Service Manuals, User Guides, Schematic Diagrams or docs for : panasonic Audio SA-BT100EB 522116843285268SS

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
522116843285268SS


>> Download 522116843285268SS documenatation <<

Text preview - extract from the document
                      For Authorised Service Agents Only
                                                                                 Ref No:     522116843285268SS

                                                                                 Date               5/10/09
    TECHNICAL INFORMATION                                                                   Created by
                                                                                    Panasonic UK - Service Group

Document Category:            Knowledge Base


Subject:                      The volume goes up by itself up to maximum when the remote is used

Model(s) Affected:            SA-BT100EB, SC-BT100EB



Problem / Issue               Volume goes up by itself to maximum when a remote function is used

Solution:                     See notes below



The software of the unit should be checked and updated to version 1.7 or later

Go to the following internet link for updating instructions and software.

http://www.panasonic.net/support/consumer.html

On the above web page, select the options below (in turn) from the left side links

    1. DIGITAL AV
    2. BD

This will then take you to the BD (blu ray disc player) section showing various models and software updates.

Select the SCBT100 model for links to the software and procedure for checking the version.

How to reset the SC-BT100EB

If the update fails to cure the issue then try reinitialising the unit as per attached steps below:

NOTE: With the unit in standby, these front keys must be pressed down in the order shown below:

FWD > FWD+ STOP> FWD+STOP+ OPEN (also shown in back of user book page 40)

WITH ALL 3 FRONT BUTTONS FINALLY HELD DOWN UNTIL THE UNIT SHOWS:

`PLEASE WAIT `on the front FL display

It then changes to BYE and goes back into standby

To check the reset has taken place:

Ensure the unit is connected to a TV, the EASY SETTING menu mode will appear on the TV screen when
the BT100 is next turned on after the above reset procedure.


            Confidential                              Page 1                522116843285268SSREV1



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo