Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Murano 2003-2007.2009 Approved Nissan Murano 2004 SE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download SE documenatation <<

Text preview - extract from the document

SEAT

I BODY

SECTION SE SEAT
B

E
CONTENTS
PRECAUTIONS ......................................................... 3
. KEY FOB INTERLOCK OPERATION ................ 16 . F
Precautions for Supplemental Restraint System Component Parts And Harness Connector Location
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- ... 17
SIONER" ................................................................. 3
. CAN Communication System Description ............. 18 . G
Service Notice ......................................................... 3
. CAN Communication Unit ...................................... 18 .
Precautions for Work ............................................... 3
. Schematic .............................................................. 19
.
PREPARATION .......................................................... 4
. Wiring Diagram--AUT/DP-- ................................. 21 .
H
Special Service Tools .............................................. 4
. Terminals and Reference Values for BCM ............. 33 .
Commercial Service Tools ....................................... 4 . Terminals and Reference Values for Driver Seat
SQUEAK AND RATTLE TROUBLE DIAGNOSES..... 5 Control Unit ............................................................ 33
.
Work Flow ............................................................... 5
. Terminals and Reference Values for Automatic SE
CUSTOMER INTERVIEW .................................... 5 . Driver Positioner Control Unit ................................ 35 .
DUPLICATE THE NOISE AND TEST DRIVE ...... 6 . Work Flow .............................................................. 38
.
CHECK RELATED SERVICE BULLETINS .......... 6 . Preliminary Check ................................................. 38. J
LOCATE THE NOISE AND IDENTIFY THE SETTING CHANGE FUNCTION ........................ 38 .
ROOT CAUSE ..................................................... 6 . POWER SUPPLY AND GROUND CIRCUIT
REPAIR THE CAUSE .......................................... 6 . CHECK ............................................................... 39
.
K
CONFIRM THE REPAIR ...................................... 7 . CONSULT-II Function ............................................ 42 .
Generic Squeak and Rattle Troubleshooting .......... 7 . CONSULT-II INSPECTION PROCEDURE ......... 42 .
INSTRUMENT PANEL ......................................... 7 . SELF-DIAGNOSIS RESULTS ............................ 44 .
CENTER CONSOLE ............................................ 7 . CAN DIAGNOSIS SUPPORT MONITOR ........... 44 . L
DOORS ................................................................ 7
. DATA MONITOR ................................................ 45 .
TRUNK ................................................................. 8
. ACTIVE TEST .................................................... 45.
SUNROOF/HEADLINING .................................... 8 . CAN Communication Inspection Using CONSULT- M
SEATS .................................................................. 8
. II (Self-Diagnosis) .................................................. 46
.
UNDERHOOD ...................................................... 8 . Symptom Chart ...................................................... 46
.
Diagnostic Worksheet ............................................. 9 . Sliding Motor Circuit Check ................................... 48 .
CLIP AND FASTENER .............................................11 . Reclining Motor Circuit Check ............................... 49 .
Clip and Fastener ...................................................11
. Front Lifting Motor Circuit Check ........................... 50 .
AUTOMATIC DRIVE POSITIONER ......................... 12 . Rear Lifting Motor Circuit Check ............................ 52 .
System Description ............................................... 12. Pedal Adjusting Motor Circuit Check ..................... 53 .
MANUAL OPERATION ...................................... 12 . Mirror Motor LH Circuit Check ............................... 55 .
AUTOMATIC OPERATION ................................ 12 . Mirror Motor RH Circuit Check .............................. 56 .
FAIL- SAFE MODE ............................................ 13 . Sliding Sensor Circuit Check ................................. 59 .
CANCEL OF FAIL-SAFE MODE ........................ 13 . Reclining Sensor Circuit Check ............................. 60 .
MEMORY STORING AND KEY FOB INTER- Front Lifting Sensor Circuit Check ......................... 61 .
LOCK STORING ................................................ 14 . Rear Lifting Sensor Circuit Check ......................... 62 .
MEMORY OPERATION ..................................... 15 . Pedal Adjusting Sensor Circuit Check ................... 63 .
ENTRY OPERATION ......................................... 15 . Mirror Sensor LH Circuit Check ............................. 64 .
EXITING OPERATION ....................................... 15 . Mirror Sensor RH Circuit Check ............................ 66 .

Revision: 2004 November SE-1 2004 Murano
Sliding Switch Circuit Check .................................. 68 . HEATED SEAT .........................................................97.
Reclining Switch Check ......................................... 69 . Description .............................................................97
.
Front Lifting Switch Circuit Check .......................... 71 . Schematic ..............................................................98
.
Rear Lifting Switch Circuit Check .......................... 72 . Wiring Diagram--HSEAT-- ...................................99 .
Power Seat Switch Ground Circuit Check ............. 73 . FRONT SEAT ......................................................... 102
.
Pedal Adjusting Switch Circuit Check .................... 74 . Removal and Installation ...................................... 102 .
Door Mirror Remote Control Switch (Changeover DRIVER SIDE POWER SEAT .......................... 102 .
Switch) Circuit Check ............................................ 76 . PASSENGER SIDE MANUAL SEAT ................ 104 .
Door Mirror Remote Control Switch (Mirror Switch) REMOVAL ......................................................... 105.
Circuit Check ......................................................... 77
. INSTALLATION ................................................. 105 .
Door Mirror Remote Control Switch Ground Circuit SEATBACK TRIM AND PAD ............................ 106 .
Check .................................................................... 79
. REMOVAL OF SEATBACK ASSEMBLY ........... 107 .
Seat Memory Switch Circuit Check ....................... 80 . INSTALLATION OF SEATBACK ASSEMBLY ... 107 .
Seat Memory Indicator Lamp Circuit Check .......... 82 . SEAT CUSHION TRIM AND PAD (POWER
Door Mirror Sensor Power Supply and Ground Cir- SEAT) ................................................................ 107
.
cuit Check .............................................................. 83
. SEAT CUSHION TRIM AND PAD (MANUAL
Detention Switch Circuit Check ............................. 84 . SEAT) ................................................................ 107
.
Key Switch and Key Lock Solenoid Circuit Check... 86 REAR SEAT ............................................................ 109
.
UART Communication Line Circuit Check ............. 88 . Removal and Installation ...................................... 109 .
Lumber Support Circuit Check .............................. 89 . LH SIDE SEAT .................................................. 109 .
POWER SEAT .......................................................... 91. RH SIDE SEAT ................................................. 110 .
Automatic Drive Positioner Interlocking Power Seat 91 ... REMOVAL ......................................................... 111.
Schematic .............................................................. 92
. INSTALLATION ................................................. 111 .
Power Seat--SEAT--/Driver Side Without Auto- REMOVAL OF REMOTE CONTROL LEVER ... 112 .
matic Drive Positioner ............................................ 93 . INSTALLATION OF REMOTE CONTROL
Power Seat--Seat--/Passenger Side ................... 96 . LEVER .............................................................. 112
.

Revision: 2004 November SE-2 2004 Murano
PRECAUTIONS

PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" AIS0038H

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: D
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer. E
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. F
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
G
Service Notice AIS0038G

q When removing or installing various parts, place a cloth or padding onto the vehicle body to prevent
scratches. H
q Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to oil or
damage them.
q Apply sealing compound where necessary when installing parts. SE
q When applying sealing compound, be careful that the sealing compound does not protrude from parts.
q When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust pre-
J
vention measures.
Precautions for Work AIS0038I

q When removing or disassembling each component, be careful not to damage or deform it. If a component K
may be subject to interference, be sure to protect it with a cloth.
q When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the compo-
nent with a cloth or vinyl tape to protect it. L
q Protect the removed parts with a cloth and keep them.
q Replace a deformed or damaged clip.
q If a part is specified as a non-reusable part, always replace it with new one. M
q Be sure to tighten bolts and nuts securely to the specified torque.
q After re-installation is completed, be sure to check that each part works normally.
q Follow the steps below to clean components.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo