switch Turns on/off the main power. 1 Remote control signal receiver (front) 17 terminal 2 Power indicator Connect the supplied power cord. Displays the status of the power. Attention f Do not block the ventilation ports (intake and exhaust) of the projector. INF - 2 SECTION 1 SERVICE INFORMATION < RZ670/RW630 > 1. 2. Control panel 1 2 9 3 10 11 4 5 6 12 7 13 8 14 1 Power on button 9 button Starts projection when the

switch on the Displays or hides the main menu. projector is set to when the power is switched off Returns to the previous menu when a sub-menu is displayed. (standby mode). If you press the button on the control panel for at least 2 Power standby button three seconds while the on-screen display is off (hidden), the Sets the projector to the state where the projector is switched on-screen display is turned on. off (standby mode) when the

switch on the 10 button projector is set to and in projection mode. Adjusts the focus, zoom, and shift (position) of the lens. 3 button 11 button Switches the input to RGB1. Determines and executes an item in the menu screen. 4 button 12 button Switches the input to RGB2. Used to temporarily turn off the image. 5 button 13 asqw buttons Switches the input to DVI-D. Used to select items in the menu screen, change settings, and 6 button adjust levels. Switches the input to HDMI. Also used to enter a password in [SECURITY] or enter characters. 7 button Switches the input to DIGITAL LINK. 14 button Automatically adjusts the image display position while projecting 8 button the image. [PROGRESS] is displayed while in automatic Switches the input to SDI. adjustment. (Only for PT-RZ670) 1. 3. Connecting terminals 1 2 3 4 5 6 7 8 9 10 1 terminal/ terminal 6 (, , , , These are the terminals to connect the remote control for serial ) terminals control in a multiple projector environment. These are terminals to input RGB signals, YCBCR/YPBPR 2 terminal signals, Y/C signals, or video signals. This is a terminal to remotely control the projector using the 7 terminal external control circuit. This is a terminal to input RGB signals or YCBCR/YPBPR signals. 3 terminal 8 terminal This is the RS-232C compatible terminal to externally control This is the terminal to input DVI-D signals. the projector by connecting a computer. 9 terminal 4 terminal This is the terminal to input HDMI signals. This is a terminal to output the signal connected to the terminal IN> terminal. This is the LAN terminal to connect to the network. This is also 5 terminal used when connecting a video signal transmission device via This is the terminal to input SDI signals. the LAN terminal. (Only for PT-RZ670) Attention f When a LAN cable is directly connected to the projector, the network connection must be made indoors. INF - 3 SECTION 1 SERVICE INFORMATION < RZ670/RW630 > 1. 4. Remote control Front Top 1 16 2 3 4 5 11 6 12 7 13 Bottom 8 14 9 17 10 15 1 Power standby button 9 Number (<0> - <9>) buttons Sets the projector to the state where the projector is switched Used for entering an ID number or a password in a multiple off (standby mode) when the

switch on the projector environment. projector is set to and in projection mode. 10 button 2 Power on button Automatically adjusts the image display position while projecting Starts projection when the

switch on the the image. projector is set to when the power is switched off [PROGRESS] is displayed while in automatic adjustment. (standby mode). 11 button 3 Remote control indicator Used to temporarily turn off the image. Blinks if any button in the remote control is pressed. 12 button 4 Lens (, , ) buttons Displays the test pattern. Adjusts the projection lens. 13 button 5 button/ button/asqw buttons Displays the projector information. Used to navigate through the menu screen. 14 button 6 button Resets the content of the sub-menu to the factory default. Switches the on-screen display function on (display) or off 15 button (hide). Sets the ID number of the remote control in a multiple projector 7 Input selection (, , , environment.