Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2000-2005 Approved Nissan Maxima 2005 lu
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download lu documenatation <<Text preview - extract from the documentB ENGINE
A
LU
SECTION
ENGINE LUBRICATION SYSTEM C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2. OIL PUMP ................................................................ 10
. F
Precautions for Liquid Gasket ................................. 2 . Removal and Installation ....................................... 10 .
REMOVAL OF LIQUID GASKET SEALING ......... 2 . REMOVAL .......................................................... 10
.
LIQUID GASKET APPLICATION PROCEDURE 2 ..... INSTALLATION .................................................. 10 . G
PREPARATION .......................................................... 3
. Disassembly and Assembly ................................... 11 .
Special Service Tools .............................................. 3. INSPECTION AFTER DISASSEMBLY ............... 11 .
Commercial Service Tool ........................................ 3 . ASSEMBLY ........................................................ 13
.
H
LUBRICATION SYSTEM ........................................... 5 . OIL COOLER ........................................................... 14
.
Lubrication Circuit ................................................... 5
. Removal and Installation ....................................... 14 .
System Drawing ...................................................... 6
. REMOVAL .......................................................... 14
.
ENGINE OIL .............................................................. 7
. INSPECTION AFTER REMOVAL ...................... 15 . I
Inspection ................................................................ 7
. INSTALLATION .................................................. 15 .
OIL LEVEL ........................................................... 7
. INSPECTION AFTER INSTALLATION ............... 15 .
OIL APPEARANCE .............................................. 7 . SERVICE DATA AND SPECIFICATIONS (SDS) ..... 16 . J
OIL LEAKAGE ...................................................... 7. Standard and Limit ................................................. 16
.
OIL PRESSURE CHECK ..................................... 7 . OIL PRESSURE ................................................. 16 .
Changing Engine Oil ............................................... 8 . REGULATOR VALVE ......................................... 16 .
K
OIL FILTER ................................................................ 9
. OIL PUMP .......................................................... 16
.
Removal and Installation ......................................... 9 . OIL CAPACITY (APPROXIMATE) ..................... 16 .
REMOVAL ............................................................ 9
.
INSTALLATION .................................................... 9 . L
M
Revision: July 2005 LU-1 2005 Maxima
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Liquid Gasket EBS00QB7
REMOVAL OF LIQUID GASKET SEALING
q After removing the bolts and nuts, separate the mating surface
using Tool and remove the liquid gasket sealing.
Tool number : KV10111100 (J-37228)
CAUTION:
Be careful not to damage the mating surfaces.
q In areas where the Tool is difficult to use, use a plastic hammer
to lightly tap (1) the Tool where the Silicone RTV Sealant is
applied. Use a plastic hammer to slide the Tool (2) by tapping on
the side.
CAUTION: WBIA0566E
If for some unavoidable reason a tool such as a flat-bladed
screwdriver is used, be careful not to damage the mating surfaces.
LIQUID GASKET APPLICATION PROCEDURE
1. Using a scraper, remove the old Silicone RTV Sealant adhering
to the gasket application surface and the mating surface.
q Remove the sealant completely from the groove of the gasket
application surface, bolts, and bolt holes.
2. Thoroughly clean the gasket application surface and the mating
surface and remove adhering moisture, grease and foreign
materials.
3. Attach the sealant tube to the tube presser.
q Use Genuine Silicone RTV Sealant or equivalent. Refer to GI-
43, "Recommended Chemical Products and Sealants" . PBIC0003E
4. Apply the sealant using Tool without breaks to the specified
location.
Tool number : WS39930000 ( -- )
q If there is a groove for the sealant application, apply the seal-
ant to the groove.
q As for the bolt holes, normally apply the sealant inside the
holes. If specified, it should be applied outside the holes.
Make sure to read the text of this manual.
q Within five minutes of the sealant application, install the mat-
ing component. WBIA0567E
q If the sealant protrudes, wipe it off immediately.
q Do not retighten after the installation.
q After 30 minutes or more have passed from the installation, fill
the engine with the specified oil and coolant. Refer to MA-9,
"Fluids and Lubricants" .
SEM159F
CAUTION:
Follow all specific instructions in this manual.
Revision: July 2005 LU-2 2005 Maxima
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools EBS00JBD
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
LU
(Kent-Moore No.)
Tool name
ST25051001
(J25695-1) C
Oil pressure gauge
Measuring oil pressure
Maximum measuring range: 2,452 kPa (25
kg-cm2 , 356 psi) D
NT050
ST25052000 Adapting oil pressure gauge to upper oil pan E
(J25695-2)
Hose
F
S-NT559
G
KV10115801 Removing and installing oil filter
(J38956)
Oil filter wrench
H
S-NT772
I
WS39930000 Pressing the tube of liquid gasket
( -- )
Tube presser J
K
NT052
KV10111100 Removing steel oil pan and rear timing chain
(J-37228) case L
Seal cutter
M
NT046
Commercial Service Tool EBS00JBE
Revision: July 2005 LU-3 2005 Maxima
PREPARATION
Tool name Description
Deep socket Removing and installing oil pressure switch
Deep socket size 26 mm, 3/8 drive
NT818
Power tools Loosening nuts and bolts
PBIC0190E
Revision: July 2005 LU-4 2005 Maxima
LUBRICATION SYSTEM
LUBRICATION SYSTEM PFP:15010
A
Lubrication Circuit EBS00JBF
LU
C
D
E
F
G
H
I
WBIA0318E
J
K
L
M
Revision: July 2005 LU-5 2005 Maxima
LUBRICATION SYSTEM
System Drawing EBS00JBG
SBIA0534E
Revision: July 2005 LU-6 2005 Maxima
ENGINE OIL
ENGINE OIL PFP:KLA92
A
Inspection EBS00JBH
OIL LEVEL
q Before starting the engine make sure the vehicle is parked on a LU
flat and level surface, then check the oil level. If the engine is
already running, turn it off and allow 10 minutes before check-
ing.
q Check that the oil level is within the low (L) and high (H) range C
as indicated on the dipstick.
q If the engine oil level is out of range, add oil as necessary. Refer
to MA-9, "RECOMMENDED FLUIDS AND LUBRICANTS" . D
JMA122D
E
OIL APPEARANCE
q Check the oil for white turbidity or heavy contamination.
q If the oil becomes turbid and white, it is highly probable that it is contaminated with coolant. F
OIL LEAKAGE
Check for oil leakage around the following areas: G
q Upper and lower oil pan
q Oil pan drain plug
q Oil pressure switch H
q Oil filter
q Oil cooler
q Water pump cover I
q Timing chain tensioner cover
q Intake valve timing (IVT) control cover
J
q Front cover
q Mating surface between cylinder block and cylinder head
q Mating surface between cylinder head and rocker cover K
q Crankshaft oil seal (front and rear)
OIL PRESSURE CHECK
L
WARNING:
q Be careful not to burn yourself, as engine oil may be hot.
q For M/T models, put the gearshift lever in the Neutral "N" position. For A/T models, put the selec-
tor lever in the Park "P" position. M
1. Check the engine oil level.
2. Disconnect the oil pressure switch harness connector.
3. Remove the oil pressure switch.
4. Install the pressure gauge.
SLC926
5. Start the engine and warm it up to normal operating temperature.
Revision: July 2005 LU-7 2005 Maxima
ENGINE OIL
6. Check oil pressure with engine running under no-load.
Engine Speed Approximate Discharge Pressure
Idle speed More than 98 kPa (1.0 kg/cm2 , 14 psi)
2,000 rpm 294 kPa (3.0 kg/cm2 , 43 psi)
CAUTION:
If the difference is extreme, check the oil passages and oil pump for leaks and blockages.
7. After the inspections, install the oil pressure switch as follows:
a. Remove the old sealant adhering to switch and engine.
b. Apply thread sealant and tighten the oil pressure switch to specification using Tool.
Use Genuine High Performance Thread Sealant, or equivalent. Refer to GI-43, "RECOMMENDED
CHEMICAL PRODUCTS AND SEALANTS" .
Oil pressure switch : 13 - 17 N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo