Service Manuals, User Guides, Schematic Diagrams or docs for : panasonic Plasma TV TH-42PWD4 t05_07a

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download t05_07a documenatation <<

Text preview - extract from the document

       INPUT          Equipment       Setting          Alignment menu                                Procedure
                                                                       ** Adjust at the dark room.
1 NTSC                            Picture:          PANEL W/B
  Gray Scale                                 Normal        All cut off 1) Set white balance to Cool.
  Pattern                         Aspect:
                                                16:9                    2) Adjust All cut off to start some pixels emission
                                                                           at black 2% area and no emission at black 0% area.

                                                                        3) Write down all cut off data.

                                                                        4) Set white balance to Nornal.
          Black 2 %
  Black 0 %                                                             5) Adjust All cut off to set same data of Cool mode.

                                                                        6) Set white balance to warm.

                                                                        7) Adjust All cut off to set same data of Cool mode.

                                                                       ** Adjust at the dark room.
2 PAL                             Picture:          PANEL W/B
  Gray Scale                                 Normal        All cut off 1) Set white balance to Cool.
  Pattern                         Aspect:
                                                16:9                    2) Adjust All cut off to start some pixels emission
                                                                           at black 2% area and no emission at black 0% area.

                                                                        3) Write down all cut off data.

                                                                        4) Set white balance to Nornal.
          Black 2 %
  Black 0 %                                                             5) Adjust All cut off to set same data of Cool mode.

                                                                        6) Set white balance to warm.

                                                                        7) Adjust All cut off to set same data of Cool mode.


  SECAM                                                                 8) Change to SECAM signal.
  Gray Scale
  Pattern                                                               9) Copy PAL All cut off data to SECAM mode.

                                                                       ** Adjust at the dark room.
3 PC                              Picture:          PANEL W/B
  Gray Scale                                 Normal        All cut off 1) Set white balance to Cool.
  Pattern                         Aspect:
                                                16:9                    2) Adjust All cut off to start some pixels emission
                                                                           at black 2% area and no emission at black 0% area.

                                                                        3) Write down all cut off data.

                                                                        4) Set white balance to Nornal.
          Black 2 %
  Black 0 %                                                             5) Adjust All cut off to set same data of Cool mode.

                                                                        6) Set white balance to warm.

                                                                        7) Adjust All cut off to set same data of Cool mode.


  RGB                                                                   8) Change to RGB input signal.
  Gray Scale
  Pattern                                                               9) Copy PC All cut off data to RGB mode.

                                                                        10) Change to DVI input signal.
  DVI
  Gray Scale
  Pattern                                                               11) Copy PC All cut off data to DVI mode.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo