Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2000-2005 Approved Nissan Maxima 2004 EI

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download EI documenatation <<

Text preview - extract from the document

I BODY

B
SECTION
EXTERIOR & INTERIOR C

E
CONTENTS
PRECAUTIONS ......................................................... 3
. FRONT FENDER PROTECTOR .............................. 21 . F
Precautions for Supplemental Restraint System Removal and Installation ....................................... 21 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- FRONT ............................................................... 21
.
SIONER" ................................................................. 3
. REAR ................................................................. 22
. G
Precautions ............................................................. 3
. MUDGUARD ............................................................ 23
.
PREPARATION .......................................................... 4
. Removal and Installation ....................................... 23 .
Special Service Tools .............................................. 4
. LICENSE LAMP FINISHER ..................................... 24 .
H
Commercial Service Tools ....................................... 4 . Removal and Installation ....................................... 24 .
SQUEAK AND RATTLE TROUBLE DIAGNOSIS ..... 5 REAR AIR SPOILER ............................................... 25 .
Work Flow ............................................................... 5
. Removal and Installation ....................................... 25 .
CUSTOMER INTERVIEW .................................... 5 . ROOF SIDE MOLDING ............................................ 26 . EI
DUPLICATE THE NOISE AND TEST DRIVE ...... 6 . Removal and Installation ....................................... 26 .
CHECK RELATED SERVICE BULLETINS .......... 6 . REAR PILLAR FINISHER ........................................ 27 .
LOCATE THE NOISE AND IDENTIFY THE Removal and Installation ....................................... 27 . J
ROOT CAUSE ..................................................... 6 . DOOR OUTSIDE MOLDING .................................... 28 .
REPAIR THE CAUSE .......................................... 6 . Removal and Installation ....................................... 28 .
CONFIRM THE REPAIR ...................................... 7 . FRONT DOOR OUTSIDE MOLDING ................. 28 .
K
Generic Squeak and Rattle Troubleshooting .......... 7 . REAR DOOR OUTSIDE MOLDING ................... 28 .
INSTRUMENT PANEL ......................................... 7 . SIDE GUARD MOLDING ......................................... 29 .
CENTER CONSOLE ............................................ 7 . Removal and Installation ....................................... 29 .
DOORS ................................................................ 7
. REMOVAL .......................................................... 29
. L
TRUNK ................................................................. 8
. INSTALLATION .................................................. 29 .
SUNROOF/HEADLINER ...................................... 8 . DOOR FINISHER ..................................................... 30.
SEATS .................................................................. 8
. Removal and Installation ....................................... 30 . M
UNDERHOOD ...................................................... 8 . FRONT DOOR ................................................... 30 .
Diagnostic Worksheet ............................................. 9 . REAR DOOR ...................................................... 31.
CLIP AND FASTENER .............................................11 . BODY SIDE TRIM .................................................... 32.
Description .............................................................11
. Removal and Installation ....................................... 32 .
FRONT BUMPER .................................................... 14 . CENTER PILLAR LOWER GARNISH ................ 33 .
Removal and Installation ....................................... 14 . CENTER PILLAR UPPER GARNISH ................. 33 .
REAR BUMPER ...................................................... 16 . REAR PILLAR FINISHER .................................. 33 .
Removal and Installation ....................................... 16 . DASH SIDE FINISHER ...................................... 33 .
FRONT GRILLE ....................................................... 18
. REAR PARCEL SHELF FINISHER ......................... 34 .
Removal and Installation ....................................... 18 . Removal and Installation ....................................... 34 .
COWL TOP .............................................................. 19
. SUNSHADE ............................................................. 35
.
Removal and Installation ....................................... 19 . Component Parts and Harness Connector Location 35 ...
FRONT FENDER ..................................................... 20 . Wiring Diagram --SHADE-- ................................. 36 .
Removal and Installation ....................................... 20 . Removal and Installation ....................................... 38 .
FLOOR TRIM ........................................................... 39
.
Removal and Installation ....................................... 39 .

EI-1
HEADLINING ........................................................... 40
. TRUNK ROOM TRIM & TRUNK LID FINISHER ......42 .
Removal and Installation ....................................... 40
. Removal and Installation ........................................42
.

EI-2
PRECAUTIONS

PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS001K3

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: D
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer. E
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. F
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harness connec-
tors.
G
Precautions EIS001K4

q When removing or disassembling any part, be careful not to damage or deform it. Protect parts which may
get in the way with cloth. H
q When removing parts with a screwdriver or other tool, protect parts by wrapping them with vinyl or tape.
q Keep removed parts protected with cloth.
EI
q If a clip is deformed or damaged, replace it.
q If an unreusable part is removed, replace it with a new one.
q Tighten bolts and nuts firmly to the specified torque. J
q After re-assembly has been completed, make sure each part functions correctly.
q Remove stains in the following way.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo