Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2000-2005 Approved Nissan Maxima 2005 rsu

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
rsu

>> Download rsu documenatation <<

Text preview - extract from the document

E SUSPENSION

B
SECTION
REAR SUSPENSION C

RSU
CONTENTS
PRECAUTIONS ......................................................... 2
. SHOCK ABSORBER ............................................ 9 . F
Precautions ............................................................. 2
. SUSPENSION ARM ............................................. 9 .
PREPARATION .......................................................... 3
. RADIUS ROD ..................................................... 10 .
Special Service Tools .............................................. 3
. FRONT LOWER LINK ........................................ 10 . G
Commercial Service Tools ....................................... 3 . REAR LOWER LINK AND COIL SPRING .......... 10 .
NOISE, VIBRATION, AND HARSHNESS (NVH) STABILIZER BAR ............................................... 11 .
TROUBLESHOOTING ............................................... 4 . Inspection .............................................................. 11
.
H
NVH Troubleshooting Chart .................................... 4 . SHOCK ABSORBER ASSEMBLY ...................... 11 .
REAR SUSPENSION ASSEMBLY ............................ 5 . SUSPENSION ARM ........................................... 11 .
Components ............................................................ 5
. RADIUS ROD ..................................................... 11 .
On-vehicle Service .................................................. 6
. FRONT LOWER LINK ........................................ 12 . I
Rear Wheel Alignment ............................................ 6 . UPPER RUBBER SEAT AND BUSHING ........... 12 .
PRELIMINARY INSPECTION .............................. 6 . REAR LOWER LINK AND COIL SPRING .......... 12 .
GENERAL INFORMATION AND RECOMMEN- STABILIZER BAR ............................................... 12 . J
DATIONS ............................................................. 6
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 13 .
THE ALIGNMENT PROCESS ............................. 7 . General Specifications (Rear) ............................... 13 .
CAMBER .............................................................. 7
. Rear Wheel Alignment (Unladen*) ........................ 13 .
K
TOE-IN ................................................................. 8
. Ball Joint ................................................................ 13
.
Removal and Installation ......................................... 9 . Wheelarch Height (Unladen*) ................................ 14 .
REAR SUSPENSION ASSEMBLY ...................... 9 .
L

Revision: July 2005 RSU-1 2005 Maxima
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions EES00191

q When installing each rubber part, final tightening must be
carried out under unladen condition* with tires on ground.
Oil will shorten the life of rubber bushings. Be sure to wipe
off any spilled oil.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
q Use flare nut wrench when removing or installing brake
tubes.
q After installing removed suspension parts, check wheel
alignment.
q Do not jack up at the radius rod, front and rear lower links. SBR686C

q Always tighten the brake lines to specification when installing.
q Lock nuts are not reusable parts; always use new ones.
When installing, do not wipe the oil off of the new lock nut before tightening.

Revision: July 2005 RSU-2 2005 Maxima
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EES001C4

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
B
(Kent-Moore No.)
Tool name
HT72520000 Removing upper ball joint
(J-25730-A) C
Ball joint remover

NT146

RSU
Commercial Service Tools EES00192

Tool name Description
Spring compressor Removing and installing coil spring F

NT717
H
Power tool Loosening bolts and nuts

PBIC0190E
J

Revision: July 2005 RSU-3 2005 Maxima
Symptom

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo