Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Altima 2006-2009 Approved TB Nissan Altima 2009 Hybrid WT

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download WT documenatation <<

Text preview - extract from the document

SUSPENSION

WT
A

B
SECTION
ROAD WHEELS & TIRES C

WT
CONTENTS
BASIC INSPECTION ................................... 3
. Special Repair Requirement ...................................18
. F

DIAGNOSIS AND REPAIR WORKFLOW ......... 3
. C1729 VEHICLE SPEED SIGNAL .................... 19
Repair Work Flow ..................................................... 3
. Description ..............................................................19
.
G
DTC Logic ...............................................................19
.
INSPECTION AND ADJUSTMENT .................... 5
. Diagnosis Procedure ..............................................19 .
Preliminary Check .................................................... 5
. Special Repair Requirement ...................................19 .
Transmitter Wake Up Operation .............................. 5 . H
ID Registration Procedure ........................................ 6
. C1734 CONTROL UNIT .................................... 20
Description ..............................................................20
.
FUNCTION DIAGNOSIS .............................. 8
. DTC Logic ...............................................................20
. I
Diagnosis Procedure ..............................................20 .
TPMS .................................................................. 8
. Special Repair Requirement ...................................21 .
System Diagram ....................................................... 8
.
System Description .................................................. 8
. ECU DIAGNOSIS ........................................ 22
. J
System Components .............................................. 10
.
BCM (BODY CONTROL MODULE) ................. 22
DIAGNOSIS SYSTEM (BCM) ...........................11
. Reference Value .....................................................22
. K
CONSULT-III Function (BCM) ................................ 11
. Terminal Layout ......................................................26
.
Self-Diagnosis (Without CONSULT-III) .................. 12
. Physical Values ......................................................27
.
Wiring Diagram - TIRE PRESSURE MONITOR-
COMPONENT DIAGNOSIS ........................ 14
. ING SYSTEM - .......................................................45
. L
Self-Diagnosis (With CONSULT-III) .......................48 .
C1708 - C1711 DATA FROM TRANSMITTER
Self-Diagnosis (Without CONSULT-III) ..................49 .
NOT BEING RECEIVED ....................................14
. M
Description ............................................................. 14
. SYMPTOM DIAGNOSIS ............................. 51
.
DTC Logic .............................................................. 14
.
Diagnosis Procedure .............................................. 14. TPMS ................................................................. 51
Special Repair Requirement .................................. 15 . Symptom Table ......................................................51
. N

C1712 - C1715, C1720 - C1723, C1724 - LOW TIRE PRESSURE WARNING LAMP
C1727 TRANSMITTER MALFUNCTION ..........16
. DOES NOT TURN ON ....................................... 52 O
Description ............................................................. 16
. Low Tire Pressure Warning Lamp Does Not Come
DTC Logic .............................................................. 16
. On When Ignition Switch Is Turned On ..................52
.
Diagnosis Procedure .............................................. 16.
LOW TIRE PRESSURE WARNING LAMP P
Special Repair Requirement .................................. 17 .
STAYS ON ........................................................ 53
C1716 - C1719 TRANSMITTER PRESSURE Low Tire Pressure Warning Lamp Stays On When
MALFUNCTION .................................................18
. Ignition Switch Is Turned On ..................................53
.
Description ............................................................. 18
.
DTC Logic .............................................................. 18
. LOW TIRE PRESSURE WARNING LAMP
Diagnosis Procedure .............................................. 18. BLINKS ............................................................. 54

Revision: July 2008 WT-1 2009 Altima Hybrid
Low Tire Pressure Warning Lamp Flashes When Special Service Tool .............................................. 59
.
Ignition Switch Is Turned On ................................. 54
. Commercial Service Tools ..................................... 59
.

HAZARD WARNING LAMPS FLASH .............. 55
. ON-VEHICLE MAINTENANCE .................. 60
Hazard Warning Lamps Flash When Ignition
Switch Is Turned On .............................................. 55
. ROAD WHEEL .................................................. 60
.
Inspection ............................................................... 60
.
ID REGISTRATION CANNOT BE COMPLET-
ED ..................................................................... 56
. ON-VEHICLE REPAIR ............................... 61
ID Registration Cannot Be Completed .................. 56
.
TIRE PRESSURE RECEIVER .......................... 61
.
NOISE, VIBRATION AND HARSHNESS Removal and Installation ........................................ 61
.
(NVH) TROUBLESHOOTING ........................... 57
.
ROAD WHEEL TIRE ASSEMBLY ................... 62
.
NVH Troubleshooting Chart .................................. 57
.
Adjustment ............................................................. 62
.
PRECAUTION ............................................ 58
. REMOVAL AND INSTALLATION .............. 64
PRECAUTIONS ................................................ 58
.
TRANSMITTER ................................................ 64
.
Precaution for Supplemental Restraint System
Removal and Installation ........................................ 64
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ................................................................ 58
. SERVICE DATA AND SPECIFICATIONS
Necessary for Steering Wheel Rotation After Bat-
(SDS) .......................................................... 66
tery Disconnect ...................................................... 58
.
Precaution for work ................................................ 58
. SERVICE DATA AND SPECIFICATIONS
(SDS) ................................................................ 66
.
PREPARATION .......................................... 59
.
Road Wheel ........................................................... 66 .
PREPARATION ................................................ 59
. Tire ......................................................................... 66
.

Revision: July 2008 WT-2 2009 Altima Hybrid
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
BASIC INSPECTION A
DIAGNOSIS AND REPAIR WORKFLOW
Repair Work Flow INFOID:0000000004212485
B

WORK FLOW
C

M
ALEIA0003GB

WT-5, "Preliminary Check" WT-48, "Self-Diagnosis (With CONSULT-III)" WT-51, "Symptom Table" N
WT-49, "Self-Diagnosis (Without CONSULT-III)"

DETAILED FLOW
O
1.CUSTOMER INFORMATION
Interview the customer to obtain detailed information about the symptom.
P

>> GO TO 2
2.PRELIMINARY CHECK
Perform preliminary check. Refer to WT-5, "Preliminary Check".

>> GO TO 3
Revision: July 2008 WT-3 2009 Altima Hybrid
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
3.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-49, "Self-Diagnosis (Without CONSULT-III)" or WT-49, "Self-Diagno-
sis (Without CONSULT-III)".

>> GO TO 4
4.SYMPTOM
Check for symptoms. Refer to WT-51, "Symptom Table".

>> GO TO 5
5.MALFUNCTIONING PARTS
Repair or replace the applicable parts.

>> GO TO 6
6.DRIVE TEST
1. Perform a drive test.
2. Check the low tire pressure warning lamp.

>> GO TO 7
7.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-48, "Self-Diagnosis (With CONSULT-III)" or WT-49, "Self-Diagnosis
(Without CONSULT-III)".
Are any DTC's displayed?
YES >> GO TO 5
NO >> Inspection End

Revision: July 2008 WT-4 2009 Altima Hybrid
INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
A
Preliminary Check INFOID:0000000004212486

1.TIRE PRESSURE B
Check all tire pressures. Refer to WT-66, "Tire".
Do tire pressures match specification?
C
YES >> GO TO 2.
NO >> Adjust tire pressures to specified value.
2.LOW TIRE PRESSURE WARNING LAMP D
Check low tire pressure warning lamp activation.
Does the low tire pressure warning lamp activate for one second when ignition switch is turned ON?
YES >> GO TO 3. WT
NO >> Proceed TO WT-52, "Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch
Is Turned On".
3.BCM CONNECTOR F
1. Disconnect BCM harness connectors.
2. Check terminals for damage or loose connections.
3. Reconnect harness connectors. G
Are BCM connectors damaged or loose?
YES >> Repair or replace damaged parts.
NO >> GO TO 4. H
4.TRANSMITTER ACTIVATION TOOL
Check battery in transmitter activation tool. I
Is transmitter activation tool battery fully charged?
YES >> Perform self-diagnosis. Refer to WT-48, "Self-Diagnosis (With CONSULT-III)".
NO >> Replace battery in transmitter activation tool. J
Transmitter Wake Up Operation INFOID:0000000004212487

NOTE: K
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter
Activation Tool J-45295 before ID registration can be performed. L
1. Turn ignition switch ON. Push the transmitter activation tool
against the tire near the front left transmitter. Press the button for
5 seconds. The hazard warning lamps flash per the following
diagram. M

Tool number : (J-45295)
N

O
LEIA0036E

2. Repeat this procedure for each tire in the following order: FL, FR, RR, RL.
P

Revision: July 2008 WT-5 2009 Altima Hybrid
INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
3. When the BCM finishes assigning each tire ID, the BCM flashes the hazard warning lamps and sends
flashing indicator status by CAN according to the following time chart.

WEIA0177E

4. After completing wake up of all transmitters, make sure low tire pressure warning lamp goes out.
ID Registration Procedure INFOID:0000000004212488

ID REGISTRATION WITH TRANSMITTER ACTIVATION TOOL
NOTE:
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter
Activation Tool J-45295 before ID registration can be performed.
1. Connect CONSULT-III.
2. Select "ID REGIST" under BCM.
3. Push the transmitter activation tool against the tire near the front
left transmitter. Press the button for 5 seconds.

Tool number : (J-45295)

LEIA0036E

4. Register the IDs in order from FR LH, FR RH, RR RH and RR LH. When ID registration of each wheel has
been completed, the hazard warning lamps flash.

Step Activation tire position Hazard warning lamp CONSULT-III
1 Front LH
2 Front RH "YET"
2 times flashing
3 Rear RH "DONE"
4 Rear LH
5. After completing all ID registrations, press "END" to complete the procedure.
NOTE:
Be sure to register all of the IDs in order from FR LH, FR RH, RR RH, to RR LH, or the self-diagnostic results
display will not function properly.
ID REGISTRATION WITHOUT TRANSMITTER ACTIVATION TOOL
NOTE:
Revision: July 2008 WT-6 2009 Altima Hybrid
INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter A
Activation Tool J-45295 before ID registration can be performed.
1. Connect CONSULT-III.
2. Select "ID REGIST" under BCM. B
3. Adjust the tire pressures to the values shown in the table and drive the vehicle at 40 km/h (25 MPH) or
more for a few minutes.
C
Tire position Tire pressure kPa (kg/cm2, psi)
Front LH 250 (2.5, 36)
Front RH 230 (2.3, 33)
D

Rear RH 210 (2.1, 30)
Rear LH 190 (1.9, 27) WT
4. After completing all ID registrations, press "END" to complete the procedure.

Activation tire position CONSULT-III F
Front LH
Front RH "YET"
G
Rear RH "DONE"
Rear LH
5. Inflate all tires to proper pressure. Refer to WT-66, "Tire". H

Revision: July 2008 WT-7 2009 Altima Hybrid
TPMS
< FUNCTION DIAGNOSIS >
FUNCTION DIAGNOSIS
TPMS
System Diagram INFOID:0000000004212489

ALEIA0004GB

System Description INFOID:0000000004212490

BODY CONTROL MODULE (BCM)
The BCM is shown with the instrument panel LH removed. The BCM
reads the air pressure signal received by the tire pressure receiver,
and controls the low tire pressure warning lamp as shown below. It
also has a self-diagnosis function to detect a system malfunction.

Condition Low tire pressure warning lamp
System normal On for 1 second after ignition ON
Tire pressure less than 174.1 kPa (1.775
ON
kg/cm2 , 25.25 psi)
Tire pressure monitoring system malfunc- After key ON, flashes once per sec- ALEIA0005ZZ

tion ond for 1 minute, then stays ON

TRANSMITTER
A sensor-transmitter integrated with a valve is installed in each
wheel. It transmits a detected air pressure signal in the form of a
radio wave when the vehicle is moving. The radio signal is received
by the tire pressure receiver.

WEIA0137E

TIRE PRESSURE RECEIVER

Revision: July 2008 WT-8 2009 Altima Hybrid
TPMS
< FUNCTION DIAGNOSIS >
The tire pressure receiver (1) is located next to the steering column
assembly (2) and is shown with the lower instrument panel LH A
removed. The tire pressure receiver receives the air pressure signal
transmitted by the transmitter in each wheel.
Vehicle front. B

ALEIA0011ZZ

D
COMBINATION METER
The combination meter receives tire pressure status from the BCM
using CAN communication. When a low tire pressure condition is
sensed by the BCM, the low tire pressure warning lamp is activated. WT

LEIA0055E

TIRE PRESSURE WARNING CHECK CONNECTOR H
The tire pressure warning check connector can be grounded in order
to initiate self-diagnosis without a CONSULT-III. Refer to WT-12,
"Self-Diagnosis (Without CONSULT-III)". The tire pressure warning
I
check connector (1) is located behind the lower portion of the instru-
ment panel LH, above the hood release handle.

K
AWEIA0121ZZ

Revision: July 2008 WT-9 2009 Altima Hybrid
TPMS
< FUNCTION DIAGNOSIS >
System Components INFOID:0000000004212491

ALEIA0007ZZ

1. Tire pressure receiver M70 2. Tire pressure warning check connec- 3. Transmitters
tor M62
4. Combination meter M24 5. BCM M16, M17, M18, M19

Revision: July 2008 WT-10 2009 Altima Hybrid
DIAGNOSIS SYSTEM (BCM)
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
A
CONSULT-III Function (BCM) INFOID:0000000004212492

CONSULT-III DIAGNOSTIC MODES B
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.

Diagnostic mode Description C
Supports inspections and adjustments. Commands are transmitted to the BCM
Work Support for setting the status suitable for required operation, input/output signals are re-
ceived from the BCM and received data is displayed. D
Data Monitor Displays BCM input/output data in real time.
Active Test Operation of electrical loads can be checked by sending drive signal to them.
Self-Diagnostic Result Displays BCM self-diagnosis results.
WT

CAN Diagnostic Support Monitor The result of transmit/receive diagnosis of CAN communication can be read.
ECU Identification BCM part number can be read.
F
Configuration Performs BCM configuration read/write functions.

DESCRIPTION
During driving, the tire pressure monitoring system receives the signal transmitted from the transmitter G
installed in each wheel, and turns on the low tire pressure warning lamp when the tire pressure becomes low.
The control unit (BCM) for this system has pressure judgement and self-diagnosis functions.
H
FUNCTION
When the tire pressure monitoring system detects low inflation pressure or an internal malfunction, the low tire
pressure warning lamp in the combination meter comes on. The malfunction is indicated by the low tire pres-
sure warning lamp flashing. I
CONSULT-III Application to Tire Pressure Monitoring System

ITEM SELF-DIAGNOSTIC RESULTS DATA MONITOR
J

Front - Left transmitter

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo