Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Murano 2003-2007.2009 Approved Nissan Murano 2007 SE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download SE documenatation <<

Text preview - extract from the document

SEAT

I BODY

B
SECTION
SEAT C

E
CONTENTS
PRECAUTIONS ......................................................... 3
. KEYFOB INTERLOCK OPERATION ................. 16 . F
Precautions for Supplemental Restraint System Component Parts And Harness Connector Location
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- ... 17
SIONER" ................................................................. 3
. CAN Communication System Description ............. 18 . G
Service Notice ......................................................... 3
. CAN Communication Unit ...................................... 18 .
Precautions for Work ............................................... 3
. Schematic .............................................................. 19
.
PREPARATION .......................................................... 4
. Wiring Diagram -- AUT/DP -- .............................. 21 .
H
Special Service Tools .............................................. 4
. Terminals and Reference Values for BCM ............. 34 .
Commercial Service Tools ....................................... 4 . Terminals and Reference Values for Driver Seat
SQUEAK AND RATTLE TROUBLE DIAGNOSES..... 5 Control Unit ............................................................ 34
.
Work Flow ............................................................... 5
. Terminals and Reference Values for Automatic SE
CUSTOMER INTERVIEW .................................... 5 . Driver Positioner Control Unit ................................ 37 .
DUPLICATE THE NOISE AND TEST DRIVE ...... 6 . Work Flow .............................................................. 39
.
CHECK RELATED SERVICE BULLETINS .......... 6 . Preliminary Check ................................................. 39 . J
LOCATE THE NOISE AND IDENTIFY THE SETTING CHANGE FUNCTION ........................ 39 .
ROOT CAUSE ..................................................... 6 . CHECK POWER SUPPLY AND GROUND CIR-
REPAIR THE CAUSE .......................................... 6 . CUIT ................................................................... 40
.
K
CONFIRM THE REPAIR ...................................... 7 . CONSULT-II Function (AUTO DRIVE POS.) ......... 43 .
Generic Squeak and Rattle Troubleshooting .......... 7 . CONSULT-II START PROCEDURE ................... 43 .
INSTRUMENT PANEL ......................................... 7 . SELF-DIAGNOSIS RESULTS ............................ 43 .
CENTER CONSOLE ............................................ 7 . DATA MONITOR ................................................ 44 . L
DOORS ................................................................ 7
. ACTIVE TEST .................................................... 45 .
TRUNK ................................................................. 8
. Check CAN Communication System Inspection ... 45
SUNROOF/HEADLINING .................................... 8 . Symptom Chart ...................................................... 45. M
SEATS .................................................................. 8
. Check Sliding Motor Circuit ................................... 47 .
UNDERHOOD ...................................................... 8 . Check Reclining Motor Circuit ............................... 48 .
Diagnostic Worksheet ............................................. 9 . Check Front Lifting Motor Circuit ........................... 50 .
CLIP AND FASTENER .............................................11 . Check Rear Lifting Motor Circuit ............................ 51 .
Clip and Fastener ...................................................11
. Check Pedal Adjusting Motor Circuit ..................... 53 .
AUTOMATIC DRIVE POSITIONER ......................... 12 . Check Mirror Motor LH Circuit ............................... 54 .
System Description ............................................... 12. Check Mirror Motor RH Circuit .............................. 56 .
MANUAL OPERATION ...................................... 12 . Check Sliding Sensor Circuit ................................. 58 .
AUTOMATIC OPERATION ................................ 12 . Check Reclining Sensor Circuit ............................. 59 .
FAIL- SAFE MODE ............................................ 13 . Check Front Lifting Sensor Circuit ......................... 60 .
CANCEL OF FAIL-SAFE MODE ........................ 13 . Check Rear Lifting Sensor Circuit ......................... 61 .
MEMORY STORING AND KEYFOB INTER- Check Pedal Adjusting Sensor Circuit ................... 62 .
LOCK STORING ................................................ 14 . Check Mirror Sensor LH Circuit ............................. 63 .
MEMORY OPERATION ..................................... 15 . Check Mirror Sensor RH Circuit ............................ 65 .
ENTRY OPERATION ......................................... 15 . Check Sliding Switch Circuit .................................. 67 .
EXITING OPERATION ....................................... 15 . Check Reclining Switch ......................................... 68 .

Revision: 2006 July SE-1 2007 Murano
Check Front Lifting Switch Circuit .......................... 70 . HEATED SEAT .........................................................96.
Check Rear Lifting Switch Circuit .......................... 71 . Description .............................................................96
.
Check Power Seat Switch Ground Circuit ............. 72 . Schematic ..............................................................97
.
Check Pedal Adjusting Switch Circuit .................... 73 . Wiring Diagram -- HSEAT -- ................................98 .
Check Door Mirror Remote Control Switch FRONT SEAT ......................................................... 101
.
(Changeover Switch) Circuit .................................. 75 . Removal and Installation ...................................... 101 .
Check Door Mirror Remote Control Switch (Mirror POWER SEAT .................................................. 102 .
Switch) Circuit ........................................................ 76
. MANUAL SEAT ................................................. 103 .
Check Door Mirror Remote Control Switch Ground REMOVAL ......................................................... 104.
Circuit .................................................................... 77
. INSTALLATION ................................................. 104 .
Check Seat Memory Switch Circuit ....................... 78 . SEATBACK TRIM AND PAD ............................ 105 .
Check Seat Memory Indicator Lamp Circuit .......... 79 . REMOVAL OF SEATBACK ASSEMBLY ........... 106 .
Check Door Mirror Sensor Power Supply and INSTALLATION OF SEATBACK ASSEMBLY ... 106 .
Ground Circuit ....................................................... 81. SEAT CUSHION TRIM AND PAD (POWER
Check Detention Switch Circuit ............................. 82 . SEAT) ................................................................ 106
.
Check Key Switch Circuit (Without Intelligent Key) 84 ... REAR SEAT ............................................................ 107
.
Check Key Switch Circuit (With Intelligent Key) .... 85 . Removal and Installation ...................................... 107 .
Check UART Communication Line Circuit ............. 86 . LH SIDE SEAT .................................................. 107 .
Check Lumbar Support Circuit .............................. 88 . RH SIDE SEAT ................................................. 109 .
POWER SEAT .......................................................... 90 . REMOVAL ......................................................... 110.
Automatic Drive Positioner Interlocking Power Seat 90 ... INSTALLATION ................................................. 110 .
Schematic .............................................................. 91
. REMOVAL OF REMOTE CONTROL LEVER ... 111 .
Wiring Diagram -- SEAT --/Driver Side Without INSTALLATION OF REMOTE CONTROL
Automatic Drive Positioner .................................... 92 . LEVER .............................................................. 111
.
Wiring Diagram -- SEAT --/Passenger Side ........ 95 .

Revision: 2006 July SE-2 2007 Murano
PRECAUTIONS

PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" NIS001ET

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: D
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer. E
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. F
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
G
Service Notice NIS001EU

q When removing or installing various parts, place a cloth or padding onto the vehicle body to prevent
scratches. H
q Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to oil or
damage them.
q Apply sealing compound where necessary when installing parts. SE
q When applying sealing compound, be careful that the sealing compound does not protrude from parts.
q When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust pre-
J
vention measures.
Precautions for Work NIS001EV

q When removing or disassembling each component, be careful not to damage or deform it. If a component K
may be subject to interference, be sure to protect it with a cloth.
q When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the compo-
nent with a cloth or vinyl tape to protect it. L
q Protect the removed parts with a cloth and keep them.
q Replace a deformed or damaged clip.
q If a part is specified as a non-reusable part, always replace it with new one. M
q Be sure to tighten bolts and nuts securely to the specified torque.
q After re-installation is completed, be sure to check that each part works normally.
q Follow the steps below to clean components.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo