Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2000-2005 Approved Nissan Maxima 2005 acc
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download acc documenatation <<Text preview - extract from the documentB ENGINE
A
ACC
SECTION
ACCELERATOR CONTROL SYSTEM C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 3 . F
Removal and Installation ......................................... 2
. Accelerator Control .................................................. 3
.
REMOVAL ............................................................ 2
. PEDAL TRAVEL ................................................... 3
.
INSTALLATION .................................................... 2
. G
H
I
J
K
L
M
Revision: July 2005 ACC-1 2005 Maxima
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Removal and Installation EBS00JTF
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
LBIA0333E
3. Remove the upper accelerator pedal nuts and lower accelerator
pedal bolt.
4. Remove the accelerator pedal and accelerator position sensor
assembly.
q For electrical inspection of the accelerator pedal position sen-
sor, refer to EC-642, "ACCELERATOR PEDAL POSITION
SENSOR" .
CAUTION:
q Do not disassemble the pedal assembly. Do not remove
the accelerator pedal position sensor from the pedal
assembly. LBIA0334E
q Avoid impact from dropping during handling.
q Keep the pedal assembly away from water.
INSTALLATION
1. Installation is in the reverse order of removal.
q Check the accelerator pedal for smooth operation. There should be no binding or sticking when apply-
ing or releasing the accelerator pedal.
q Check that the accelerator pedal moves through the full spec-
ified distance of pedal travel.
Pedal travel A : 52.6 - 58.2 mm (2.07 - 2.29 in)
CAUTION:
When the harness connector of the accelerator pedal posi-
tion sensor is disconnected, perform the "Accelerator pedal
released position learning". Refer to EC-90, "Accelerator
Pedal Released Position Learning" .
LBIA0062E
Revision: July 2005 ACC-2 2005 Maxima
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
A
Accelerator Control EBS00JTG
PEDAL TRAVEL
Accelerator control pedal - total travel 52.6 - 58.2 mm (2.07 - 2.29 in) ACC
C
D
E
F
G
H
I
J
K
L
M
Revision: July 2005 ACC-3 2005 Maxima
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: July 2005 ACC-4 2005 Maxima
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo