Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Murano 2003-2007.2009 Approved Nissan Murano 2004 FAX
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download FAX documenatation <<
Text preview - extract from the document
FRONT AXLE
D DRIVELINE/AXLE
A
SECTION FAX FRONT AXLE
B
C
FAX
E
CONTENTS
PRECAUTIONS ......................................................... 2 . INSPECTION AFTER REMOVAL ........................ 8 . F
Caution .................................................................... 2
. INSTALLATION .................................................... 8 .
PREPARATION .......................................................... 3. Removal and Installation (Right Side) ..................... 8 .
Special Service Tools (SST) .................................... 3 . REMOVAL ............................................................ 9
. G
Commercial Service Tools ....................................... 3 . INSPECTION AFTER REMOVAL ...................... 10 .
NOISE, VIBRATION AND HARSHNESS (NVH) INSTALLATION .................................................. 10 .
TROUBLESHOOTING ............................................... 4 . Disassembly and Assembly (Left Side) ................. 10 .
H
NVH Troubleshooting Chart .................................... 4 . DISASSEMBLY .................................................. 11 .
FRONT WHEEL HUB AND KNUCKLE ..................... 5 . INSPECTION AFTER DISASSEMBLY ............... 12 .
On-Vehicle Inspection and Service ......................... 5 . ASSEMBLY ........................................................ 13.
WHEEL BEARING INSPECTION ........................ 5 . Disassembly and Assembly (Right Side) ............... 16 . I
Removal and Installation ......................................... 5 . DISASSEMBLY .................................................. 16 .
REMOVAL ............................................................ 5
. INSPECTION AFTER DISASSEMBLY ............... 18 .
INSPECTION AFTER REMOVAL ........................ 6 . ASSEMBLY ........................................................ 19. J
INSTALLATION .................................................... 6 . SERVICE DATA AND SPECIFICATIONS (SDS) ..... 22 .
FRONT DRIVE SHAFT .............................................. 7 . Wheel Bearing ....................................................... 22
.
Removal and Installation (Left Side) ....................... 7 . Drive Shaft ............................................................. 22
.
K
REMOVAL ............................................................ 7
.
L
M
Revision: 2004 November FAX-1 2004 Murano
PRECAUTIONS
PRECAUTIONS PFP:00001
Caution ADS000L1
Observe the following precautions when disassembling and servicing drive shaft.
q Perform work in a location which is as dust-free as possible.
q Before disassembling and servicing, clean the outside of parts.
q Prevention of the entry of foreign objects must be taken into account during disassembly of the service
location.
q Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
q Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
q Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Revision: 2004 November FAX-2 2004 Murano
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools (SST) ADS000CT
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
B
(Kent-Moore No.) Description
Tool name
C
HT72520000
(J25730-A)
Ball joint remover
Removing steering outer socket FAX
a: 33 mm (1.30 in)
b: 50 mm (1.97 in)
r: 11.5 mm (0.453 in)
NT546
E
KV40107500 F
( ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo