Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Murano 2003-2007.2009 Approved Nissan Murano 2003 ex
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ex documenatation <<Text preview - extract from the documentEXHAUST SYSTEM
B ENGINE
A
SECTION
EXHAUST SYSTEM
EX EX
C
D
E
CONTENTS
PREPARATION .......................................................... 2
. Checking Exhaust System ....................................... 3. F
Commercial Service Tools ....................................... 2
. Removal and Installation ......................................... 3
.
EXHAUST SYSTEM .................................................. 3
. REMOVAL ............................................................ 3
.
INSTALLATION .................................................... 4
. G
INSPECTION AFTER INSTALLATION ................. 4 .
SERVICE DATA AND SPECIFICATIONS (SDS) ....... 5 .
Tightening Torque .................................................... 5
.
H
I
J
K
L
M
Revision; 2004 April EX-1 2003 Murano
PREPARATION
PREPARATION PFP:00002
Commercial Service Tools ABS0033T
Tool name Description
Power tool Loosening nuts and bolts
PBIC0190E
Revision; 2004 April EX-2 2003 Murano
EXHAUST SYSTEM
EXHAUST SYSTEM PFP:20100
A
Checking Exhaust System ABS0033U
Check exhaust pipes, muffler and mounting for improper attachment,
leaks, cracks, damage or deterioration. EX
C
D
SMA211A
E
Removal and Installation ABS0033V
CAUTION:
q Be sure to use genuine exhaust system parts or equivalents which are specially designed for heat F
resistance, corrosion resistance, and shape.
q Perform the operation with the exhaust system fully cooled down because the system will be hot
just after the engine stops.
G
q Be careful not to cut your hand on the insulator edge.
H
I
J
K
L
M
SBIA0383E
1. Mounting bracket 2. Ring gasket 3. Exhaust front tube bracket
4. Exhaust front tube 5. Gasket 6. Center muffler
7. Main muffler 8. Mounting rubber
REMOVAL
Disconnect each joint and mounting using power tool.
Revision; 2004 April EX-3 2003 Murano
EXHAUST SYSTEM
INSTALLATION
Install in the reverse order of removal.
CAUTION:
q Always replace exhaust tube gaskets with new ones when reassembling.
q If the mounting rubber installed on body side is badly deformed, repair or replace it. If deposits
such as mud pile up on the mounting rubber, remove them.
q When installing the mounting insulator installed on body side avoid large gaps or interference
between the mounting rubber and each exhaust pipe.
q Remove deposits from the sealing surface of each connection. Connect them securely to avoid
gas leakage.
q Temporarily tighten mounting nuts on the exhaust manifold side and mounting bolts on the vehi-
cle side. Check each part for unusual interference, and then tighten them to the specified torque.
q When installing each mounting bracket, avoid twisting or unusual extension in up/down and right/
left directions.
INSPECTION AFTER INSTALLATION
q With the engine running, check exhaust tube joints for gas leakage and unusual noises.
q Check to ensure that mounting brackets and mounting rubbers are installed properly and free from undue
stress. Improper installation could result in excessive noise and vibration.
Revision; 2004 April EX-4 2003 Murano
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
A
Tightening Torque ABS0033X
Unit: N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo