Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Murano 2003-2007.2009 Approved Nissan Murano 2007 FAX
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download FAX documenatation <<Text preview - extract from the documentFRONT AXLE
D DRIVELINE/AXLE
A
B
SECTION
FRONT AXLE C
FAX
E
CONTENTS
PRECAUTIONS ......................................................... 2 . INSPECTION AFTER REMOVAL ...................... 11 . F
Caution .................................................................... 2
. INSTALLATION .................................................. 12 .
PREPARATION .......................................................... 3. Removal and Installation (Right Side) ................... 12 .
Special Service Tools .............................................. 3 . COMPONENTS .................................................. 12 . G
Commercial Service Tools ....................................... 4 . REMOVAL .......................................................... 13
.
NOISE, VIBRATION AND HARSHNESS (NVH) INSPECTION AFTER REMOVAL ...................... 14 .
TROUBLESHOOTING ............................................... 5 . INSTALLATION .................................................. 14 .
H
NVH Troubleshooting Chart .................................... 5 . Disassembly and Assembly (Left Side) ................. 15 .
FRONT WHEEL HUB AND KNUCKLE ..................... 6 . COMPONENTS .................................................. 15 .
On-Vehicle Inspection ............................................. 6 . DISASSEMBLY .................................................. 15 .
WHEEL BEARING INSPECTION ........................ 6 . INSPECTION AFTER DISASSEMBLY ............... 16 . I
Removal and Installation ......................................... 6 . ASSEMBLY ........................................................ 17.
COMPONENTS ................................................... 6 . Disassembly and Assembly (Right Side) ............... 19 .
REMOVAL ............................................................ 6
. COMPONENTS .................................................. 19 . J
INSPECTION AFTER REMOVAL ........................ 7 . DISASSEMBLY .................................................. 19 .
INSTALLATION .................................................... 7 . INSPECTION AFTER DISASSEMBLY ............... 21 .
FRONT DRIVE SHAFT .............................................. 8 . ASSEMBLY ........................................................ 22.
K
On-Vehicle Inspection ............................................. 8 . SERVICE DATA AND SPECIFICATIONS (SDS) ..... 25 .
DRIVE SHAFT BOOT REPLACEMENT .............. 8 . Wheel Bearing ....................................................... 25
.
Removal and Installation (Left Side) ......................11 . Drive Shaft ............................................................. 25
.
COMPONENTS ..................................................11 . Dynamic Damper ................................................... 25 . L
REMOVAL ...........................................................11.
M
Revision: 2006 July FAX-1 2007 Murano
PRECAUTIONS
PRECAUTIONS PFP:00001
Caution NDS0008P
Observe the following precautions when disassembling and servicing drive shaft.
q Joint sub-assembly does not disassemble because it is non-overhaul parts.
q Perform work in a location which is as dust-free as possible.
q Before disassembling and servicing, clean the outside of parts.
q Prevention of the entry of foreign objects must be taken into account during disassembly of the service
location.
q Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
q Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
q Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Revision: 2006 July FAX-2 2007 Murano
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools NDS0008Q
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
B
(Kent-Moore No.) Description
Tool name
HT72520000 Removing steering outer socket C
(J-25730-A)
Ball joint remover
a: 33 mm (1.30 in)
FAX
b: 50 mm (1.97 in)
r: 11.5 mm (0.453 in)
NT546
E
KV40107300 Installing boot band
(
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo