Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan 350Z 2003-2007 Approved Nissan 350Z 2003 Acc
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Acc documenatation <<Text preview - extract from the documentACCELERATOR CONTROL SYSTEM
B ENGINE
A
ACC
SECTION
ACCELERATOR CONTROL SYSTEM C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Precautions for Battery Service ............................... 2. Tightening Torque .................................................... 4
.
Removal and Installation ......................................... 2
.
REMOVAL ............................................................ 2
. G
INSTALLATION .................................................... 2
.
INSPECTION AFTER INSTALLATION ................ 3 .
H
I
J
K
L
M
ACC-1
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Precautions for Battery Service ABS0035X
This vehicle is equipped with the automatic window adjusting function. When a door is opened, the window
automatically lowers slightly to avoid contact between the window and the side roof panel. After the door is
closed, the window will automatically raise slightly.
On vehicles equipped with the automatic window adjusting function, lower both the driver and front passenger
side windows before disconnecting the battery cables. This will prevent interference between the side window
and the roof panel when either door is opened/closed.
CAUTION:
After the battery cables are disconnected, do not open/close the driver and/or front passenger door
with the window in the full up position. The automatic window adjusting function will not work and the
side roof panel may be damaged.
Removal and Installation ABS0029K
SBIA0332E
1. Accelerator pedal assembly
REMOVAL
1. Remove accelerator pedal position sensor harness connector.
2. Loosen nuts, and remove accelerator pedal assembly.
CAUTION:
q Do not disassemble the accelerator pedal assembly. Do not remove the accelerator pedal posi-
tion sensor from the accelerator pedal assembly.
q Avoid impact from dropping etc. during handling.
q Be careful to keep the accelerator pedal assembly away from water.
INSTALLATION
Install in the reverse order of removal.
ACC-2
ACCELERATOR CONTROL SYSTEM
INSPECTION AFTER INSTALLATION
q Check that the accelerator pedal moves smoothly within the whole operation range. A
q Check that the accelerator pedal securely returns to the original position.
q For the electrical inspection of the accelerator pedal assembly, refer to EC-562, "DTC P2138 APP SEN-
SOR" . ACC
CAUTION:
When the harness connector of the accelerator pedal position sensor is disconnected, perform
Accelerator Pedal Released Position Learning. Refer to EC-50, "Accelerator Pedal Released C
Position Learning" .
D
E
F
G
H
I
J
K
L
M
ACC-3
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Tightening Torque ABS0029L
Unit: N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo