Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2000-2005 Approved Nissan Maxima 2004 FAX
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download FAX documenatation <<
Text preview - extract from the document
D DRIVELINE/AXLE
A
B
SECTION
FRONT AXLE C
FAX
E
CONTENTS
PRECAUTIONS ......................................................... 2
. INSTALLATION .................................................... 8 . F
Precautions ............................................................. 2
. Disassembly and Assembly ..................................... 8 .
PREPARATION .......................................................... 3
. DISASSEMBLY .................................................... 8 .
Special Service Tools .............................................. 3
. ASSEMBLY .......................................................... 9
. G
Commercial Service Tools ....................................... 3 . FRONT DRIVE SHAFT ............................................ 11 .
NOISE, VIBRATION, AND HARSHNESS (NVH) Removal and Installation ....................................... 11 .
TROUBLESHOOTING ............................................... 4 . REMOVAL .......................................................... 11
.
H
NVH Troubleshooting Chart .................................... 4 . INSPECTION AFTER REMOVAL ...................... 13 .
WHEEL HUB AND KNUCKLE .................................. 5 . INSTALLATION .................................................. 13 .
On-Vehicle Service .................................................. 5
. Disassembly and Assembly ................................... 15 .
FRONT AXLE AND SUSPENSION ..................... 5 . DISASSEMBLY .................................................. 16 . I
FRONT WHEEL BEARING .................................. 5 . INSPECTION AFTER DISASSEMBLY ............... 17 .
Removal and Installation ......................................... 6. ASSEMBLY ........................................................ 18.
REMOVAL ............................................................ 7
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 21 . J
INSPECTION AFTER REMOVAL ........................ 8 . Drive Shaft ............................................................. 21
.
Wheel Bearing (Front) ........................................... 21 .
K
L
M
FAX-1
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions EDS000V0
q When installing rubber parts, final tightening must be car-
ried out under unladen condition* with tires on ground.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
q After installing removed suspension parts, check wheel
alignment and adjust if necessary.
q Use flare nut wrench when removing or installing brake
tubes.
q Always torque brake lines when installing.
SBR686C
FAX-2
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools EDS000V1
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
B
(Kent-Moore No.) Description
Tool name
HT72520000 Removing tie-rod outer end and lower ball
(J25730-B) joint C
Ball joint remover a: 33 mm (1.30 in)
b: 50 mm (1.97 in)
r: R11.5 mm (0.453 in)
FAX
NT546
KV38106700 Installing drive shaft E
(J34296) LH: KV38106700 (J34296)
KV38106800 RH: KV38106800 (J34297)
(J34297)
Differential side oil seal protector F
NT147
G
Commercial Service Tools EDS000V2
Tool name Description
H
1. Flare nut crowfoot Removing and installing each brake piping
2. Torque wrench a: 10 mm (0.39 in)
I
NT360
J
Power tool Loosening bolts and nuts
K
L
PBIC0190E
M
FAX-3
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart EDS000V3
Use the chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
FSU-4, "NVH Troubleshooting Chart"
Refer to DRIVE SHAFT in this chart.
WT-2, "NVH Troubleshooting Chart"
WT-2, "NVH Troubleshooting Chart"
BR-5, "NVH Troubleshooting Chart"
PS-5, "NVH Troubleshooting Chart"
Refer to AXLE in this chart.
FAX-15
FAX-6
FAX-5
--
--
--
Reference page
Improper installation, looseness
Wheel bearing damage
Joint sliding resistance
Excessive joint angle
Parts interference
ROAD WHEEL
DRIVE SHAFT
SUSPENSION
STEERING
Imbalance
BRAKES
TIRES
AXLE
Possible cause and SUSPECTED PARTS
Noise, Vibration ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo