Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Murano 2003-2007.2009 Approved Nissan Murano 2003 pb

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download pb documenatation <<

Text preview - extract from the document

PARKING BRAKE SYSTEM

F BRAKES

SECTION
PARKING BRAKE SYSTEM
PB B

E
CONTENTS
PARKING BRAKE SYSTEM ..................................... 2 . PARKING BRAKE SHOE .......................................... 5 . PB
On-Vehicle Service .................................................. 2
. Components ............................................................ 5
.
PEDAL STROKE .................................................. 2
. Removal and Installation ......................................... 5
.
INSPECT COMPONENTS ................................... 2 . REMOVAL ............................................................ 5
. G
ADJUSTMENT ..................................................... 2
. INSPECTION AFTER REMOVAL ........................ 6 .
PARKING BRAKE CONTROL .................................. 3 . INSTALLATION .................................................... 6
.
Components ............................................................ 3
. SERVICE DATA AND SPECIFICATIONS (SDS) ....... 7 .
H
Removal and Installation ......................................... 3
. Parking Drum Brake ................................................ 7
.
REMOVAL ............................................................ 3
. Parking Brake Control ............................................. 7
.
INSTALLATION .................................................... 4
.
I

Revision; 2004 April PB-1 2003 Murano
PARKING BRAKE SYSTEM

PARKING BRAKE SYSTEM PFP:36010

On-Vehicle Service AFS00182

PEDAL STROKE
q When parking brake pedal is operated with a force of 196 N (20 kg, 44 lb), make sure the stroke is within
the specified number of notches. (Check it by listening and counting the ratchet clicks.)
Pedal stroke : 3 to 4 notches
INSPECT COMPONENTS
q Make sure the components are attached properly (check for looseness, backlash, etc.).
q Check parking brake pedal assembly for bend, damage and cracks, and replace if necessary.
q Check cable for wear and damage, and replace if necessary.
q Check parking brake warning lamp switch for malfunction, and replace if necessary.
ADJUSTMENT
q To perform adjustment operations, remove tire from the vehicle with power tool.
1. Insert a deep socket wrench to rotate adjusting nut and loosen
the cable sufficiently. Then, return the pedal to the free height.
2. Using wheel nuts, fix the disc to the hub and prevent it from tilt-
ing.

PFIA0414E

3. Remove adjusting hole plug installed on the disc rotor. Using a
screwdriver, turn the adjuster as shown in the figure until the
disc rotor is locked. After locking, turn the adjuster in the oppo-
site direction by 5 or 6 notches.
4. Rotate the disc rotor to make sure there is no drag. Install the
adjusting hole plug.
5. Adjust cable as follows:
a. Operate pedal 10 or more times with a force of 294 N (30 kg, 66
lb).
b. Rotate adjusting nut with deep socket to adjust pedal stroke. PFIA0295E
NOTE:
Do not reuse the adjusting nut after removing it.
c. When parking brake pedal is operated with a force of 196 N (20 kg, 44 lb), make sure the stroke is within
the specified number of notches. (Check it by listening and counting the ratchet clicks.)
Pedal stroke : 3 to 4 notches
d. With the pedal completely returned, make sure there is no drag on the rear brake.

Revision; 2004 April PB-2 2003 Murano
PARKING BRAKE CONTROL

PARKING BRAKE CONTROL PFP:36010
A
Components AFS00183

PFIA0415E
K
1. Device assembly 2. Front cable 3. Return spring
4. Rear right cable 5. Rear left cable 6. Pin
7. Pin 8. Adjusting nut 9. Spring cap L
Removal and Installation AFS00184

REMOVAL
1. Remove front kicking plate (driver side). Refer to EI-32, "BODY SIDE TRIM" . M
2. Remove front body side welt (driver side). Refer to EI-32, "BODY SIDE TRIM" .
3. Remove instrument lower panel (driver side). Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
4. Remove dash side finisher (driver side). Refer to EI-32, "BODY SIDE TRIM" .
5. Remove side ventilator assembly (Left). Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
6. Remove relay box stay fixing screw.
7. Remove parking brake switch connector.
8. Remove adjusting nut.
9. Remove device assembly bolt, nut and remove device assembly from the vehicle.
10. Remove center console. Refer to IP-17, "CENTER CONSOLE ASSEMBLY" .
11. Remove front cable mounting bolts, nuts and remove front cable from the vehicle.
12. Remove center muffler. Refer to EX-3, "EXHAUST SYSTEM" .
13. Remove propeller shaft with AWD model. Refer to PR-4, "REAR PROPELLER SHAFT" .
14. Remove disc rotors. Refer to BR-34, "Removal and Installation of Brake Caliper Assembly" .
15. Remove rear cable from the toggle lever.

Revision; 2004 April PB-3 2003 Murano
PARKING BRAKE CONTROL

16. Remove right and left rear cables mounting nuts, bolts, and remove right and left rear cable assembly
from the vehicle.
INSTALLATION
1. Refer to "Component Parts Location" for tightening torque. Install in the reverse order of removal.
NOTE:
Do not reuse the adjusting nut.
2. Adjust the parking brake. Refer to PB-2, "ADJUSTMENT" .

Revision; 2004 April PB-4 2003 Murano
PARKING BRAKE SHOE

PARKING BRAKE SHOE PFP:44060
A
Components AFS00185

PFIA0443E
K
1. Return spring 2. Adjuster assembly 3. Shoe (Secondary)
4. Shoe (Primary) 5. Anti-rattle pin 6. Retainer
7. Anti-rattle spring 8. Toggle lever L
Removal and Installation AFS00186

REMOVAL
CAUTION: M
Clean dust on the disc and back plate with a vacuum dust collector. Do not blow with compressed air.
Be careful of the following:
q Remove the disc rotor only with the parking brake pedal completely in the returned position.
q If disc rotor cannot be removed, remove as follows.
1. Fix the disc rotor in place with wheel nuts and remove disc rotor
plug. Using a screwdriver, rotate adjuster wheel on the adjuster
assembly in direction B to retract and loosen brake shoes.

PFIA0309E

Revision; 2004 April PB-5 2003 Murano
PARKING BRAKE SHOE

INSPECTION AFTER REMOVAL
Lining Thickness Inspection
q Check thickness of lining.
Standard
Standard thickness (A) : 3.2 mm (0.126 in)
Repair limit thickness (A) : 1.5 mm (0.059 in)

SBR021A

Drum Inner Diameter Inspection
q Check drum inner diameter.
Standard
Standard inner diameter : 190 mm (7.48 in)
Maximum inner diameter : 191 mm (7.52 in)
Other Inspections
q Check shoe sliding surface for excessive wear and damage.
q Check anti-rattle pin for excessive wear and corrosion.
q Check return spring for sagging.
SBR768A
q Does the adjustor move smoothly?
q Check either visually or with a vernier caliper to see if there is any excessive wear, cracks, or damage
inside the drum.
INSTALLATION
Be careful of the following.
q Refer to "Component Parts Location" and apply brake grease to the specified points during assembly.
q There is difference of the adjusters orientation difference
between left and right. Assemble the adjuster so that threaded
part expands when rotating it in the direction shown by the
arrow.
q Shorten adjuster by rotating it.
q When disassembling the adjuster, apply PBC (Poly Butyl Cupry-
sil) grease or silicone based grease to the threads.
q After replacing brake shoes or disc rotors, or if brakes do not
function well, perform break-in operation as follows.
1. Adjust the parking brake pedal stroke to the specified stroke. SFIA0153E
2. Perform break-in (drag run) operation by driving the vehicle
under the following conditions:
Drive forward
q Vehicle speed approx. 40 km/h (25 MPH) set (forward)

q Parking brake operating force approx. 147 N (15 kg, 33 lb) set

q Distance approx. 100 m (328 ft)

3. After break-in operation, check lever stroke of the parking brake. Readjust if it is no longer at the specified
stroke.
q To prevent the lining from getting too hot, allow a cool off period of approximately 5 minutes after every
break-in operation.
q Do not perform excessive break-in operations, because it may cause uneven or early wear of the lining.

Revision; 2004 April PB-6 2003 Murano
SERVICE DATA AND SPECIFICATIONS (SDS)

SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
A
Parking Drum Brake AFS00187

Type DS19HC
Standard thickness (new) 3.2 mm (0.126 in) B
Brake lining
Wear limit thickness 1.5 mm (0.059 in)
Standard inner diameter (new) 190 mm (7.48 in)
Drum (disc) C
Wear limit of inner diameter 191 mm (7.52 in)

Parking Brake Control AFS00188
D
Control type Foot pedal
Number of notches [under force of 196 N (20 kg, 44 lb)] 3 to 4 notches
Number of notches E
1 notches
when warning lamp switch comes on

Revision; 2004 April PB-7 2003 Murano
SERVICE DATA AND SPECIFICATIONS (SDS)

Revision; 2004 April PB-8 2003 Murano

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo