Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Micra 2003-2006 Approved 03k12e IP
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download IP documenatation <<Text preview - extract from the documentINSTRUMENT PANEL
I BODY
A
B
SECTION
INSTRUMENT PANEL C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2 . WORK ITEM TABLE ............................................. 5 . F
Precautions for Supplemental Restraint System REMOVAL ............................................................ 5
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- REMOVAL AND INSTALLATION OF INSTRU-
SIONER" ................................................................. 2
. MENT PAD ........................................................... 9
. G
Precautions ............................................................. 2
. REMOVAL AND INSTALLATION OF CONSOLE
CLIP AND FASTENER .............................................. 3 . BOX. ..................................................................... 9
.
List of Table ............................................................. 3
. CONSOLE BOX ................................................. 10 .
H
INSTRUMENT PANEL ASSEMBLY .......................... 4 . Disassembly and Assembly ................................... 11 .
Component Parts Location ...................................... 4 . INSTRUMENT PANEL PAD ............................... 11 .
Removal and Installation ......................................... 5 . GLOVE BOX COVER ASSEMBLY ..................... 11 .
IP
J
K
L
M
IP-1
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS004OW
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precautions EIS004OX
q Disconnect both battery cables in advance.
q Disconnect air bag system line in advance.
q Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
q Be careful not to scratch pad and other parts.
q When removing or disassembling any part, be careful not to damage or deform it. Protect parts, which
may get in the way with cloth.
q When removing parts with a screwdriver or other tool, protect parts by wrapping them with vinyl or tape.
q Keep removed parts protected with cloth.
q If a clip is deformed or damaged, replace it.
q If an unreusable part is removed, replace it with a new one.
q Tighten bolts and nuts firmly to the specified torque.
q After re-assembly has been completed, make sure each part functions correctly.
q Remove stains in the following way.
Water-soluble stains:
Dip a soft cloth in warm water, and then squeeze it tightly. After wiping the stain, wipe with a soft dry cloth.
Oil stain:
Dissolve a synthetic detergent in warm water (density of 2 to 3% or less), dip the cloth, then clean off the stain
with the cloth. Next, dip the cloth in fresh water and squeeze it tightly. Then clean off the detergent completely.
Then wipe the area with a soft dry cloth.
q Do not use any organic solvent, such as thinner or benzine.
IP-2
CLIP AND FASTENER
CLIP AND FASTENER PFP:76906
A
List of Table EIS004OH
Symbol No. Shape Removal and installation
B
C
D
E
MIIB0017E
F
G
H
IP
J
K
L
M
IP-3
INSTRUMENT PANEL ASSEMBLY
INSTRUMENT PANEL ASSEMBLY PFP:68200
Component Parts Location SMA for VIN >SJNxxAK12U1000000 EIS004OI
MIIB9075E
IP-4
INSTRUMENT PANEL ASSEMBLY
1. Passenger air bag module 2. Instrument mask 3. Upper instrument panel
4. Combination meter 5. Cluster lid "A" 6. Instrument side mask (RH)
A
7. Switch panel finisher 8. Instrument panel under tray 9. Side ventilator grille (RH)
10. Instrument finisher 11. Fuse block lid 12. Cluster lid C
B
13. Audio 14. Glove box striker 15. Instrument side mask (LH)
16. Side ventilator grille (LH) 17. Glove box cover assembly 18. Glove box lid
19. Tray 20. Air conditioner finisher 21. Steering column cover
C
22. Steering lock escutcheon 23. Instrument panel stay cover 24. Console box
25. Coin holder 26. Instrument panel & pad 27. Steering column protector
28. Central ventilator grille (LH) 29. Central ventilator grille (RH) 30. Console mask
D
Removal and Installation
SMA for VIN >SJNxxAK12U1000000
EIS004OJ
WORK ITEM TABLE
E
Instrument
panel Instrument Upper instru- Combination Audio, Car-
Component Parts Location
&Brake pad ment panel meter Wings unit
pad F
A. Front pillar garnish IP-5 [1] [1] [1] [1] Note
[1]
B. Upper instrument panel IP-6 [2] [2] [2] [2] [ 2 ]Note
G
C. Steering lock escutcheon IP-6 [3] [3]
D. Instrument panel under tray IP-6 [4]
E. Switch panel finisher IP-6 [5] [4] H
F. Steering column cover IP-6 [6] [5] [3]
G. Combination switch IP-6 [7] [6]
IP
H. Cluster lid "A" IP-7 [8] [7] [4]
I. Combination meter IP-7 [9] [8] [5]
J. Instrument finisher IP-7 [ 10 ] [9] [3] J
K. Cluster lid C IP-7 [ 11 ] [ 10 ] [4]
L. Air conditioner finisher IP-7 [ 12 ]
K
M. Instrument panel stay
IP-8 [ 13 ]
cover
N. Glove box lid IP-8 [ 14 ] [ 11 ]
L
O. Glove box cover assembly IP-8 [ 15 ] [ 12 ]
P. Side ventilator grille IP-8 [ 16 ] [ 13 ]
Q. Instrument side mask IP-8 [ 17 ] [ 14 ] M
R. Passenger seat air bag
IP-8 [ 18 ] [ 15 ]
module
S. Steering wheel IP-8 [ 19 ]
T. Instrument panel & pad IP-9 [ 20 ]
U. Instrument pad IP-9 [ 16 ]
[ ]: The number shows the removal order.
CAUTION:
q Only applies to combinations of Car-Wings unit and MD/CD integrated AM/FM electronic tuner
radio, and of pocket deck and MD/CD integrated AM/FM electronic tuner radio. Other companies
can only be removed using procedures [3] and [4].
REMOVAL
A. Front Pillar Garnish
Refer to EI-19, "BODY SIDE TRIM" in EI section.
IP-5
INSTRUMENT PANEL ASSEMBLY
B. Upper Instrument Panel
1. Insert a screwdriver wrapped with cloth into the instrument mask back notch to remove the instrument
mask. When vehicle has sunload sensor, disconnect the sensor harness. Refer to ATC-67, "SUNLOAD
SENSOR" in ATC section.
2. Insert a screwdriver, etc., wrapped with cloth into the upper instrument panel passenger side back edge
and disengage metal clips and lift up panel.
3. Hold the lifted up part by hand, remove metal clips engaged in instrument pad, and remove upper instru-
ment panel.
C. Steering Lock Escutcheon
Pull toward vehicle and remove.
CAUTION:
To install, align key cylinder end bottom protrusion with escutcheon inside notch and install.
D. Instrument Panel Under Tray
1. Disengage upper metal clips, hold bottom lid by hand, pull panel
forward, and disengage metal clips.
2. Remove being careful of interference from surrounding metal
objects.
MIIB0019E
E. Switch Panel Finisher
Hold lid side (arrow area) by hand, disengage metal clips, and then
pull forward and disengage plastic clips to remove.
MIIB0020E
F. Steering Column Cover
Upper
1. To make it easier to remove lower side, face steering pad top downward. (Tilt right side at about 160
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo