin, remove
                           the following:
             SCSI Select   



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo