Service Manuals, User Guides, Schematic Diagrams or docs for : panasonic Tel AY-NE2000E Panasonic_AY-NE2000E_Nonlinear_Workstation
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Panasonic_AY-NE2000E_Nonlinear_Workstation documenatation <<
Text preview - extract from the document
ORDER NO. BSD9903011C8
Nonlinear Workstation Main Kit
AY-NE2000E
SPECIFICATIONS
Video
Video Input
[Analogue]
Input Connectors: 2 sources (selectable from Composite. Y/C, Y/PB/PR)
Composite: 1.0 V[p-p]/75 (BNC)
Y /C: Y: 1.0V[p-p]/75
C: 0.3 V[p-p]/75 (Y/C terminal)
Component: Y: 1.0V[p-p]/75 (BNC)
PB/PR: 0.525V[p-p] or 0.7V[p-p]/75 (BNC) (75% Colour Bar)
[SDI (Option)]
SMPTE259M 75 (BNC) with active loop-through
Video Output
[Analogue]
Output Connector: 2 outputs (simultaneously from Composite, Y/C, Y/PB/PR)
Composite: 1.0V[p-p]/75
Y/C: Y: 1.0V[p-p]/75
C: 0.3V[p-p]/75 (Y/C terminal)
Component: Y: 1.0V[p-p]/75 (BNC)
PB/PR: 0.525V[p-p] or 0.7V[p-p]/75 (BNC) (75% Colour Bar)
[SDI (Option)]
SMPTE259M 75 (BNC)
Synchronization
Gen-Lock Input: 1.0V[p-p]/75 (BNC), with loop-through output (x1)
ADV.REF output: Sync: 0.3V[p-p]/75
Burst: 0.3V[p-p]/75
C 1999 Matsushita Communication Industrial Co., Ltd.
All rights reserved. Unauthorized copying and
distribution is a violation of law.
Y WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could
result in serious injury or death.
This symbol warns the user that uninsulated voltage within
CAUTION the unit may have sufficient magnitude to cause electric
RISK OF ELECTRIC SHOCK shock. Therefore, it is dangerous to make any kind of contact
DO NOT OPEN
with any inside part of this unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER This symbol alerts the user that important literature concerning
SERVICEABLE PARTS INSIDE. the operation and maintenance of this has been included.
REFER SERVICING TO QUALIFIED SERVICE Therefore, it should be read carefully in order to avoid
PERSONNEL. any problems.
IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are indicated
by the " Y " mark on the schematic diagram and the replacement parts list. It is essential that these critical
parts should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
Audio Input
[Analogue]
Selectable from 4 sources
Source 1/2: +4dBu, 0dBu, ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo