Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Altima 2006-2009 Approved TB Nissan Altima 2008 Hybrid ma
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ma documenatation <<Text preview - extract from the documentMAINTENANCE
A
SECTION
MAINTENANCE
MA B
C
D
E
CONTENTS
PREPARATION ........................................... 3
. OIL FILTER : Removal and Installation ..................17
. F
PREPARATION .................................................. 3
. SPARK PLUG (PLATINUM-TIPPED TYPE) ............18 .
Special Service Tool ................................................ 3
. SPARK PLUG (PLATINUM-TIPPED TYPE) : Re-
G
Commercial Service Tool ......................................... 3
. moval and Installation .............................................19
.
ON-VEHICLE MAINTENANCE .................... 4
. EVAP VAPOR LINES ...............................................20
.
EVAP VAPOR LINES : Inspection ..........................20 . H
GENERAL MAINTENANCE ............................... 4
.
Explanation General Maintenance ........................... 4
.
CHASSIS AND BODY MAINTENANCE ........... 21
IN-CABIN MICROFILTER .........................................21 . I
PERIODIC MAINTENANCE ............................... 6
.
IN-CABIN MICROFILTER : Removal and Installa-
Introduction of Periodic Maintenance ....................... 6 .
tion ..........................................................................21
.
Schedule 1 ............................................................... 6
.
Schedule 2 ............................................................... 8
. EXHAUST SYSTEM ..................................................21
. J
EXHAUST SYSTEM : Inspection ...........................21 .
RECOMMENDED FLUIDS AND LUBRI-
CANTS ...............................................................10
. CVT FLUID ................................................................21
. K
Fluids and Lubricants ............................................. 10
. CVT FLUID : Lubrication Mechanism .....................21 .
Engine Oil Recommendation ................................. 10 .
WHEELS ...................................................................22
.
ENGINE MAINTENANCE ..................................12
. WHEELS : Inspection .............................................22 . L
DRIVE BELTS .......................................................... 12
. BRAKE FLUID LEVEL AND LEAKS ........................23
.
DRIVE BELTS : Checking Drive Belts ................... 12 . BRAKE FLUID LEVEL AND LEAKS : Inspection ....23
M
DRIVE BELTS : Tension Adjustment ..................... 12 .
BRAKE LINES AND CABLES ..................................23
.
ENGINE COOLANT .................................................. 12
. BRAKE LINES AND CABLES : Inspection .............23 .
ENGINE COOLANT : Changing Engine Coolant .... 12 N
BRAKE FLUID ..........................................................23
.
INVERTER ASSEMBLY ........................................... 14
. BRAKE FLUID : Inspection .....................................23 .
INVERTER ASSEMBLY : Replacement ................ 14 . BRAKE FLUID : Refilling ........................................24
.
BRAKE FLUID : Bleeding Brake System ................24 . O
FUEL LINES ............................................................. 16
.
FUEL LINES : Inspection ....................................... 16 . DISC BRAKE ............................................................28
.
DISC BRAKE : Front Brake Pad .............................28 .
AIR CLEANER FILTER ............................................ 16
. MA
DISC BRAKE : Inspection ......................................28 .
AIR CLEANER FILTER : Removal and Installation DISC BRAKE : Front Brake Rotor ..........................28 .
.... 16 DISC BRAKE : Inspection ......................................28 .
DISC BRAKE : Rear Brake Pad .............................29 .
ENGINE OIL ............................................................. 17
.
DISC BRAKE : Inspection ......................................29 .
ENGINE OIL : Changing Engine Oil ....................... 17 .
DISC BRAKE : Rear Brake Rotor ...........................29 .
OIL FILTER ............................................................... 17
. DISC BRAKE : Inspection ......................................29 .
Revision: August 2007 MA-1 2008 Altima Hybrid
STEERING GEAR AND LINKAGE .......................... 29
. LOCKS, HINGES AND HOOD LATCH .................... 31 .
STEERING GEAR AND LINKAGE : Inspection ..... 30 . LOCKS, HINGES AND HOOD LATCH : Lubricat-
ing .......................................................................... 32
.
AXLE AND SUSPENSION PARTS .......................... 31
.
AXLE AND SUSPENSION PARTS : Inspection .... 31 . SEAT BELT, BUCKLES, RETRACTORS, AN-
CHORS AND ADJUSTERS ..................................... 32
.
DRIVE SHAFT .......................................................... 31
. SEAT BELT, BUCKLES, RETRACTORS, AN-
DRIVE SHAFT : Inspection ................................... 31 . CHORS AND ADJUSTERS : Inspection ................ 32 .
Revision: August 2007 MA-2 2008 Altima Hybrid
PREPARATION
< PREPARATION >
PREPARATION A
PREPARATION
Special Service Tool INFOID:0000000003078265
B
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
(Kent-Moore No.) Description C
Tool name
KV10115801 Removing and installing oil filter
(J38956) a: 64.3 mm (2.531 in) D
Oil filter wrench
E
S-NT375
F
Commercial Service Tool INFOID:0000000003078266
Tool name
G
Description
(Kent-Moore No.)
Power tool Loosening nuts and bolts
( -- ) H
I
PBIC0190E
J
Spark plug wrench Removing and installing spark plug
( -- )
K
L
PBIC2982E
M
N
O
MA
Revision: August 2007 MA-3 2008 Altima Hybrid
GENERAL MAINTENANCE
< ON-VEHICLE MAINTENANCE >
ON-VEHICLE MAINTENANCE
GENERAL MAINTENANCE
Explanation General Maintenance INFOID:0000000003078267
General maintenance includes those items which should be checked during the normal day-to-day operation
of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform
checks and inspections themselves or have their NISSAN dealers do them.
OUTSIDE THE VEHICLE
The maintenance items listed here should be performed from time to time, unless otherwise specified.
Item Reference page
Tires Check the pressure with a gauge, including the spare, at least once a month
and always prior to a long distance trips. Adjust to the specified pressure if nec- WT-38
essary. Check carefully for damage, cuts or excessive wear.
Wheel nuts When checking the tires, make sure no nuts are missing, and check for any
WT-34
loose nuts. Tighten if necessary.
Clean the windshield on a regular basis. Check the windshield at least every six
Windshield --
months for cracks or other damage. Repair as necessary.
Tire rotation Tires should be rotated every 12,000 km (7,500 miles). WT-34
Transmitter compo-
nent in tire pressure Replace grommet seal, valve core and cap of the transmitter in TPMS every tire
WT-33
monitoring system replacement by reaching wear limit of tire.
(TPMS)
Wheel alignment and If the vehicle pulls to either side while driving on a straight and level road, or if
balance you detect uneven or abnormal tire wear, there may be a need for wheel align-
FSU-6 and WT-34
ment. If the steering wheel or seat vibrates at normal highway speeds, wheel
balancing may be needed.
Windshield wiper
Check for cracks or wear if they do not wipe properly. --
blades
Doors and engine Check that all doors and the engine hood operate smoothly as well as the trunk
hood lid. Also make sure that all latches lock securely. Lubricate if necessary. Make
sure that the secondary latch keeps the hood from opening when the primary
MA-32
latch is released.
When driving in areas using road salt or other corrosive materials, check lubri-
cation frequently.
Lamps Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and
other lamps are all operating properly and installed securely. Also check head- --
lamp aim. Clean the headlamps on a regular basis.
INSIDE THE VEHICLE
The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle,
etc.
Item Reference page
Warning lamps and
Make sure that all warning lamps and chimes are operating properly. --
chimes
Windshield wiper and Check that the wipers and washer operate properly and that the wipers do not
--
washer streak.
Windshield defroster Check that the air comes out of the defroster outlets properly and in sufficient
--
quantity when operating the heater or air conditioner.
Steering wheel Check that it has the specified play. Be sure to check for changes in the steering
condition, such as excessive play, hard steering or strange noises. --
Free play: Less than 35 mm (1.38 in)
Seats Check seat position controls such as seat adjusters, seatback recliner, etc. to
make sure they operate smoothly and that all latches lock securely in every po-
sition. Check that the head restrains move up and down smoothly and that the --
locks (if equipped) hold securely in all latched positions. Check that the latches
lock securely for folding-down rear seatbacks.
Revision: August 2007 MA-4 2008 Altima Hybrid
GENERAL MAINTENANCE
< ON-VEHICLE MAINTENANCE >
Item Reference page
A
Seat belts Check that all parts of the seat belt system (e.g. buckles, anchors, adjusters
and retractors) operate properly and smoothly, and are installed securely. MA-32
Check the belt webbing for cuts, fraying, wear or damage.
Accelerator pedal Check the pedal for smooth operation and make sure the pedal does not catch B
--
or require uneven effort. Keep the floor mats away from the pedal.
Brakes Check that the brake does not pull the vehicle to one side when applied. --
Brake pedal Check the pedal for smooth operation and make sure it has the proper distance C
BR-11
under it when depressed fully.
Parking brake Check that the lever or pedal has the proper travel and make sure that the ve-
hicle is held securely on a fairly steep hill when only the parking brake is ap- PB-2 D
plied.
CVT P (Park) position On a fairly steep hill check that the vehicle is held securely with the selector le-
--
mechanism ver in the P (Park) position without applying any brakes. E
UNDER THE HOOD AND VEHICLE
The maintenance items listed here should be checked periodically (e.g. each time you check the engine oil or refuel).
Item Reference page
F
Windshield washer
Check that there is adequate fluid in the tank. --
fluid
G
Engine coolant level Check the coolant level when the engine is cold. MA-12
Inverter cooling level Check that the coolant level is between the "MAX" and "MIN" lines on the res-
--
ervoir.
H
Radiator and hoses Check the front of the radiator and clean off any dirt, insects, leaves, etc., that
may have accumulated. Make sure the hoses have no cracks, deformation, de- --
terioration or loose connections.
Brake fluid level Make sure that the brake fluid level is between the "MAX" and "MIN" lines on the
I
MA-23
reservoir.
Engine drive belts Make sure that no belt is frayed, worn, cracked or oily. MA-12
J
Engine oil level Check the level on the oil level gauge after parking the vehicle on a level spot
MA-17
and turning off the engine.
HEV (Hybrid Electric
Check for leaks. If you should notice any leaks, check for the cause and correct K
Vehicle) transaxle flu- TM-23
it immediately.
id
Exhaust system Make sure there are no loose supports, cracks or holes. If the sound of the ex-
haust seems unusual or there is a smell of exhaust fumes, immediately locate MA-21 L
the trouble and correct it.
Underbody The underbody is frequently exposed to corrosive substances such as those
used on icy roads or to control dust. It is very important to remove these sub- M
stances, otherwise rust will form on the floor pan, frame, fuel lines, high voltage
--
harness and around the exhaust system. At the end of winter, the underbody
should be thoroughly flushed with plain water, being careful to clean those areas
where mud and dirt can easily accumulate. N
Fluid leaks Check under the vehicle for fuel, oil, water or other fluid leaks after the vehicle
has been parked for a while. Water dripping from the air conditioner after use is
--
normal. If you should notice any leaks or gasoline fumes are evident, check for O
the cause and correct it immediately.
MA
Revision: August 2007 MA-5 2008 Altima Hybrid
PERIODIC MAINTENANCE
< ON-VEHICLE MAINTENANCE >
PERIODIC MAINTENANCE
Introduction of Periodic Maintenance INFOID:0000000003078268
Two different maintenance schedules are provided, and should be used, depending upon the conditions in
which the vehicle is mainly operated. After 60,000 miles (96,000 km) or 48 months, continue the periodic
maintenance at the same mileage/time intervals.
Follow Periodic Maintenance Schedule 1 if the driving habits frequently include Emission Control Sys-
MA-6
one or more of the following driving conditions: tem Maintenance
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo